You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

436 lines
11 KiB

/** @addtogroup usb_file USB peripheral API
* @ingroup peripheral_apis
*
* @sa usb_defines
* @copyright See @ref lgpl_license
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
* Copyright (C) 2015 Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <string.h>
#include <libopencm3/cm3/common.h>
#include <libopencm3/efm32/memorymap.h>
#include <libopencm3/efm32/cmu.h>
#include <libopencm3/efm32/usb.h>
#include <libopencm3/usb/usbd.h>
#include "usb_private.h"
/**@{*/
/* Receive FIFO size in 32-bit words. */
#define RX_FIFO_SIZE 256
/* FIME: EFM32LG have 6 bidirectonal-endpoint
* problem is "uint32_t doeptsiz[4];" in usb_private.h
* doeptsiz is fixed size of length 4,
* if we it to be of length 6
* possibly, same with "uint8_t force_nak[4];"
*
* solution: remove everything driver specific from usb_private.h
* and move that to there specific driver files.
* maybe a pointer to driver specific data will do the task. */
#define ENDPOINT_COUNT 4
static struct _usbd_device _usbd_dev;
/** Initialize the USB_FS device controller hardware of the STM32. */
static usbd_device *efm32lg_usbd_init(void)
{
/* Enable clock */
CMU_HFCORECLKEN0 |= CMU_HFCORECLKEN0_USB | CMU_HFCORECLKEN0_USBC;
CMU_CMD = CMU_CMD_USBCCLKSEL_HFCLKNODIV;
/* wait till clock not selected */
while (!(CMU_STATUS & CMU_STATUS_USBCHFCLKSEL));
USB_GINTSTS = USB_GINTSTS_MMIS;
USB_CTRL &= ~USB_CTRL_DMPUAP;
USB_ROUTE = USB_ROUTE_DMPUPEN | USB_ROUTE_PHYPEN;
/* Wait for AHB idle. */
while (!(USB_GRSTCTL & USB_GRSTCTL_AHBIDL));
/* Do core soft reset. */
USB_GRSTCTL |= USB_GRSTCTL_CSRST;
while (USB_GRSTCTL & USB_GRSTCTL_CSRST);
/* Force peripheral only mode. */
USB_GUSBCFG |= USB_GUSBCFG_FDMOD | USB_GUSBCFG_TRDT_16BIT;
/* Full speed device. */
USB_DCFG |= USB_DCFG_DSPD;
/* Restart the PHY clock. */
USB_PCGCCTL = 0;
USB_GRXFSIZ = efm32lg_usb_driver.rx_fifo_size;
_usbd_dev.fifo_mem_top = efm32lg_usb_driver.rx_fifo_size;
/* Unmask interrupts for TX and RX. */
USB_GAHBCFG |= USB_GAHBCFG_GLBLINTRMSK;
USB_GINTMSK = USB_GINTMSK_ENUMDNEM |
USB_GINTMSK_RXFLVLM |
USB_GINTMSK_IEPINT |
USB_GINTMSK_USBSUSPM |
USB_GINTMSK_WUIM;
USB_DAINTMSK = 0xF;
USB_DIEPMSK = USB_DIEPMSK_XFRCM;
return &_usbd_dev;
}
static void efm32lg_set_address(usbd_device *usbd_dev, uint8_t addr)
{
(void)usbd_dev;
USB_DCFG = (USB_DCFG & ~USB_DCFG_DAD) | (addr << 4);
}
static void efm32lg_ep_setup(usbd_device *usbd_dev, uint8_t addr, uint8_t type,
uint16_t max_size,
void (*callback) (usbd_device *usbd_dev, uint8_t ep))
{
/*
* Configure endpoint address and type. Allocate FIFO memory for
* endpoint. Install callback function.
