You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
140 lines
4.0 KiB
140 lines
4.0 KiB
/** @addtogroup usb_file USB peripheral API
|
|
* @ingroup peripheral_apis
|
|
*
|
|
* @brief USB Peripheral for Happy Gecko
|
|
*
|
|
* The Happy Gecko uses the "standard" usb_dwc_otg core.
|
|
*
|
|
* @sa usb_defines
|
|
* @copyright See @ref lgpl_license
|
|
*/
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
|
|
* Copyright (C) 2018 Seb Holzapfel <schnommus@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <libopencm3/cm3/common.h>
|
|
#include <libopencm3/efm32/memorymap.h>
|
|
#include <libopencm3/efm32/cmu.h>
|
|
#include <libopencm3/efm32/usb.h>
|
|
#include <libopencm3/usb/usbd.h>
|
|
#include <libopencm3/usb/dwc/otg_fs.h>
|
|
#include "usb_private.h"
|
|
#include "usb_dwc_common.h"
|
|
|
|
/**@{*/
|
|
|
|
/* Receive FIFO size in 32-bit words. */
|
|
#define RX_FIFO_SIZE 256
|
|
|
|
/* FIXME: EFM32HG has 6 bidirectional endpoints.
|
|
* problem is "uint32_t doeptsiz[4];" in usb_private.h */
|
|
|
|
#define ENDPOINT_COUNT 4
|
|
|
|
static struct _usbd_device _usbd_dev;
|
|
|
|
/** Initialize the USB device controller hardware of the EFM32HG. */
|
|
static usbd_device *efm32hg_usbd_init(void)
|
|
{
|
|
/* Enable peripheral clocks required for USB */
|
|
cmu_periph_clock_enable(CMU_USB);
|
|
cmu_periph_clock_enable(CMU_USBC);
|
|
cmu_periph_clock_enable(CMU_LE);
|
|
|
|
/* Select LFRCO as LFCCLK clock */
|
|
CMU_LFCLKSEL = CMU_LFCLKSEL_LFC_LFRCO;
|
|
|
|
/* Enable the USBLE peripheral clock (sits on LFCCLK) */
|
|
cmu_periph_clock_enable(CMU_USBLE);
|
|
|
|
/* Calibrate USB based on communications */
|
|
CMU_USHFRCOCONF = CMU_USHFRCOCONF_BAND_48MHZ;
|
|
|
|
/* Enable USHFRCO Clock Recovery mode. */
|
|
CMU_USBCRCTRL |= CMU_USBCRCTRL_EN;
|
|
|
|
/* Select USHFRCO as clock source for USB */
|
|
cmu_osc_on(USHFRCO);
|
|
cmu_wait_for_osc_ready(USHFRCO);
|
|
|
|
/* Set up the USB clock source */
|
|
cmu_set_usbclk_source(USHFRCO);
|
|
cmu_wait_for_usbclk_selected(USHFRCO);
|
|
|
|
/* Turn off all Low Energy Mode (LEM) features. */
|
|
USB_CTRL = 0;
|
|
|
|
/* Initialize USB core */
|
|
USB_ROUTE = USB_ROUTE_PHYPEN; /* Enable PHY pins. */
|
|
|
|
/* Wait for AHB idle. */
|
|
while (!(OTG_FS_GRSTCTL & OTG_GRSTCTL_AHBIDL));
|
|
/* Do core soft reset. */
|
|
OTG_FS_GRSTCTL |= OTG_GRSTCTL_CSRST;
|
|
while (OTG_FS_GRSTCTL & OTG_GRSTCTL_CSRST);
|
|
|
|
/* Explicitly enable DP pullup (not all cores do this by default) */
|
|
OTG_FS_DCTL &= ~OTG_DCTL_SDIS;
|
|
|
|
/* Force peripheral only mode. */
|
|
OTG_FS_GUSBCFG |= OTG_GUSBCFG_FDMOD | OTG_GUSBCFG_TRDT_MASK;
|
|
|
|
OTG_FS_GINTSTS = OTG_GINTSTS_MMIS;
|
|
|
|
/* Full speed device. */
|
|
OTG_FS_DCFG |= OTG_DCFG_DSPD;
|
|
|
|
/* Restart the PHY clock. */
|
|
OTG_FS_PCGCCTL = 0;
|
|
|
|
OTG_FS_GRXFSIZ = efm32hg_usb_driver.rx_fifo_size;
|
|
_usbd_dev.fifo_mem_top = efm32hg_usb_driver.rx_fifo_size;
|
|
|
|
/* Unmask interrupts for TX and RX. */
|
|
OTG_FS_GAHBCFG |= OTG_GAHBCFG_GINT;
|
|
OTG_FS_GINTMSK = OTG_GINTMSK_ENUMDNEM |
|
|
OTG_GINTMSK_RXFLVLM |
|
|
OTG_GINTMSK_IEPINT |
|
|
OTG_GINTMSK_USBSUSPM |
|
|
OTG_GINTMSK_WUIM;
|
|
OTG_FS_DAINTMSK = 0xF;
|
|
OTG_FS_DIEPMSK = OTG_DIEPMSK_XFRCM;
|
|
|
|
return &_usbd_dev;
|
|
}
|
|
|
|
const struct _usbd_driver efm32hg_usb_driver = {
|
|
.init = efm32hg_usbd_init,
|
|
.set_address = dwc_set_address,
|
|
.ep_setup = dwc_ep_setup,
|
|
.ep_reset = dwc_endpoints_reset,
|
|
.ep_stall_set = dwc_ep_stall_set,
|
|
.ep_stall_get = dwc_ep_stall_get,
|
|
.ep_nak_set = dwc_ep_nak_set,
|
|
.ep_write_packet = dwc_ep_write_packet,
|
|
.ep_read_packet = dwc_ep_read_packet,
|
|
.poll = dwc_poll,
|
|
.disconnect = dwc_disconnect,
|
|
.base_address = USB_OTG_FS_BASE,
|
|
.set_address_before_status = 1,
|
|
.rx_fifo_size = RX_FIFO_SIZE,
|
|
};
|
|
|
|
/**@}*/
|