stm32: usart-v2: pull up remaining f3/f0 defns

Final chunk of register definitions to be pulled up.

Now the "target" files are _only_ defining the list of u(s)arts
available, and any _specific_ functions for that target.

include/libopencm3/stm32/common/usart_common_v2.h

@@ -231,9 +231,15 @@
 /** RTOIE: Receiver timeout interrupt enable */
 #define USART_CR1_RTOIE			(1 << 26)
 
-/* DEAT[4:0]: Driver Enable assertion time */
+#define USART_CR1_DEAT_SHIFT		21
+#define USART_CR1_DEAT			(0x1F << USART_CR1_DEAT_SHIFT)
+/** DEAT[4:0]: Driver Enable assertion time */
+#define USART_CR1_DEAT_VAL(x)		((x) << USART_CR1_DEAT_SHIFT)
 
-/* DEDT[4:0]: Driver Enable deassertion time */
+#define USART_CR1_DEDT_SHIFT		16
+#define USART_CR1_DEDT			(0x1F << USART_CR1_DEDT_SHIFT)
+/** DEDT[4:0]: Driver Enable deassertion time */
+#define USART_CR1_DEDT_VAL(x)		((x) << USART_CR1_DEDT_SHIFT)
 
 /** OVER8: Oversampling mode */
 #define USART_CR1_OVER8			(1 << 15)
@@ -368,6 +374,12 @@
 #define USART_CR3_WUS_START_BIT		(0x2 << 20)
 #define USART_CR3_WUS_RXNE		(0x3 << 20)
 
+#define USART_CR3_SCARCNT_SHIFT		17
+#define USART_CR3_SCARCNT_MASK		0x7
+/** SCARCNT[2:0]: Smartcard auto retry count */
+#define USART_CR3_SCARCNT_DISABLE	(0 << USART_CR3_SCARCNT_SHIFT)
+#define USART_CR3_SCARCNT_VAL(x)	((x) << USART_CR3_SCARCNT_SHIFT)
+
 /** DEP: Driver enable polarity selection */
 #define USART_CR3_DEP			(1 << 15)
 
@@ -418,6 +430,19 @@
 
 /**@}*/
 
+/** @defgroup usart_gtpr_values USART_GTPR Values
+ * @ingroup usart_defines
+ * @{
+ */
+#define USART_GTPR_GT_SHIFT		8
+#define USART_GTPR_GT			(0xFF << USART_GTPR_GT_SHIFT)
+#define USART_GTPR_GT_VAL(x)		((x) << USART_GTPR_GT_SHIFT)
+
+#define USART_GTPR_PSC_SHIFT		0
+#define USART_GTPR_PSC			(0xFF << USART_GTPR_PSC_SHIFT)
+#define USART_GTPR_PSC_VAL(x)		((x) << USART_GTPR_PSC_SHIFT)
+/**@}*/
+
 /* ------------------------------------------------------ */
 /** @defgroup usart_rtor_values USART_RTOR Values
  * @ingroup usart_defines

include/libopencm3/stm32/f0/usart.h

@@ -47,33 +47,6 @@
 /* Register values                                                           */
 /*****************************************************************************/
 
-/* USART_CR1 Values ---------------------------------------------------------*/
-
-#define USART_CR1_DEAT_SHIFT		21
-#define USART_CR1_DEAT			(0x1F << USART_CR1_DEAT_SHIFT)
-#define USART_CR1_DEAT_VAL(x)		((x) << USART_CR1_DEAT_SHIFT)
-
-#define USART_CR1_DEDT_SHIFT		16
-#define USART_CR1_DEDT			(0x1F << USART_CR1_DEDT_SHIFT)
-#define USART_CR1_DEDT_VAL(x)		((x) << USART_CR1_DEDT_SHIFT)
-
-/* USART_CR3 Values ---------------------------------------------------------*/
-
-#define USART_CR3_SCARCNT_SHIFT		17
-#define USART_CR3_SCARCNT		(7 << USART_CR3_SCARCNT_SHIFT)
-#define USART_CR3_SCARCNT_DISABLE	(0 << USART_CR3_SCARCNT_SHIFT)
-#define USART_CR3_SCARCNT_VAL(x)	((x) << USART_CR3_SCARCNT_SHIFT)
-
-/* USART_GTPR Values --------------------------------------------------------*/
-
-#define USART_GTPR_GT_SHIFT		8
-#define USART_GTPR_GT			(0xFF << USART_GTPR_GT_SHIFT)
-#define USART_GTPR_GT_VAL(x)		((x) << USART_GTPR_GT_SHIFT)
-
-#define USART_GTPR_PSC_SHIFT		0
-#define USART_GTPR_PSC			(0xFF << USART_GTPR_PSC_SHIFT)
-#define USART_GTPR_PSC_VAL(x)		((x) << USART_GTPR_PSC_SHIFT)
-
 /*****************************************************************************/
 /* API Functions                                                             */
 /*****************************************************************************/

include/libopencm3/stm32/f3/usart.h

@@ -47,34 +47,9 @@
 #define UART5				UART5_BASE
 /**@}*/
 
+BEGIN_DECLS
 
-/* --- USART_CR3 values ---------------------------------------------------- */
-
-
-/* SCARCNT[2:0]: Smartcard auto-retry count */
-#define USART_CR3_SCARCNT_OFF		(0x0 << 17)
-/* 0x1 to 0x7: number of automatic retransmission attempts */
-
-
-/* --- USART_BRR values ---------------------------------------------------- */
-
-/* DIV_Mantissa[11:0]: mantissa of USARTDIV */
-#define USART_BRR_DIV_MANTISSA_MASK     (0xFFF << 4)
-/* DIV_Fraction[3:0]: fraction of USARTDIV */
-#define USART_BRR_DIV_FRACTION_MASK     0xF
-
-/* --- USART_GTPR values --------------------------------------------------- */
-
-/* GT[7:0]: Guard time value */
-/* Note: N/A on UART4 & UART5 */
-#define USART_GTPR_GT_MASK              (0xFF << 8)
-
-/* PSC[7:0]: Prescaler value */
-/* Note: N/A on UART4/5 */
-#define USART_GTPR_PSC_MASK             0xFF
-
-
-
+END_DECLS
 
 #endif