You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
139 lines
3.9 KiB
139 lines
3.9 KiB
##
|
|
## This file is part of the libopencm3 project.
|
|
##
|
|
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
## Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
|
|
## Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
##
|
|
## This library is free software: you can redistribute it and/or modify
|
|
## it undebipr the terms of the GNU Lesser General Public License as published by
|
|
## the Free Software Foundation, either version 3 of the License, or
|
|
## (at your option) any later version.
|
|
##
|
|
## This library is distributed in the hope that it will be useful,
|
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
## GNU Lesser General Public License for more details.
|
|
##
|
|
## You should have received a copy of the GNU Lesser General Public License
|
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
##
|
|
|
|
PREFIX ?= arm-none-eabi
|
|
CC = $(PREFIX)-gcc
|
|
LD = $(PREFIX)-gcc
|
|
OBJCOPY = $(PREFIX)-objcopy
|
|
OBJDUMP = $(PREFIX)-objdump
|
|
|
|
TOOLCHAIN_DIR ?= ../../../..
|
|
ifeq ($(wildcard ../../../../lib/libopencm3_lm4f.a),)
|
|
ifneq ($(strip $(shell which $(CC))),)
|
|
TOOLCHAIN_DIR := $(shell dirname `which $(CC)`)/../$(PREFIX)
|
|
endif
|
|
else
|
|
ifeq ($(V),1)
|
|
$(info We seem to be building the example in the source directory. Using local library!)
|
|
endif
|
|
endif
|
|
|
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
|
CFLAGS += -O0 -g3 -Wall -Wextra -I$(TOOLCHAIN_DIR)/include \
|
|
-fno-common $(ARCH_FLAGS) -MD -DLM4F
|
|
LDSCRIPT ?= $(BINARY).ld
|
|
LDFLAGS += --static -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group \
|
|
-L$(TOOLCHAIN_DIR)/lib \
|
|
-T$(LDSCRIPT) -nostartfiles -Wl,--gc-sections \
|
|
$(ARCH_FLAGS)
|
|
|
|
OBJS += $(BINARY).o
|
|
|
|
# Support for ICDI is not in any openocd release as of yet
|
|
# A patch to add support for ICDI is under review
|
|
OOCD ?= openocd
|
|
OOCD_INTERFACE ?= ti-icdi
|
|
# No official board.cfg for the stellaris launchpad
|
|
OOCD_BOARD ?= stellaris_launchpad
|
|
|
|
# Be silent per default, but 'make V=1' will show all compiler calls.
|
|
ifneq ($(V),1)
|
|
Q := @
|
|
NULL := 2>/dev/null
|
|
else
|
|
LDFLAGS += -Wl,--print-gc-sections
|
|
endif
|
|
|
|
.SUFFIXES: .elf .bin .hex .srec .list .images
|
|
.SECONDEXPANSION:
|
|
.SECONDARY:
|
|
|
|
all: images
|
|
|
|
images: $(BINARY).images
|
|
flash: $(BINARY).flash
|
|
|
|
%.images: %.bin %.hex %.srec %.list
|
|
@#echo "*** $* images generated ***"
|
|
|
|
%.bin: %.elf
|
|
@#printf " OBJCOPY $(*).bin\n"
|
|
$(Q)$(OBJCOPY) -Obinary $(*).elf $(*).bin
|
|
|
|
%.hex: %.elf
|
|
@#printf " OBJCOPY $(*).hex\n"
|
|
$(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex
|
|
|
|
%.srec: %.elf
|
|
@#printf " OBJCOPY $(*).srec\n"
|
|
$(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec
|
|
|
|
%.list: %.elf
|
|
@#printf " OBJDUMP $(*).list\n"
|
|
$(Q)$(OBJDUMP) -S $(*).elf > $(*).list
|
|
|
|
%.elf: $(OBJS) $(LDSCRIPT) $(TOOLCHAIN_DIR)/lib/libopencm3_lm4f.a
|
|
@#printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
|
$(Q)$(LD) -o $(*).elf $(OBJS) -lopencm3_lm4f $(LDFLAGS)
|
|
|
|
%.o: %.c Makefile
|
|
@#printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
|
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
|
|
|
clean:
|
|
$(Q)rm -f *.o
|
|
$(Q)rm -f *.d
|
|
$(Q)rm -f *.elf
|
|
$(Q)rm -f *.bin
|
|
$(Q)rm -f *.hex
|
|
$(Q)rm -f *.srec
|
|
$(Q)rm -f *.list
|
|
|
|
# FIXME: Replace STM32 stuff with proper Stellaris support.
|
|
ifeq ($(OOCD_SERIAL),)
|
|
%.flash: %.hex
|
|
@printf " FLASH $<\n"
|
|
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
-f board/$(OOCD_BOARD).cfg \
|
|
-c "init" -c "reset init" \
|
|
-c "stm32x mass_erase 0" \
|
|
-c "flash write_image $(*).hex" \
|
|
-c "reset" \
|
|
-c "shutdown" $(NULL)
|
|
else
|
|
%.flash: %.hex
|
|
@printf " FLASH $<\n"
|
|
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
|
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
|
|
-f board/$(OOCD_BOARD).cfg \
|
|
-c "ft2232_serial $(OOCD_SERIAL)" \
|
|
-c "init" -c "reset init" \
|
|
-c "stm32x mass_erase 0" \
|
|
-c "flash write_image $(*).hex" \
|
|
-c "reset" \
|
|
-c "shutdown" $(NULL)
|
|
endif
|
|
|
|
.PHONY: images clean
|
|
|
|
-include $(OBJS:.o=.d)
|
|
|
|
|