previously, only stm32 chips passed the information about which chip to
build on into the compiler. this information is essential to dispatch,
thus defining LPC13XX, LPC17XX, LPC43XX and LM3S in analogy to
STM32F1..4.
the only change this results in in the example binaries is in the
hackrf-jellybean/systick example, where the the check in
systick_set_clocksource for overflowing from the stm32 area gets used.
these register definitions are common to all cortex mcus. some of the
registers might not be implemented everywhere (especially the floating
point registers), but defining them does no harm.
this modification does not result in any changes in the example
binaries.
* simple polling of an injected channel
* timer triggered sampling of an injected channel
* timer triggered sampling and IRQ handling of an injected channel
* timer triggered sampling and IRQ handling of 4 injected channels
remove rcc_set_adc_clk - use rcc version
Added functions:
- adc_power_on
- adc_start_conversion_direct
- adc_set_dual_mode
- adc_eoc
- adc_eoc_injected
- adc_read_regular
- adc_read_injected
- adc_set_injected_offset
Tested dual mode scanned regular, but no tests of injected yet.
Changes: "discontinuous" was misspelled.
- adc_set_discontinuous_mode_regular - added "length" parameter
- adc_disable_discontinuous_mode_regular - name change
- adc_enable_discontinuous_mode_injected - name change
- adc_enable_automatic_injected_group_conversion - disable triggers
- adc_enable_jeoc_interrupt - name change to match common usage in lib
- adc_disable_jeoc_interrupt - ditto
- adc_enable_external_trigger_regular - remove incorrect test on parameter
- adc_enable_external_trigger_injected - ditto
- adc_set_sample_time - name change to match function's purpose
- adc_set_conversion_time_on_all_channels - ditto
- adc_set_injected_sequence - changed order of register loading (ref Barlow's issue)
- adc_enable_analog_watchdog_on_all_channels - flipped AWDSGL
- adc_enable_analog_watchdog_on_selected_channel - ditto
added aliases for expected commonly used functions to avoid sudden user code breakage
In adc.h, corrected errors in SQR names
added "deprecated" compiler warnings to adc_on and to aliases defined in adc.c
If an example is in the libopencm3 source directory it will use the
locally built library instead of the system library.
When you copy an example out of the libopencm3 tree it will
automatically detect it and build using the system wide installation.
- The library files are now being built into the lib subdirectory of the
source.
- The linker files for each library are being copied into the lib source
subdirectory.
Motivation: The relative locations of files in the source directory after make
are now the same as after make install now. This makes it easier to
reuse examples with their makefiles outside of the libopencm3
sourcecode directory.
Added scu driver file scu.c.
Modified Makefile/Makefile.include to generate .map file and use -O2 as optimization.
Modified hackrf-jellybean miniblink.c to enable 1V8 and blink LED1,2&3 with configuration of PinMux and GPIO.
This is needed even in plain C when 64 bit variable (e.g. long long int)
arithmetic is used. For example it is required when newlib is compiled with
--enable-newlib-io-long-long.
Conflicts:
lib/stm32/f1/libopencm3_stm32f1.ld
lib/stm32/f2/libopencm3_stm32f2.ld
chrysn
Felix Ruess
Stephen Dwyer
Ken Sarkies
Daniel Serpell
Paul Sokolovsky
Jason Kotzin
Piotr Esden-Tempski
Oliver Dille
Thomas Waldecker
Karl Palsson
TitanMKD
Michael Ossmann
Tomaz Solc
Taylor Vesely