GD32F1X0 (X can be 3, 5, 7 and 9) is a series of Cortex-M3 MCUs by
GigaDevice, which features pin-to-pin package compatibility with
STM32F030 MCU line. F150 adds USB support to F130, and F170/F190 adds
CAN support.
Currently the code mainly targets GD32F130 and F150 chips. Some register
are different between F130/150 and F170/190, just like the difference
between STM32F1 Performance line and Connectivity line.
From the perspective of registers and memory map, GD32F1X0 seems like a
mixture between STM32F1 and STM32F0 (because it is designed to be
pin-to-pin compatible with F0, but with Cortex-M3 like F1). A bunch of
code are shared between STM32 and GD32, and these code are specially
processed to include the GD32 headers instead of STM32 headers when meet
GD32F1X0.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
gd32/rcc.[ch] are forks of stm32f1/rcc
gd32/flash.[ch] are forks of stm32f0/flash
No attempts at deduplicating this have been done at this stage. We can
see where they move in the future.
The original submitter of this squished everything into one series, and
has not returned. The code mostly appears good, and review comments were
followed for the most part. The project doesn't really maintain any
testing or board farm for sam3/sam4 parts, so we're going to just trust
our users.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
sam/4l: IRQ Configuration file (irq.json)
sam/4l: Basic Memory Map.
sam/4l: GPIO Defines.
sam/4l: GPIO Functions
Added everything that needed to compile the library: Makefile, Linker
Script and common includes.
sam/4l: SCIF function to start OSC.
sam/4l: GPIO Enable/Disable and Multiplexing configuration functions.
sam/4l: PLL Clock configuration.
sam/4l: Peripheral clock configuration and basic USART support.
sam: USART Character length configuration.
sam/4l: Generic Clock configuration functions.
sam/4l: Analog to Digital Converter Interface (ADCIFE) basic support.
Instead of expecting a posix-ish "find" in the shell, simply leverage
our knowledge of our source structure to make a single list using make's
builtin wildcard() functionality.
Fixes https://github.com/libopencm3/libopencm3/issues/828
Sometimes you're working on a subset of targets, and want to do full
clean/builds, but don't need to clean and rebuild families you're not
working with. This is a pure syntactic change that makes it easier to
simply comment out lines for targets, instead of having to mangle line
continuations.
Thoughts: should this be a "sam0" family rather than samd? (Much like Atmel's
own software package lumps all the cortex-m0+ devices in one family)
This was enough to get a basic blinky working at least.
This has hurt many many many people over it's lifetime, by confusing their
multilib toolchains. Simply drop it outright. People who _really_ know what
they're doing are still perfectly entitled to "install" portions of this
project in suitable locations for their own use.
Values from RM0351rev1, with the correction of the duplicate TIM1_CC entry.
Only stub support so far, but this opens up the beginning of build testing.
Most changes are noise from doxygen.
Readme udpated to explain newer FP_FLAGS for m7
stm32f7 library is skipped if the toolchain doesn't support it yet.
Freescale Vybrid is a familiy of ARM SoC, wheras the VF6xx models
have two cores in one SoC, a Cortex-A5 and a Cortex-M4. This adds
initial support for the Cortex-M4 in the libopencm3 library.
By using two different ram areas (pc_ram and ps_ram) the user can
put the code in a RAM area bounded to the code bus. The data can
be stored in the data area. However, currently the initial values
of for the variables in the data section are stored in the code
section and copied to the ram section by the initialization code
(like it's copied from ROM to RAM on microcontrollers).
When full path of a source directory has spaces in it, that makes
shell and Make split the path, so special treatment is
necessary. Additionally, @F doesn't honour the escaping, so has to be
avoided.
Reported-by: Roman Faizullin <roman@faizullin.info>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
So that the navigation pane works correctly in browsers.
Some additional doc fixes put in where found (but many more still to go).
Added some dummy .c and .h files to bring the associated docs into line.
makefile changed to allow 'make html' as well as 'make doc' (the latter only does html anyway).
