Don't include any of the common files yet, we're only getting a stub framework
up for further work.
This is mostly noise adding links from the other families to make the l4
"exist"
Most changes are noise from doxygen.
Readme udpated to explain newer FP_FLAGS for m7
stm32f7 library is skipped if the toolchain doesn't support it yet.
Extension of code for STM32F1 to allow for dual bank series XL.
Small changes to documentation for F2, F4 and L1 to add a parameter reference.
Tested with STM32F103RBT6
(note: tests show that the PG bit must be cleared after programming, otherwise
a subsequent erase attempt fails. This has been added to flash_program_half_word
for F0 and F1 only. A fix for the other families is not included in this PR.)
So that the navigation pane works correctly in browsers.
Some additional doc fixes put in where found (but many more still to go).
Added some dummy .c and .h files to bring the associated docs into line.
makefile changed to allow 'make html' as well as 'make doc' (the latter only does html anyway).
F2 and F4 have a common section to deal with the options register (TIM2 and TIM5 only)
L1 has been made common with timer_common_all as its options register has very different settings to F2/F4. Code is in the L1/timer.c L1/timer.h files
Note that F3 and F05 timers should fit into this scheme, with F3 having additional features.
Bundled with this is L1/pwr.h to change a documentation setting
Also all the Doxyfiles have added "ENABLE_PREPROCESSING = NO" to fix a problem introduced by commit 118.
to remove errors, duplications and inconsistencies.
File lib/stm32/f1/pwr.c - all code removed as it duplicates that in common/pwr_common.c
Remaining changes do not affect code. Compiles OK.
TODO efm32 has no code so generates no modules
TODO F2 needs pwr.c
TODO L1 needs dma.h and dma.c
Updated the documentation so that it appears in all families
Also added it to the L1 area, but is untested. An addition to the memorymap
allows commonality and a #ifdef added to the spi_common_all code to
exclude the case of SPI3 for L1 and F0 as SPI3 doesn't exist in those.
An rcc dispatch header was added to remove same code from the spi header.
In the header:
- Fix DMA_SxCR_CT: change shift from 18 to 19
For use with the convenience functions:
- Added DMA_SxCR_CHSEL generic values
- Added DMA_STREAM - generic values
- Added dma_if_offset - rather than separating out LISR and HISR
- Added masks
- Added dma_disable_double_buffer_mode()
There was no reference to LM4F in in the doc/ subdirectory. Add the needed
infrastructure to generate focumentation for LM4F.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
New doc directory with config files and generated html, LaTeX/pdf.
Makefile provided for autogeneration and explanatory README.
The project structure is hostile to doxygen, which can't cope with functions
of the same name. Doxygen is run for each family separately, and separately
for LaTeX generation. Customized layout files sort of "integrate" HTML, and
separate pdfs are generated for each family. Not ideal but seems the best
solution until doxygen changes, if at all.
Karl Palsson
Frantisek Burian
Stefan Agner
Felix Held
Ken Sarkies
Ken Sarkies
Alexandru Gagniuc
Ken Sarkies