You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
1.6 KiB
52 lines
1.6 KiB
Windows95 Using Hyperterminal
|
|
Windows95 Using Hyperterminal
|
|
|
|
Setup
|
|
|
|
» Select "Start-Programs-Accessories-Hyperterminal"
|
|
» Double Click on "Hypertrm"
|
|
» Enter name eg. "direct1", then "OK"
|
|
» Set "Connect using:" to "Direct to Com1", then "OK"
|
|
|
|
» Set "Bits per second:" to "9600"
|
|
» Set "Data bits:" to "8"
|
|
» Set "Parity:" to "None"
|
|
» Set "Stop bits:" to "1"
|
|
» Set "Flow control:" to "none"
|
|
» Select "OK"
|
|
|
|
|
|
Now press reset on the Monitor board. If you
|
|
don't see a banner message from PMON/IMON you might need a special cable.
|
|
|
|
If you get dropped characters when displaying some commands (eg "r"),
|
|
you probably need to enable the 16550 buffer. Select
|
|
File-Properties-Configure-Advanced and make sure that the FIFO
|
|
buffers are enabled. Note that you must Disconnect and Connect the Call
|
|
before this change will take effect.
|
|
|
|
If the command-line editing characters ^A, ^B etc. don't work, change
|
|
Propeties-Settings to vt100.
|
|
|
|
Sending Files
|
|
|
|
To send a text file to the target, perform the following steps:
|
|
|
|
» PMON load
|
|
» Hyperterminal
|
|
|
|
» Select "Transfer-Send Text File"
|
|
» Use Browser to select directory
|
|
» Set "Files of type:" to "All files"
|
|
» Select the .rec file, then "Open"
|
|
|
|
|
|
««««««««««««««««««««««««««««««««««««««««»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
|
|
Navigation:
|
|
Document Home |
|
|
Document Contents |
|
|
Document Index
|
|
|
|
**This file was converted from HTML to TEXT using a TRIAL version of**
|
|
**Markup Remover 1.1 (C) 1998 by Aquatic Moon Software http://www.aquaticmoon.com/**
|
|
**This message does not appear in files converted after the program has been liscensed.**
|
|
|