BDMR4101 BDMR4101 Description The BDMR4101 is the evaluation board for the 4101 TinyRISC Processor. It comes with it's own special power supply. Memory Map RAM a000.0000 1MB a100.0000 8MB Module (optional) ROM bfc0.0000 4 flash sockets U5,U6,U7,U8 DUART be00.0000 2681 Ethernet Sonic 10BaseT only Interrupts int0 2681 int1 Sonic int2 SerialICE Port + external pin if CFG:CPC0EN=1 int3 external pin if CFG:CPC1EN=1 int4 external pin if CFG:CPC2EN=1 int5 external pin if CFG:CPC3EN=1 External Connections Power - 5V DC via coaxial power connector RS232 J28 ChanA (PMON console) J27 ChanB SerialICE Port Clocks U52Clock for CPU. U53Clock for SerialICE Port. 1.8432MHz=115200, 20MHz=1250000. Jumpers Jumper In Jumper Out J1 Little Endian Big Endian J2 Wburstn - J3 No Dwrap Dwrap J4 No Iwrap Iwrap J5-J6 Sram wait states 0 ws (J6=In J5=In) 1 ws (J6=In J5=Out) 2 ws (J6=Out J5=In) 3 ws (J6=Out J5=Out) J7 BCLK=PCLK BCLK=0.5*PCLK J8 Arb_mode1 Arb_mode2 J9,J11 Icache refill size 1 word (J9=In J11=In) 2 word (J9=In J11=Out) 4 word (J9=Out J11=In) 8 word (J9=Out J11=Out) J10,J12 Default - J13,J15 Dcache refill size 1 word (J13=In J15=In) 2 word (J13=In J15=Out) 4 word (J13=Out J15=In) 8 word (J13=Out J15=Out) J14,J16 Default - J17-J18 on board 3.3v external 3.3v J19 Default Position 1-2 - J20 - Sonic Status J251-2 SerialICE Port Clock comes from oscillator (U53) 2-3 SerialICE Port Clock comes from SerialICE Port connector. A board will always transmit it's osc clock to the connector. It is swapped with the clock input on the other board in the cable. J26in - J27 (tty1 connector) acts as tty1. SerialICE uses SerialICE Port connector. out - J27 is connected to the SerialICE Port through level translators and tty1 is unavailable. This requires that the onboard osc be selected and installed. IceKernel » For the wiggler, J25 1-2, J26 in. » For tty1, J25 1-2, J26 out. ««««««««««««««««««««««««««««««««««««««««»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»» Navigation: Document Home | Document Contents | Document Index