*/
uint8_t dir = addr & 0x80;
addr &= 0x7f;
if (addr == 0) { /* For the default control endpoint */
/* Configure IN part. */
if (max_size >= 64) {
USB_DIEP0CTL = USB_DIEP0CTL_MPSIZ_64;
} else if (max_size >= 32) {
USB_DIEP0CTL = USB_DIEP0CTL_MPSIZ_32;
} else if (max_size >= 16) {
USB_DIEP0CTL = USB_DIEP0CTL_MPSIZ_16;
} else {
USB_DIEP0CTL = USB_DIEP0CTL_MPSIZ_8;
}
USB_DIEP0TSIZ =
(max_size & USB_DIEP0TSIZ_XFRSIZ_MASK);
USB_DIEP0CTL |=
USB_DIEP0CTL_EPENA | USB_DIEP0CTL_SNAK;
/* Configure OUT part. */
usbd_dev->doeptsiz[0] = USB_DIEP0TSIZ_STUPCNT_1 |
USB_DIEP0TSIZ_PKTCNT |
(max_size & USB_DIEP0TSIZ_XFRSIZ_MASK);
USB_DOEPx_TSIZ(0) = usbd_dev->doeptsiz[0];
USB_DOEPx_CTL(0) |=
USB_DOEP0CTL_EPENA | USB_DIEP0CTL_SNAK;
USB_GNPTXFSIZ = ((max_size / 4) << 16) |
usbd_dev->driver->rx_fifo_size;
usbd_dev->fifo_mem_top += max_size / 4;
usbd_dev->fifo_mem_top_ep0 = usbd_dev->fifo_mem_top;
return;
}
if (dir) {
USB_DIEPTXF(addr) = ((max_size / 4) << 16) |
usbd_dev->fifo_mem_top;
usbd_dev->fifo_mem_top += max_size / 4;
USB_DIEPx_TSIZ(addr) =
(max_size & USB_DIEP0TSIZ_XFRSIZ_MASK);
USB_DIEPx_CTL(addr) |=
USB_DIEP0CTL_EPENA | USB_DIEP0CTL_SNAK | (type << 18)
| USB_DIEP0CTL_USBAEP | USB_DIEP0CTL_SD0PID
| (addr << 22) | max_size;
if (callback) {
usbd_dev->user_callback_ctr[addr][USB_TRANSACTION_IN] =
(void *)callback;
}
}
if (!dir) {
usbd_dev->doeptsiz[addr] = USB_DIEP0TSIZ_PKTCNT |
(max_size & USB_DIEP0TSIZ_XFRSIZ_MASK);
USB_DOEPx_TSIZ(addr) = usbd_dev->doeptsiz[addr];
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_EPENA |
USB_DOEP0CTL_USBAEP | USB_DIEP0CTL_CNAK |
USB_DOEP0CTL_SD0PID | (type << 18) | max_size;
if (callback) {
usbd_dev->user_callback_ctr[addr][USB_TRANSACTION_OUT] =
(void *)callback;
}
}
}
static void efm32lg_endpoints_reset(usbd_device *usbd_dev)
{
/* The core resets the endpoints automatically on reset. */
usbd_dev->fifo_mem_top = usbd_dev->fifo_mem_top_ep0;
}
static void efm32lg_ep_stall_set(usbd_device *usbd_dev, uint8_t addr,
uint8_t stall)
{
(void)usbd_dev;
if (addr == 0) {
if (stall) {
USB_DIEPx_CTL(addr) |= USB_DIEP0CTL_STALL;
} else {
USB_DIEPx_CTL(addr) &= ~USB_DIEP0CTL_STALL;
}
}
if (addr & 0x80) {
addr &= 0x7F;
if (stall) {
USB_DIEPx_CTL(addr) |= USB_DIEP0CTL_STALL;
} else {
USB_DIEPx_CTL(addr) &= ~USB_DIEP0CTL_STALL;
USB_DIEPx_CTL(addr) |= USB_DIEP0CTL_SD0PID;
}
} else {
if (stall) {
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_STALL;
} else {
USB_DOEPx_CTL(addr) &= ~USB_DOEP0CTL_STALL;
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_SD0PID;
}
}
}
static uint8_t efm32lg_ep_stall_get(usbd_device *usbd_dev, uint8_t addr)
{
(void)usbd_dev;
/* Return non-zero if STALL set. */
if (addr & 0x80) {
return (USB_DIEPx_CTL(addr & 0x7f) &
USB_DIEP0CTL_STALL) ? 1 : 0;
} else {
return (USB_DOEPx_CTL(addr) &
USB_DOEP0CTL_STALL) ? 1 : 0;
}
}
static void efm32lg_ep_nak_set(usbd_device *usbd_dev, uint8_t addr, uint8_t nak)
{
/* It does not make sence to force NAK on IN endpoints. */
if (addr & 0x80) {
return;
}
usbd_dev->force_nak[addr] = nak;
if (nak) {
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_SNAK;
} else {
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_CNAK;
}
}
static uint16_t efm32lg_ep_write_packet(usbd_device *usbd_dev, uint8_t addr,
const void *buf, uint16_t len)
{
(void)usbd_dev;
const uint32_t *buf32 = buf;
int i;
addr &= 0x7F;
/* Return if endpoint is already enabled. */
if (USB_DIEPx_TSIZ(addr) & USB_DIEP0TSIZ_PKTCNT) {
return 0;
}
/* Enable endpoint for transmission. */
USB_DIEPx_TSIZ(addr) = USB_DIEP0TSIZ_PKTCNT | len;
USB_DIEPx_CTL(addr) |= USB_DIEP0CTL_EPENA |
USB_DIEP0CTL_CNAK;
volatile uint32_t *fifo = USB_FIFOxD(addr);
/* Copy buffer to endpoint FIFO, note - memcpy does not work */
for (i = len; i > 0; i -= 4) {
*fifo++ = *buf32++;
}
return len;
}
static uint16_t efm32lg_ep_read_packet(usbd_device *usbd_dev, uint8_t addr,
void *buf, uint16_t len)
{
int i;
uint32_t *buf32 = buf;
uint32_t extra;
len = MIN(len, usbd_dev->rxbcnt);
usbd_dev->rxbcnt -= len;
volatile uint32_t *fifo = USB_FIFOxD(addr);
for (i = len; i >= 4; i -= 4) {
*buf32++ = *fifo++;
}
if (i) {
extra = *fifo++;
memcpy(buf32, &extra, i);
}
USB_DOEPx_TSIZ(addr) = usbd_dev->doeptsiz[addr];
USB_DOEPx_CTL(addr) |= USB_DOEP0CTL_EPENA |
(usbd_dev->force_nak[addr] ?