This converts all the YAML files to JSON files, as json parsing is built
into python instead of being a separate library requiring installation.
YAML is a superset of JSON, but putting comments in is not quite as obvious
as it is in yaml.
The following glue was used to convert yaml to json:
python -c 'import sys, yaml, json; json.dump(yaml.load(sys.stdin), sys.stdout, indent=4)' < $1 > $2
Clearly I haven't tested this on every single platform, and this
doesn't address the large blobs of yaml in the lpc4300 scripts directory,
only the cortex NVIC generation process.
I've tested a few IRQ driven example apps, and I've checked the generated
output of some known cases like the LM3s that has explicit gaps, and they are
all generated correctly.
Each thread runs its own stylecheck script, outputing to {FILENAME}.stylecheck file. If that file is empty, it is deleted. Otherwise it is printed to the output and stays in the sources directory to indicate something in that file is not correct.
The file mangling and cat-ing is needed because of multithreaded nature of paralell make. (We like single file to be an block of text on the output).
New PHONY added that make styleclean clears all .stylecheck files.
New functionality added to check only single file (specifyilng the file with stylecheck extension) ie
make lib/usb/usb.c.stylecheck
BUG: if someone edit that file, .stylecheck file is not regenerated - missing dependency on the %.stylecheck rule. FIX: make styleclean stylecheck rebuild all style errors
Performance:
make stylecheck 1:43 -> 1:54 (slightly slower due to file creation)
make stylecheck -j8 1:43 -> 0:34 (Rapidly faster)
note the -j option must be specified with number, OS Windows cannot handle one thread per file.
make clean 34.64s -> 35.35s
make clean -j 14.00s -> 14.16s
(measured on Core2 quad, 2.84GHz, 4GB ram, windows x86)
Added overhead is logging the operation with every yamlfile to output.
- Makefiles now include building f3 src directory.
- Gpio support added. gpio_common_f24 changed to support also f3.
- f3 still not compiling, but f2 compile not broken (probably also f4).
We now have a subdirectory containing register definitions in scripts,
this confuses the install command so we have to be more specific about
which scripts to install. We actually only want to install the black
magic scripts from there as they are useful for locm3 users.
Added --terse and --mailback options to the make stylecheck target. It
also does continue even if it enounters a possible error.
We decided on two exceptions from the linux kernel coding standard:
- Empty wait while loops may end with ; on the same line.
- All blocks after while, if, for have to be in brackets even if they
only contain one statement. Otherwise it is easy to introduce an
error.
Checkpatch needs to be adapted to reflect those changes.
To make it easier on everyone to keep a uniform coding style throughout
the project we will be using this target to verify our code for
complience.
Currently a lot of files in the project don't fully follow the coding
style. We need to reach that spot over time though. :)
Use fixed variables for things that can't change, instead of variables
like SRCLIBDIR that was causing a shell call for every single use.
Use less functions in general and less shell expansions.
Use builtin functions like $(realpath blah) instead of $(shell
pwd)/blah In particular, this was important for me trying to build on
windows with git-shell. This should help a lot on smaller build
machines, but doesn't make a huge difference on my own.
Remove redundant clean print messages. These also cause more needless
shell expansions.
Create lm4f code infrastructure from the lm3s infrastructure.
As far as the interrupt table is concerned, don't create an irq.yaml. Just
include the LM3S nvic.h. The LM3S vector table seems to be compatible with the
LM4F
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Guillaume Revaillot
Icenowy Zheng
Dmitry Rezvanov
Karl Palsson
kbob
Maxim Sloyko
Julian Friedrich
Sebastian Holzapfel
Karl Palsson
Kuldeep Singh Dhaka
Frantisek Burian
Stefan Agner
Paul Fertser
Felix Held
Ken Sarkies
Federico Ruiz Ugalde
Piotr Esden-Tempski
Ben Gamari
TitanMKD
Michael Ossmann
Karl Palsson
Gareth McMullin
Gareth McMullin
Alexandru Gagniuc
Ken Sarkies