tinygo

wasm stm32 webassembly microcontroller arm avr spi wasi adafruit arduino circuitplayground-express gpio i2c llvm microbit nrf51 nrf52 nrf52840 samd21 tinygo

History

Ayke van Laethem 2fb866ca86 avr: add attiny1616 support This is just support for the chip, no boards are currently supported. However, you can use this target on a custom board. Notes: - This required a new runtime and machine implementation, because the hardware is actually very different (and much nicer than older AVRs!). - I had to update gen-device-avr to support this chip. This also affects the generated output of other AVRs, but I checked all chips we support and there shouldn't be any backwards incompatible changes. - I did not implement peripherals like UART, I2C, SPI, etc because I don't need them. That is left to do in the future. You can flash these chips with only a UART and a 1kOhm resistor, which is really nice (no special hardware needed). Here is the program I've used for this purpose: https://pypi.org/project/pymcuprog/	1 year ago
..
gen-device-avr.go	avr: add attiny1616 support	1 year ago

Ayke van Laethem 2fb866ca86 avr: add attiny1616 support

This is just support for the chip, no boards are currently supported.
However, you can use this target on a custom board.

Notes:

  - This required a new runtime and machine implementation, because the
    hardware is actually very different (and much nicer than older
    AVRs!).
  - I had to update gen-device-avr to support this chip. This also
    affects the generated output of other AVRs, but I checked all chips
    we support and there shouldn't be any backwards incompatible
    changes.
  - I did not implement peripherals like UART, I2C, SPI, etc because I
    don't need them. That is left to do in the future.

You can flash these chips with only a UART and a 1kOhm resistor, which
is really nice (no special hardware needed). Here is the program I've
used for this purpose: https://pypi.org/project/pymcuprog/

1 year ago

gen-device-avr.go

avr: add attiny1616 support

1 year ago