Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
Instead of every "simple" target having their own duplicate file with
all the section mappings, just provide a single, simple,
"cortex-m-generic.ld" that works with our startup code and any simple
rom/ram system. This also drops the pointless copying of files all over
the place. Using -L flags properly is sufficient, and the standard file
is now in the root of the library already.
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
According to reference manuals both l0 and l4 have "v2" i2c peripheral.
This patch adds i2c support to l0 and l4 using previously unified "v2" i2c
headers and implementation.
No real hardware has been tested so far. Only compilation tests for both
libopencm3 and libopencm3-examples for all stm32 families.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Helpful if you don't like seeing:
(gdb) vecstate
HardFault: forced due to escalated or disabled configurable fault (see below)
UsageFault due to access to disabled/absent coprocessor
L4 and F3 actually have the same bits to write in the same order, but F3 hides
the name of the deep power down bit. Keep the like that for now, but there's a
standard API for enabling and disabling the regulator.
Just the basic core common functionality gained for free by being a common
peripheral. Enough for a miniblink.
Fixes some errors in the GPIO memory map. ST's naming of AHB2 vs AHB3 is
confusing.
Values from RM0351rev1, with the correction of the duplicate TIM1_CC entry.
Only stub support so far, but this opens up the beginning of build testing.
Karl Palsson
Karl Palsson
Guillaume Revaillot
Bruno Randolf
Sergey Matyukevich
benjaminlevine