USB_DOEP0CTL_SNAK : USB_DOEP0CTL_CNAK);
return len;
}
static void efm32lg_poll(usbd_device *usbd_dev)
{
/* Read interrupt status register. */
uint32_t intsts = USB_GINTSTS;
int i;
if (intsts & USB_GINTSTS_ENUMDNE) {
/* Handle USB RESET condition. */
USB_GINTSTS = USB_GINTSTS_ENUMDNE;
usbd_dev->fifo_mem_top = usbd_dev->driver->rx_fifo_size;
_usbd_reset(usbd_dev);
return;
}
/* Note: RX and TX handled differently in this device. */
if (intsts & USB_GINTSTS_RXFLVL) {
/* Receive FIFO non-empty. */
uint32_t rxstsp = USB_GRXSTSP;
uint32_t pktsts = rxstsp & USB_GRXSTSP_PKTSTS_MASK;
if ((pktsts != USB_GRXSTSP_PKTSTS_OUT) &&
(pktsts != USB_GRXSTSP_PKTSTS_SETUP)) {
return;
}
uint8_t ep = rxstsp & USB_GRXSTSP_EPNUM_MASK;
uint8_t type;
if (pktsts == USB_GRXSTSP_PKTSTS_SETUP) {
type = USB_TRANSACTION_SETUP;
} else {
type = USB_TRANSACTION_OUT;
}
/* Save packet size for stm32f107_ep_read_packet(). */
usbd_dev->rxbcnt = (rxstsp & USB_GRXSTSP_BCNT_MASK) >> 4;
/*
* FIXME: Why is a delay needed here?
* This appears to fix a problem where the first 4 bytes
* of the DATA OUT stage of a control transaction are lost.
*/
for (i = 0; i < 1000; i++) {
__asm__("nop");
}
if (usbd_dev->user_callback_ctr[ep][type]) {
usbd_dev->user_callback_ctr[ep][type] (usbd_dev, ep);
}
/* Discard unread packet data. */
for (i = 0; i < usbd_dev->rxbcnt; i += 4) {
(void)*USB_FIFOxD(ep);
}
usbd_dev->rxbcnt = 0;
}
/*
* There is no global interrupt flag for transmit complete.
* The XFRC bit must be checked in each USB_DIEPx_INT(x).
*/
for (i = 0; i < ENDPOINT_COUNT; i++) { /* Iterate over endpoints. */
if (USB_DIEPx_INT(i) & USB_DIEP_INT_XFRC) {
/* Transfer complete. */
if (usbd_dev->user_callback_ctr[i]
[USB_TRANSACTION_IN]) {
usbd_dev->user_callback_ctr[i]
[USB_TRANSACTION_IN](usbd_dev, i);
}
USB_DIEPx_INT(i) = USB_DIEP_INT_XFRC;
}
}
if (intsts & USB_GINTSTS_USBSUSP) {
if (usbd_dev->user_callback_suspend) {
usbd_dev->user_callback_suspend();
}
USB_GINTSTS = USB_GINTSTS_USBSUSP;
}
if (intsts & USB_GINTSTS_WKUPINT) {
if (usbd_dev->user_callback_resume) {
usbd_dev->user_callback_resume();
}
USB_GINTSTS = USB_GINTSTS_WKUPINT;
}
if (intsts & USB_GINTSTS_SOF) {
if (usbd_dev->user_callback_sof) {
usbd_dev->user_callback_sof();
}
USB_GINTSTS = USB_GINTSTS_SOF;
}
if (usbd_dev->user_callback_sof) {
USB_GINTMSK |= USB_GINTMSK_SOFM;
} else {
USB_GINTMSK &= ~USB_GINTMSK_SOFM;
}
}
static void efm32lg_disconnect(usbd_device *usbd_dev, bool disconnected)
{
(void)usbd_dev;
if (disconnected) {
USB_DCTL |= USB_DCTL_SDIS;
} else {
USB_DCTL &= ~USB_DCTL_SDIS;
}
}
const struct _usbd_driver efm32lg_usb_driver = {
.init = efm32lg_usbd_init,
.set_address = efm32lg_set_address,
.ep_setup = efm32lg_ep_setup,
.ep_reset = efm32lg_endpoints_reset,
.ep_stall_set = efm32lg_ep_stall_set,
.ep_stall_get = efm32lg_ep_stall_get,
.ep_nak_set = efm32lg_ep_nak_set,
.ep_write_packet = efm32lg_ep_write_packet,
.ep_read_packet = efm32lg_ep_read_packet,
.poll = efm32lg_poll,
.disconnect = efm32lg_disconnect,
.base_address = USB_BASE,
.set_address_before_status = 1,
.rx_fifo_size = RX_FIFO_SIZE,
};
/**@}*/