add 3ACEU-Q conf file.

Signed-off-by: QiaoChong <qiaochong@loongson.cn>

Targets/Bonito3a780e/conf/3ACEU-Q

@@ -0,0 +1,264 @@
+# $Id: Bonito,v 1.1.1.1 2006/09/14 01:59:09 root Exp $ # #	GENERIC configuration for Galileo EV64240 # #  This file is supposed to be included by target file after #  endian has been defined.
+#
+machine         LS3afirewall        mips    # CPU Architecture, Platform
+config          pmon 
+option          VGAROM_IN_BIOS
+#
+#  Define target endian
+#
+makeoptions	ENDIAN=EL		# Little endian version.
+
+
+#include "conf/GENERIC_ALL"
+
+#
+# System Name and Target Name
+#
+option		SYSTYPE="\"Bonito\""
+option		TARGETNAME="\"Bonito\""
+
+#
+# Platform options
+#
+option      loongson3A3
+option      ARB_LEVEL
+option      DDR3_DIMM
+
+#option      AUTO_DDR_CONFIG
+option      USE_SB_I2C
+
+option		BONITOEL
+option      DEVBD2F
+option		LS3_SERVER
+option		MIPS
+option		INET
+option      LS3_HT              # Enable the IO cache coherent of HT
+#option      MCP68_IDE           # Enable the MCP68 IDE 0 channel
+#option      USE_LPC_UART
+#option      MULTI_CHIP
+option      ENABLE_SATA         #Enable SATA  ,when enable IDE can also use, when commended only IDE can use
+option		BOOTCORE_ID=0
+option		RESERVED_COREMASK=0xfff0
+
+#
+# Uart serial baud rate selection
+#
+#option      BONITO_33M
+option      BONITO_25M
+#option      BONITO_50M
+
+option  LOONGSON_3ASINGLE
+option		BOOT_PARAM
+select     	amd_780e
+
+## VGA option ##
+option      SERVER_3A
+option		RS780E
+option      USE_780E_VGA
+option      VGA_NO_ROM
+option		VGA_BASE=0xbe000000
+option      VRAM_SIZE=128
+#option		DEBUG_EMU_VGA
+#option      CONFIG_GFXUMA
+option      X1024x768	
+
+#
+# GPU driver selection. Selects for video
+# Disable all options below to disable gpu driver 
+# Enable all options below to enble gpu driver 
+#
+select		mod_x86emu_int10
+select		mod_framebuffer
+select		mod_vesa
+select		mod_vgacon
+option		VESAFB
+option		INTERFACE_3A780E
+
+#
+# flash type selection. Selects flash support
+#
+select		mod_flash_amd		# AMD flash device programming
+select		mod_flash_intel		# intel flash device programming
+select		mod_flash_sst		# intel flash device programming
+select		mod_debugger		# Debugging module
+select		mod_symbols		# Symbol table handling
+select		mod_s3load		# Srecord loading
+#select		mod_fastload		# LSI Fastload
+select		mod_elfload		# ELF loading
+
+#
+# Command selection. Selects pmon commands
+#
+select		cmd_newmt
+select		cmd_setup
+select		mod_display
+select		cmd_about		# Display info about PMON
+select		cmd_boot		# Boot wrapper
+select		cmd_mycmd		
+select		cmd_newmt
+select		cmd_cache		# Cache enabling
+#select		cmd_call		# Call a function command
+select		cmd_date		# Time of day command
+select		cmd_env			# Full blown environment command set
+select		cmd_flash		# Flash programming cmds
+select		cmd_hist		# Command history
+select		cmd_ifaddr		# Interface address command
+select		cmd_l			# Disassemble
+select		cmd_mem			# Memory manipulation commands
+select		cmd_more		# More paginator
+select		cmd_mt			# Simple memory test command
+select		cmd_misc		# Reboot & Flush etc.
+#select		cmd_stty		# TTY setings command
+select		cmd_tr			# Host port-through command
+select		cmd_devls		# Device list
+select		cmd_set			# As cmd_env but not req. cmd_hist
+select		cmd_testdisk
+#
+select		cmd_test		# test commands,test hardisk
+select		cmd_shell		# Shell commands, vers, help, eval
+
+#select		cmd_test_sata	# Sata signal test command
