This reverts commit 4e0a77f24a
The new VBIOS is aimed at the 4.19 kernel.
The 3.10 kernel has problems with compatibility.
Switch back to the old one
Change-Id: Id12dd58eca08318152ef7e17dca53c014bc44d24
Target: 3A3000_7A
1.You should make sure the phy is not power down if you do pcietest cmd
by define LS7A_PCIE_NO_POWERDOWN
2.If you test X4 port by X1 mode or X8 port by X4 mode,
you need force enable PortN by define such as FORCE_ENABLE_PCIE_F0_P123、FORCE_ENABLE_PCIE_F1_P1 and so on
Change-Id: I23afcc4bd12361c3fabcf60247379b73c3a8008f
1. signal test support for usbtest and satatest cmd.
2. ls7a_dbg support phy_cfg cmd. notice that: make sure the phy to be configured is not powerdown.
Change-Id: Ib86ba06b5554c87cb92bbd6c12e1f96d47683fa7
cmd "make dtb" can create dtb file: Bonito3a3000_7a.dtb, and link with gzrom.bin to create gzrom-dtb.bin
rename Targets/LS2K/conf/ls2k.dts to Targets/LS2K/conf/LS2K.dts
Change-Id: I8ba7dcd6b0e8cc875324666d5774cfd8fa9a10f6
1. The last commit(ac2f3ae6577602a870994c4e649c17f6db0560c3) modify the default PIX1 clock freqeuency
and cause the DVO1 display fail which proves the DC driver has bugs in PIX clock configure.
Currently, we modify the PIX1 clock freq to support 800x600 as default setting and keep the DC driver
from touching it. I will fix it later.
2. modify the HT bus back to HT3.0 mode and enable the soft freq configure which has been proven safe.
Change-Id: Ia4f0b081897732e3abb093b0a6893ecbfef7ab0d
wusheng
Chong Qiao
zhangbaoqi
Huangshuai
wuze
Chen Xinke
xuwenrui