You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
392 lines
8.2 KiB
392 lines
8.2 KiB
/** @defgroup rcc_file RCC peripheral API
|
|
*
|
|
* @ingroup peripheral_apis
|
|
*
|
|
* @section rcc_f2_api_ex Reset and Clock Control API.
|
|
*
|
|
* @brief <b>libopencm3 STM32F2xx Reset and Clock Control</b>
|
|
*
|
|
* @author @htmlonly © @endhtmlonly 2013 Frantisek Burian <BuFran at seznam.cz>
|
|
*
|
|
* @date 18 Jun 2013
|
|
*
|
|
* This library supports the Reset and Clock Control System in the STM32 series
|
|
* of ARM Cortex Microcontrollers by ST Microelectronics.
|
|
*
|
|
* LGPL License Terms @ref lgpl_license
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Federico Ruiz-Ugalde <memeruiz at gmail dot com>
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/cm3/assert.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/flash.h>
|
|
|
|
/**@{*/
|
|
|
|
/* Set the default clock frequencies after reset. */
|
|
uint32_t rcc_ahb_frequency = 16000000;
|
|
uint32_t rcc_apb1_frequency = 16000000;
|
|
uint32_t rcc_apb2_frequency = 16000000;
|
|
|
|
const struct rcc_clock_scale rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_END] = {
|
|
{ /* 120MHz */
|
|
.pllm = 8,
|
|
.plln = 240,
|
|
.pllp = 2,
|
|
.pllq = 5,
|
|
.hpre = RCC_CFGR_HPRE_DIV_NONE,
|
|
.ppre1 = RCC_CFGR_PPRE_DIV_4,
|
|
.ppre2 = RCC_CFGR_PPRE_DIV_2,
|
|
.flash_config = FLASH_ACR_DCEN | FLASH_ACR_ICEN |
|
|
FLASH_ACR_LATENCY_3WS,
|
|
.apb1_frequency = 30000000,
|
|
.apb2_frequency = 60000000,
|
|
},
|
|
};
|
|
|
|
void rcc_osc_ready_int_clear(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
RCC_CIR |= RCC_CIR_PLLRDYC;
|
|
break;
|
|
case RCC_HSE:
|
|
RCC_CIR |= RCC_CIR_HSERDYC;
|
|
break;
|
|
case RCC_HSI:
|
|
RCC_CIR |= RCC_CIR_HSIRDYC;
|
|
break;
|
|
case RCC_LSE:
|
|
RCC_CIR |= RCC_CIR_LSERDYC;
|
|
break;
|
|
case RCC_LSI:
|
|
RCC_CIR |= RCC_CIR_LSIRDYC;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rcc_osc_ready_int_enable(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
RCC_CIR |= RCC_CIR_PLLRDYIE;
|
|
break;
|
|
case RCC_HSE:
|
|
RCC_CIR |= RCC_CIR_HSERDYIE;
|
|
break;
|
|
case RCC_HSI:
|
|
RCC_CIR |= RCC_CIR_HSIRDYIE;
|
|
break;
|
|
case RCC_LSE:
|
|
RCC_CIR |= RCC_CIR_LSERDYIE;
|
|
break;
|
|
case RCC_LSI:
|
|
RCC_CIR |= RCC_CIR_LSIRDYIE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rcc_osc_ready_int_disable(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
RCC_CIR &= ~RCC_CIR_PLLRDYIE;
|
|
break;
|
|
case RCC_HSE:
|
|
RCC_CIR &= ~RCC_CIR_HSERDYIE;
|
|
break;
|
|
case RCC_HSI:
|
|
RCC_CIR &= ~RCC_CIR_HSIRDYIE;
|
|
break;
|
|
case RCC_LSE:
|
|
RCC_CIR &= ~RCC_CIR_LSERDYIE;
|
|
break;
|
|
case RCC_LSI:
|
|
RCC_CIR &= ~RCC_CIR_LSIRDYIE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
int rcc_osc_ready_int_flag(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
return ((RCC_CIR & RCC_CIR_PLLRDYF) != 0);
|
|
break;
|
|
case RCC_HSE:
|
|
return ((RCC_CIR & RCC_CIR_HSERDYF) != 0);
|
|
break;
|
|
case RCC_HSI:
|
|
return ((RCC_CIR & RCC_CIR_HSIRDYF) != 0);
|
|
break;
|
|
case RCC_LSE:
|
|
return ((RCC_CIR & RCC_CIR_LSERDYF) != 0);
|
|
break;
|
|
case RCC_LSI:
|
|
return ((RCC_CIR & RCC_CIR_LSIRDYF) != 0);
|
|
break;
|
|
}
|
|
|
|
cm3_assert_not_reached();
|
|
}
|
|
|
|
void rcc_css_int_clear(void)
|
|
{
|
|
RCC_CIR |= RCC_CIR_CSSC;
|
|
}
|
|
|
|
int rcc_css_int_flag(void)
|
|
{
|