+select		cmd_test_spi
+#
+#
+# Platform options
+#
+select		mod_uart_ns16550	# Standard UART driver
+#option		CONS_BAUD=B9600
+option		CONS_BAUD=B115200
+select		ext2
+select		fatfs
+#select		mod_x86emu		# X86 emulation for VGA
+option 	MY40IO
+option		NOPCINAMES		# Save some space for x86emu
+#option		FASTBOOT
+#select	    vt82c686        #via686a/b code
+#option      VGA_BASE=0xb0000000
+
+#
+# Functional options.
+#
+option		NOSNOOP			# Caches are no-snooping
+
+#
+# HAVE options. What tgt level provide
+#
+option      LVDS            # NEC single channel 
+option		HAVE_TOD		# Time-Of-Day clock
+option		HAVE_NVENV		#  Platform has non-volatile env mem
+option		HAVE_LOGO		# Output splash logo
+option		USE_SUPERIO_UART
+#option		USE_LEGACY_RTC
+#option		GODSONEV2A
+#option		LINUX_PC
+#option		LONGMENG
+#option		RADEON7000
+#option 	DEBUG_EMU_VGA
+option		AUTOLOAD
+#option		CONFIG_PCI0_LARGE_MEM	
+#option		CONFIG_PCI0_HUGE_MEM	
+#option		CONFIG_PCI0_GAINT_MEM	
+option		CONFIG_CACHE_64K_4WAY
+option 	    NVRAM_IN_FLASH	
+
+#
+#  Now the Machine specification
+#
+mainbus0        at root
+localbus0	at mainbus0
+loopdev0	at mainbus0
+#fd0         at mainbus0
+pcibr0		at mainbus0
+#pcibr1		at mainbus0
+pci0		at pcibr?
+pci*		at pcibr?
+ppb*		at pci? dev ? function ?	# PCI-PCI bridges
+pci*		at ppb? bus ?
+
+
+#### SCSI support
+#siop*		at pci? dev ? function ?	# Symbios/NCR 53c...
+#scsibus*	at siop?
+#sd*		at scsibus? target ? lun ? 
+#cd*		at scsibus? target ? lun ? 
+
+#### Networking Devices
+#gt0		at localbus? base 4
+#gt1		at localbus? base 5
+#gt2		at localbus? base 6
+# fxp normally only used for debugging (enable/disable both)
+#fxp0        at pci? dev ? function ?        # Intel 82559 Device
+#inphy*      at mii? phy ?                   # Intel 82555 PHYs
+# rtl*        at pci? dev ? function ?
+#rte*		at pci? dev ? function ?
+#rtk*		at pci? dev ? function ?
+em*         at pci? dev ? function ?
+#igb*         at pci? dev ? function ?
+#select igb1
+
+#### USB
+#uhci*		 at pci? dev ? function ?
+#ohci*		 at pci? dev ? function ?
+#usb*		 at usbbus ?
+
+select      mod_usb
+select  	mod_usb_storage
+select      mod_usb_uhci
+select 	 	mod_usb_ohci
+select      mod_usb_kbd
+
+
+#### IDE controllers
+#option 		IDE_DMA
+pciide0 at pci0 dev 20 function 1 flags 0
+pciide* 	at pci ? dev ? function ? flags 0x0000
+
+#### IDE hard drives
+wd0		at pciide0 channel 1 drive ? flags 0x0000
+wd*		at pciide? channel ? drive ? flags 0x0000
+
+### LSI MegaRAID SAS RAID controllers
+mfi*	at pci?
+scsibus*	at mfi?
+sd*		at scsibus? target ? lun ?
+option	CONFIG_LSI_9260			# for LSI_9260-8i(2108) RAID card support
+
+#### Pseudo devices
+pseudo-device	loop	1	# network loopback
+
+ide_cd* 	at pciide? channel ? drive ? flags 0x0001
+select 		iso9660
+select		ramfiles
+select 		cmd_xyzmodem
+option IDECD 
+option HAVE_NB_SERIAL
+#option USE_ENVMAC
+#option LOOKLIKE_PC
+#select cmd_lwdhcp
+#select cmd_bootp
+option FOR_GXEMUL
+select fatfs
+#option FLOATINGPT
+#option PCI_IDSEL_VIA686B=17
+option PCI_IDSEL_SB700=14
+option WDC_NORESET
+select gzip
+option INPUT_FROM_BOTH
+option OUTPUT_TO_BOTH
+#option VIA686B_POWERFIXUP
+option DEVBD2F_VIA
+#option USE_GPIO_SERIAL
+option CONFIG_VIDEO_SW_CURSOR 
+select http
+#select nfs
+select tcp
+select inet
+select tftpd
+#select e100
+# SCSI RAID disk drive support
+select scsi_sd
+option PCI_BIGMEM_ADDRESS=0x70000000
+#option PCIVERBOSE=5
+#option NODOG
+option SUPERIO_CLOCK_24M
+option LOONGSON_3ACOME