[STM32F3] Split timer common f24 into f234 and f24.

lib/stm32/common/timer_common_f234.c

@@ -0,0 +1,58 @@
+/** @addtogroup timer_file
+
+*/
+
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2010 Edward Cheeseman <evbuilder@users.sourceforge.org>
+ * Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**@{*/
+
+#include <libopencm3/stm32/timer.h>
+
+/*---------------------------------------------------------------------------*/
+/** @brief Set Input Polarity
+
+The timer channel must be set to input capture mode.
+
+@param[in] timer_peripheral Unsigned int32. Timer register address base
+@param[in] ic ::tim_ic_id. Input Capture channel designator.
+@param[in] pol ::tim_ic_pol. Input Capture polarity control.
+*/
+
+void timer_ic_set_polarity(uint32_t timer_peripheral, enum tim_ic_id ic,
+			   enum tim_ic_pol pol)
+{
+	/* Clear CCxP and CCxNP to zero. For both edge trigger both fields are
+	 * set. Case 10 is invalid.
+	 */
+	TIM_CCER(timer_peripheral) &= ~(0x6 << (ic * 4));
+	switch (pol) {
+	case TIM_IC_RISING:  /* 00 */
+		break;
+	case TIM_IC_BOTH:    /* 11 */
+		TIM_CCER(timer_peripheral) |= (0x6 << (ic * 4));
+		break;
+	case TIM_IC_FALLING: /* 01 */
+		TIM_CCER(timer_peripheral) |= (0x2 << (ic * 4));
+	}
+}
+/**@}*/
+
+

lib/stm32/common/timer_common_f24.c

@@ -37,7 +37,6 @@ and similarly for TIM5 for oscillator calibration purposes.
 @ref tim5_opt_trigger_remap.
 */
 
-#if !defined(STM32F3)
 void timer_set_option(uint32_t timer_peripheral, uint32_t option)
 {
 	if (timer_peripheral == TIM2) {
@@ -48,35 +47,7 @@ void timer_set_option(uint32_t timer_peripheral, uint32_t option)
 		TIM_OR(timer_peripheral) |= option;
 	}
 }
-#endif
 
-/*---------------------------------------------------------------------------*/
-/** @brief Set Input Polarity
-
-The timer channel must be set to input capture mode.
-
-@param[in] timer_peripheral Unsigned int32. Timer register address base
-@param[in] ic ::tim_ic_id. Input Capture channel designator.
-@param[in] pol ::tim_ic_pol. Input Capture polarity control.
-*/
-
-void timer_ic_set_polarity(uint32_t timer_peripheral, enum tim_ic_id ic,
-			   enum tim_ic_pol pol)
-{
-	/* Clear CCxP and CCxNP to zero. For both edge trigger both fields are
-	 * set. Case 10 is invalid.
-	 */
-	TIM_CCER(timer_peripheral) &= ~(0x6 << (ic * 4));
-	switch (pol) {
-	case TIM_IC_RISING:  /* 00 */
-		break;
-	case TIM_IC_BOTH:    /* 11 */
-		TIM_CCER(timer_peripheral) |= (0x6 << (ic * 4));
-		break;
-	case TIM_IC_FALLING: /* 01 */
-		TIM_CCER(timer_peripheral) |= (0x2 << (ic * 4));
-	}
-}
 /**@}*/
 
 

lib/stm32/f2/Makefile

@@ -38,9 +38,10 @@ OBJS		= gpio.o exti.o rcc.o
 OBJS            += crc_common_all.o dac_common_all.o dma_common_f24.o \
                    gpio_common_all.o gpio_common_f234.o i2c_common_all.o \
                    iwdg_common_all.o rtc_common_bcd.o spi_common_all.o \
-                   spi_common_f124.o timer_common_all.o timer_common_f24.o \
-                   usart_common_all.o usart_common_f124.o flash_common_f234.o \
-                   flash_common_f24.o hash_common_f24.o crypto_common_f24.o
+                   spi_common_f124.o timer_common_all.o timer_common_f234.o \
+		   timer_common_f24.o usart_common_all.o usart_common_f124.o \
+		   flash_common_f234.o flash_common_f24.o hash_common_f24.o \
+		   crypto_common_f24.o
 
 VPATH += ../../usb:../:../../cm3:../common
 

lib/stm32/f3/Makefile

@@ -39,7 +39,7 @@ OBJS		= rcc.o gpio.o adc.o exti.o i2c.o spi.o usart.o
 OBJS            += gpio_common_all.o gpio_common_f234.o \
 		   dac_common_all.o usart_common_all.o crc_common_all.o\
 		   iwdg_common_all.o spi_common_all.o dma_common_f13.o\
-		   timer_common_all.o timer_common_f24.o flash_common_f234.o \
+		   timer_common_all.o timer_common_f234.o flash_common_f234.o \
 		   flash.o
 
 OBJS		+= usb.o usb_control.o usb_standard.o usb_f103.o

lib/stm32/f4/Makefile

@@ -40,9 +40,9 @@ OBJS            += crc_common_all.o dac_common_all.o dma_common_f24.o \
                    gpio_common_all.o gpio_common_f234.o i2c_common_all.o \
                    iwdg_common_all.o pwr_common_all.o rtc_common_bcd.o \
                    spi_common_all.o spi_common_f124.o timer_common_all.o \
-                   timer_common_f24.o usart_common_all.o usart_common_f124.o \
-                   flash_common_f234.o flash_common_f24.o hash_common_f24.o \
-                   crypto_common_f24.o
+                   timer_common_f234.o timer_common_f24.o usart_common_all.o \
+		   usart_common_f124.o flash_common_f234.o flash_common_f24.o \
+		   hash_common_f24.o crypto_common_f24.o
 
 OBJS            += usb.o usb_standard.o usb_control.o usb_fx07_common.o \
 		   usb_f107.o usb_f207.o