Comments were not consistent, and this serves no purpose. There's no
reason to explicitly lock the flash first before unlocking. These bits
are simply set when the keys are written.
All the "f" type flash parts have an EOP flag, even if it's in different
bit positions. Add a header for this common functionality, and move
it's implementation to the existing common file.
Turns out, there's lots of common code for flash. Pull up prefetch
on/off to start with, as there's only a single bit name different.
Pull up the definitions of common API functions too, starting with
flash_set_ws. Even if the implementations are different, things that
meant to be the same, should be defined centrally.
The sector list is numerically contiguous, but the bits to write are not
contiguous. Good job ST.
Fixes: https://github.com/libopencm3/libopencm3/pull/934
Don't see any reason to make public definitions of these sorts of magic
numbers, they're completely internal to sector addressing.
- Change .power_save to .voltage_scale, a pwr_vos_scale enum
- Enable pwr clock before setting VOS scale
- Fix flash wait states
- Make flash_set_ws more robust
According to: https://gcc.gnu.org/onlinedocs/gcc-6.2.0/gcc/ARM-Function-Attributes.html
"Only basic asm statements can safely be included in naked functions (see Basic
Asm). While using extended asm or a mixture of basic asm and C code may appear
to work, they cannot be depended upon to work reliably and are not supported."
We didn't actually mark it deprecated very well, but it was
non-functional, and simply a poorly implemented wrapper for
rcc_periph_reset_pulse() anyway.
It's now been obsoleted in the examples for more than a year, and it's
time to kill it outright.
Fixes: https://github.com/libopencm3/libopencm3/issues/709
Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
On some targets these weren't even being referenced, on others they
were, in all cases they were empty and contributed no value.
They _actually_ served to declare groupings for doxygen, but we can do
that in a different manner, without having to have dummy files around.
Deprecate the old routine and make a new one that actually handles HSI
and HSE properly, and includes the predivider and the usb divider
settings as well.
STM32L0 uses the same DMA peripheral as STM32F0, F1, L1 and others
with some differences. Those are mostly in the number of supported
controllers and channels.
This patch enables the basic support with no attempt to only expose
the available controllers / channels.
For more information see the ST Application Note AN2548.
Signed-off-by: Martin Sivak <mars@montik.net>
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
Instead of every "simple" target having their own duplicate file with
all the section mappings, just provide a single, simple,
"cortex-m-generic.ld" that works with our startup code and any simple
rom/ram system. This also drops the pointless copying of files all over
the place. Using -L flags properly is sufficient, and the standard file
is now in the root of the library already.
Somewhat replaces some earlier work done by hg/lg, but much more
complete, so we kept it as is, because it's bringing in even more parts
after this.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
The original submitter of this squished everything into one series, and
has not returned. The code mostly appears good, and review comments were
followed for the most part. The project doesn't really maintain any
testing or board farm for sam3/sam4 parts, so we're going to just trust
our users.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
sam/4l: IRQ Configuration file (irq.json)
sam/4l: Basic Memory Map.
sam/4l: GPIO Defines.
sam/4l: GPIO Functions
Added everything that needed to compile the library: Makefile, Linker
Script and common includes.
sam/4l: SCIF function to start OSC.
sam/4l: GPIO Enable/Disable and Multiplexing configuration functions.
sam/4l: PLL Clock configuration.
sam/4l: Peripheral clock configuration and basic USART support.
sam: USART Character length configuration.
sam/4l: Generic Clock configuration functions.
sam/4l: Analog to Digital Converter Interface (ADCIFE) basic support.
Originally sourced from: https://github.com/libopencm3/libopencm3/pull/382
fixed some typos from the manual and poor merging/rebaseing,
and one judgment call on using a specific name for a conflicting
bit definition.
Karl Palsson
Jordi Pakey-Rodriguez
keepkeyjon
Matt Anderson
Matthew Lai
Martin Sivak
Guillaume Revaillot
Karl Palsson
kbob
Maxim Sloyko
Frantisek Burian
Sebastian Holzapfel