Update to recent libopencm3 to undo unwanted change.

libopencm3

@@ -1 +1 @@
-Subproject commit 505ac65c05b776af031dac3c15b69573b5709850
+Subproject commit 8435287300e5ca9af9f889c529e7b1fa019c42fb

src/platforms/f4discovery/platform.c

@@ -27,7 +27,7 @@
 #include "usbuart.h"
 #include "morse.h"
 
-#include <libopencm3/stm32/f4/rcc.h>
+#include <libopencm3/stm32/rcc.h>
 #include <libopencm3/cm3/scb.h>
 #include <libopencm3/cm3/nvic.h>
 #include <libopencm3/stm32/exti.h>

src/platforms/hydrabus/platform.c

@@ -27,7 +27,7 @@
 #include "usbuart.h"
 #include "morse.h"
 
-#include <libopencm3/stm32/f4/rcc.h>
+#include <libopencm3/stm32/rcc.h>
 #include <libopencm3/cm3/scb.h>
 #include <libopencm3/cm3/nvic.h>
 #include <libopencm3/stm32/exti.h>

src/platforms/native/platform.c

@@ -27,14 +27,14 @@
 #include "usbuart.h"
 #include "morse.h"
 
-#include <libopencm3/stm32/f1/rcc.h>
+#include <libopencm3/stm32/rcc.h>
 #include <libopencm3/cm3/scb.h>
 #include <libopencm3/cm3/scs.h>
 #include <libopencm3/cm3/nvic.h>
 #include <libopencm3/stm32/exti.h>
 #include <libopencm3/stm32/usart.h>
 #include <libopencm3/usb/usbd.h>
-#include <libopencm3/stm32/f1/adc.h>
+#include <libopencm3/stm32/adc.h>
 
 static void adc_init(void);
 static void setup_vbus_irq(void);
@@ -97,7 +97,7 @@ void platform_init(void)
 	initialise_monitor_handles();
 #endif
 
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
 
 	/* Enable peripherals */
 	rcc_periph_clock_enable(RCC_USB);

src/platforms/native/usbdfu.c

@@ -44,7 +44,7 @@ int main(void)
 
 	dfu_protect(false);
 
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
 	systick_set_clocksource(STK_CSR_CLKSOURCE_AHB_DIV8);
 	systick_set_reload(900000);
 

src/platforms/stlink/platform.c

@@ -52,7 +52,7 @@ void platform_init(void)
 	void initialise_monitor_handles(void);
 	initialise_monitor_handles();
 #endif
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
 	if (rev == 0) {
 		led_idle_run = GPIO8;
 		srst_pin = SRST_PIN_V1;

src/platforms/stlink/platform.h

@@ -29,7 +29,7 @@
 #include "timing_stm32.h"
 
 #include <libopencm3/cm3/common.h>
-#include <libopencm3/stm32/f1/memorymap.h>
+#include <libopencm3/stm32/memorymap.h>
 #include <libopencm3/usb/usbd.h>
 
 #ifdef ENABLE_DEBUG

src/platforms/stlink/usbdfu.c

@@ -65,7 +65,7 @@ int main(void)
 		dfu_jump_app_if_valid();
 	dfu_protect(false);
 
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
 	systick_set_clocksource(STK_CSR_CLKSOURCE_AHB_DIV8);
 	systick_set_reload(900000);
 

src/platforms/swlink/platform.c

@@ -27,13 +27,13 @@
 #include "cdcacm.h"
 #include "usbuart.h"
 
-#include <libopencm3/stm32/f1/rcc.h>
+#include <libopencm3/stm32/rcc.h>
 #include <libopencm3/cm3/scb.h>
 #include <libopencm3/cm3/scs.h>
 #include <libopencm3/cm3/nvic.h>
 #include <libopencm3/stm32/usart.h>
 #include <libopencm3/usb/usbd.h>
-#include <libopencm3/stm32/f1/adc.h>
+#include <libopencm3/stm32/adc.h>
 
 uint32_t led_error_port;
 uint16_t led_error_pin;
@@ -54,8 +54,7 @@ void platform_init(void)
 	void initialise_monitor_handles(void);
 	initialise_monitor_handles();
 #endif
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
-
 	rev =  detect_rev();
 	/* Enable peripherals */
 	rcc_periph_clock_enable(RCC_AFIO);

src/platforms/swlink/usbdfu.c

@@ -77,7 +77,7 @@ int main(void)
 
 	dfu_protect(false);
 
-	rcc_clock_setup_in_hse_8mhz_out_72mhz();
+	rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
 	systick_set_clocksource(STK_CSR_CLKSOURCE_AHB_DIV8);
 	systick_set_reload(900000);