You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
62 lines
2.1 KiB
62 lines
2.1 KiB
/*
|
|
* This file is part of the libopenstm32 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopenstm32.h>
|
|
|
|
int main(void)
|
|
{
|
|
int i;
|
|
|
|
/* Enable GPIOC clock. */
|
|
RCC_APB2ENR = RCC_IOPCEN;
|
|
|
|
/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
|
|
/* Manually: */
|
|
// GPIOC_CRH = (GPIO_CNF_OUTPUT_PUSHPULL << (((12 - 8) * 4) + 2));
|
|
// GPIOC_CRH |= (GPIO_MODE_OUTPUT_2_MHZ << ((12 - 8) * 4));
|
|
/* Using API functions: */
|
|
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
|
|
GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
|
|
|
|
/* Blink the LED (PC12) on the board. */
|
|
while (1) {
|
|
/* Manually: */
|
|
// GPIOC_BSRR = GPIO12; /* LED off */
|
|
// for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
|
// GPIOC_BRR = GPIO12; /* LED on */
|
|
// for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
|
|
|
/* Using API functions gpio_set()/gpio_clear(): */
|
|
// gpio_set(GPIOC, GPIO12); /* LED off */
|
|
// for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
|
// gpio_clear(GPIOC, GPIO12); /* LED on */
|
|
// for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
|
|
|
/* Using API function gpio_toggle(): */
|
|
gpio_toggle(GPIOC, GPIO12); /* LED on/off */
|
|
for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 *vector_table[2] __attribute__ ((section(".vectors"))) = {
|
|
(u32 *)0x20000800, /* Use 2 KB stack (0x800 bytes). */
|
|
(u32 *)main, /* Use main() as reset vector for now. */
|
|
};
|
|
|