mengxiaofu
9dc8cbd1f7
Add 3a-server ddr2/ddr3 function.
Now, ddr2/ddr3 can use the same codes and can be detected autoly.
Default:
ddr3 option has been open.So,you can use for ddr3-server.
If,you want to use ddr2:
you should close DDR3_DIMM option which is in "Targets/Bonito3aserver/conf/Bonito.3aserver" file.
Thanks chenxinke@ict.ac.cn and sizhiying@loongson.cn
Target:Bonito3aserver
13 years ago
sizhiying
cdaf5f9bf3
Enable "vers" command to show branch name for all target
Thanks xiaqichao <xiaqichao@ict.ac.cn>
Signed-off-by: mengxiaofu <mengxiaofu@ict.ac.cn>
13 years ago
wanghongmei
8a7a13422a
Add command (windows) to check L1XBAR and L2XBAR windows and interrupt
routing
add the command "windows" to check L1 cross bar and L2 cross bar
windows, use
this command to verify whther the configuraton fit below rules:
1.Move PCI MEM base from 0x10000000 to 0x40000000
2.The interrupt line register of all devices in the pci/pcie device on
3a780e
has bee assigned
Now the interrupt line checking has been done after setting interrupt
line register,
and only configuration with 2GX1 and 2GX2 memory can pass test. By the
way, replace
some unused code with interrupt talbe.
Target: Bonito3a780e
14 years ago
xiaqichao@ict.ac.cn
9cdf4d7f62
Support "vers' command to display Bonito type not just "Bonito"
Targets: Bonito.3a780e, Bonito3aserver, Bonito3amcp68, and so on
14 years ago
xiaqichao
03047253d1
Support spi cmds to Read/write LS3A3780E board SPI SST25VF032B flash
14 years ago
xiaqichao
e4079179e6
Device Test cmds Added
Can test net,hard disk, pci bus and keyboard
14 years ago
xiaqichao
f148e37710
Update PMON version information, now default main version NO. is PMON2011 2.1
14 years ago
xiaqichao
032e21abe3
DDR3 auto probe for same DDR controler supported
cmds : showwindows added
14 years ago
xiaqichao
9aa78e2d1b
UPDATED 3A3780E DDR3 paramter and added usbinstall and cdinstall cmds and add F2 key to install system
14 years ago
LI Wengang
1449210142
RS690E VGA display works correctly
1. Porting the 3A+690E x86emu module to 2G+690e platform and it works
correctly.
2. The HT frequency is adjusted to 800MHz.
3. The start address of PCI IO and memory space are adjusted according
to the 3A+690E platform.
4. The framebuffer address(0xb0000000) doesn't map through TLB. The
pcitlb.c is added in start.S, but it doesn't work.
5. Fix the IO-read/write base from 0xa000_0000 to 0x0000_0000 in
sys/linux/io.h.
15 years ago
root
ea2fd176b6
add cs5536 gpio debug cmd cs5536_gpio.
15 years ago
root
fb104e755f
split mycmd.c and setup.c to decrease pmon size.
15 years ago
root
0cacd4243f
add nfs support.
15 years ago
root
55791a9b73
add git version info.
16 years ago
root
62cf495077
make a common commit
16 years ago
root
8faa933f96
add missing file,change flash.
16 years ago
root
ae5e30a1c8
add bootmenu and password support.
16 years ago
root
d07414766d
add test for 2ffire board.
add COM3_BASE_ADDR define for boot debug program.
16 years ago
root
23dda08192
add raw_ether domain and proto for test net.
16 years ago
root
d64434874e
add tftpd
16 years ago
bennet
c33b672c97
add http load support.
16 years ago
root
fbf5ab84a2
add yaffs support.
16 years ago
root
0ed4cabe36
sisfb can use in pmon now.
16 years ago
root
f357a9d6ae
add sundance driver,delete gabages.
16 years ago
root
8929da276c
change soc mini pci ioaddress.
17 years ago
cpu
90ef79f53d
r1360@Knoppix: root | 2008-04-14 06:46:03 +0800
add loopdev support.
ramfs,mtdfs is char device.
loopdev is a block device.
losetup make chardev to be visited as a block device.
you can set env loop to let loopdevopen auto run losetup,such as on bootup.
loopdev now support unzip.
git-svn-id: file:///svn/pmon-all/pmon-all@364 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
a909d84ff3
r1333@Knoppix: root | 2008-04-11 16:55:57 +0800
fcr gzrom.bin can run.
git-svn-id: file:///svn/pmon-all/pmon-all@357 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
553acf8579
r1332@Knoppix: root | 2008-04-11 07:38:30 +0800
add nand support.
git-svn-id: file:///svn/pmon-all/pmon-all@356 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
f9420fc94f
r1276@Knoppix: root | 2008-04-10 08:13:52 +0800
add fcr soc support.
git-svn-id: file:///svn/pmon-all/pmon-all@354 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
688e7db8b6
r800@Knoppix: root | 2008-03-22 13:06:27 +0800
update xyzmodem.
git-svn-id: file:///svn/pmon-all/pmon-all@210 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
d34cc511a3
r797@Knoppix: root | 2008-03-22 12:33:35 +0800
add ymodem support from uboot.
git-svn-id: file:///svn/pmon-all/pmon-all@209 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
root
520160caaa
add xmodem,try zmodem.zmodem still have bug.
git-svn-id: file:///svn/pmon-all/pmon-all@144 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
root
0465dc00d5
add a x86like bios program named main
git-svn-id: file:///svn/pmon-all/pmon-all@114 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
root
f468be4538
add dhcpclent support
git-svn-id: file:///svn/pmon-all/pmon-all@98 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
cpu
a9d4f92f36
add sm502 support
git-svn-id: file:///svn/pmon-all/pmon-all@97 214b0138-1524-0410-9122-e5cb4b5bc56c
17 years ago
root
c2ce8aee46
add sm712 support
git-svn-id: file:///svn/pmon-all/pmon-all@88 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
d7aa49b2a6
add misiing file,test fd in developbd.
git-svn-id: file:///svn/pmon-all/pmon-all@84 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
c58c468655
Bonito2emcpu tested on new 4 cpu cpci board.
git-svn-id: file:///svn/pmon-all/pmon-all@61 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
b7d6b18dca
import initrd from lemote.
git-svn-id: file:///svn/pmon-all/pmon-all@42 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
ca8ab5f002
import elf64 loader from lemote.
git-svn-id: file:///svn/pmon-all/pmon-all@41 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
0da7929b64
add highmem env var.
git-svn-id: file:///svn/pmon-all/pmon-all@29 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
d1255f77f7
add info cmd.
git-svn-id: file:///svn/pmon-all/pmon-all@18 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
3cd87735ad
godson2e's cache file can not be applied in godson 2c.
do not know why.
git-svn-id: file:///svn/pmon-all/pmon-all@16 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
102f4c99f4
import fb support from lm.
git-svn-id: file:///svn/pmon-all/pmon-all@7 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago
root
88b8b8ec09
import pmon-all
git-svn-id: file:///svn/pmon-all/pmon-all@1 214b0138-1524-0410-9122-e5cb4b5bc56c
18 years ago