- rcc_get_i2c_clk_freq: Add support by taking RCC_CCIPR2 into account for I2C4.
- rcc_get_timer_clk_freq: Add support for LP timers
- rcc_get_usart_clk_freq: Fix APB freq used for LPUART1 and UART1, respectively.
This commit adds support for NRF52 TWI Master mode and slightly extends
existing I2C API. This is a breaking change, while mode selection needs to be
done during enabling I2C. There is one additional breaking change done because:
1) Unicore MX API design was PITA for writes
2) It is incompatible with EasyDMA
I strongly apologize to all two users who might be affected by this change.
* added: Linker script adds support for RAM4 and RAM5 memory regions, so
that those are usable by code. This also fixes the fact that RAM4 was
declared, but inaccessible previously
* changed: RAM1 is renamed to RAM2, shifting numbering of all regions.
This is done in order to be in line with other STM32 definitions,
similarly ROM1 became ROM2.
by making it vaguer. These days, there's extra timers that support the
BDTR register, so the simple "advanced" timer description is no longer
sufficiently clear. You have to check your particular reference manual.
Fixes: https://github.com/libopencm3/libopencm3/issues/1378
Presumably copy/paste error in original submission.
Verified in RM0440rev1 and rev5.
Fixes: c26eab251
Reported-by: qyx on the internet
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
* merged: nrf tree from unicore-mx
* fixed: small changes to make merged code play with rest of locm3 again
* added: linker script generator defines for nRF51/52 stubs
* added: doxygen support
This removes code and changes names and styles where relevant to be more
inline with normal libopencm3.
NRF52x library is built for hardfloat, M4F by default. The M4 no float
variants are less common, and if needed, the library can be built
manually for those variants. Unless some very common boards show up
using those parts, we don't need an extra library build.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Tested-by: Karl Palsson <karlp@tweak.net.au>
F411 parts, found on "black pill" boards support 100MHz operation,
but only 96MHz with USB. Provide default clock structures for this
common max speed.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Fix the bug that the iwdg counter is not refreshed after the configurationis complete, if this counter is not refreshed after the configuration is completed, the first iwdg counting period will be as long as 26 seconds.
Fixes: https://github.com/libopencm3/libopencm3/pull/1333
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Oskar
Vlad Logyin
Stefan Tauner
Karl Palsson
Stéphane Chevigny
me@me.net
Karl Palsson
Eduard Drusa
Parth Panchal
Marek Koza
Keenan Tims
Evgenii Iarkov
mikisama
Will Gallia
Voronov Alexander
Dima Barsky
Chris Chronopoulos
Luna Gräfje
Tim Børresen
Bastian de Byl
Mikael Lövqvist
weycen76