|
return ((RCC_CIR & RCC_CIR_CSSF) != 0);
|
|
}
|
|
|
|
bool rcc_is_osc_ready(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
return RCC_CR & RCC_CR_PLLRDY;
|
|
case RCC_HSE:
|
|
return RCC_CR & RCC_CR_HSERDY;
|
|
case RCC_HSI:
|
|
return RCC_CR & RCC_CR_HSIRDY;
|
|
case RCC_LSE:
|
|
return RCC_BDCR & RCC_BDCR_LSERDY;
|
|
case RCC_LSI:
|
|
return RCC_CSR & RCC_CSR_LSIRDY;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void rcc_wait_for_osc_ready(enum rcc_osc osc)
|
|
{
|
|
while (!rcc_is_osc_ready(osc));
|
|
}
|
|
|
|
void rcc_wait_for_sysclk_status(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
while (((RCC_CFGR >> RCC_CFGR_SWS_SHIFT) & RCC_CFGR_SWS_MASK) !=
|
|
RCC_CFGR_SWS_PLL);
|
|
break;
|
|
case RCC_HSE:
|
|
while (((RCC_CFGR >> RCC_CFGR_SWS_SHIFT) & RCC_CFGR_SWS_MASK) !=
|
|
RCC_CFGR_SWS_HSE);
|
|
break;
|
|
case RCC_HSI:
|
|
while (((RCC_CFGR >> RCC_CFGR_SWS_SHIFT) & RCC_CFGR_SWS_MASK) !=
|
|
RCC_CFGR_SWS_HSI);
|
|
break;
|
|
default:
|
|
/* Shouldn't be reached. */
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rcc_osc_on(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
RCC_CR |= RCC_CR_PLLON;
|
|
break;
|
|
case RCC_HSE:
|
|
RCC_CR |= RCC_CR_HSEON;
|
|
break;
|
|
case RCC_HSI:
|
|
RCC_CR |= RCC_CR_HSION;
|
|
break;
|
|
case RCC_LSE:
|
|
RCC_BDCR |= RCC_BDCR_LSEON;
|
|
break;
|
|
case RCC_LSI:
|
|
RCC_CSR |= RCC_CSR_LSION;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rcc_osc_off(enum rcc_osc osc)
|
|
{
|
|
switch (osc) {
|
|
case RCC_PLL:
|
|
RCC_CR &= ~RCC_CR_PLLON;
|
|
break;
|
|
case RCC_HSE:
|
|
RCC_CR &= ~RCC_CR_HSEON;
|
|
break;
|
|
case RCC_HSI:
|
|
RCC_CR &= ~RCC_CR_HSION;
|
|
break;
|
|
case RCC_LSE:
|
|
RCC_BDCR &= ~RCC_BDCR_LSEON;
|
|
break;
|
|
case RCC_LSI:
|
|
RCC_CSR &= ~RCC_CSR_LSION;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rcc_css_enable(void)
|
|
{
|
|
RCC_CR |= RCC_CR_CSSON;
|
|
}
|
|
|
|
void rcc_css_disable(void)
|
|
{
|
|
RCC_CR &= ~RCC_CR_CSSON;
|
|
}
|
|
|
|
void rcc_set_sysclk_source(uint32_t clk)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_CFGR;
|
|
reg32 &= ~((1 << 1) | (1 << 0));
|
|
RCC_CFGR = (reg32 | clk);
|
|
}
|
|
|
|
void rcc_set_pll_source(uint32_t pllsrc)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_PLLCFGR;
|
|
reg32 &= ~(1 << 22);
|
|
RCC_PLLCFGR = (reg32 | (pllsrc << 22));
|
|
}
|
|
|
|
void rcc_set_ppre2(uint32_t ppre2)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_CFGR;
|
|
reg32 &= ~((1 << 13) | (1 << 14) | (1 << 15));
|
|
RCC_CFGR = (reg32 | (ppre2 << 13));
|
|
}
|
|
|
|
void rcc_set_ppre1(uint32_t ppre1)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_CFGR;
|
|
reg32 &= ~((1 << 10) | (1 << 11) | (1 << 12));
|
|
RCC_CFGR = (reg32 | (ppre1 << 10));
|
|
}
|
|
|
|
void rcc_set_hpre(uint32_t hpre)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_CFGR;
|
|
reg32 &= ~((1 << 4) | (1 << 5) | (1 << 6) | (1 << 7));
|
|
RCC_CFGR = (reg32 | (hpre << 4));
|
|
}
|
|
|
|
void rcc_set_rtcpre(uint32_t rtcpre)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = RCC_CFGR;
|
|
reg32 &= ~((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19) | (1 << 20));
|
|
RCC_CFGR = (reg32 | (rtcpre << 16));
|
|
}
|
|
|
|
void rcc_set_main_pll_hsi(uint32_t pllm, uint32_t plln, uint32_t pllp,
|
|
uint32_t pllq)
|
|
{
|
|
RCC_PLLCFGR = (pllm << RCC_PLLCFGR_PLLM_SHIFT) |
|
|
(plln << RCC_PLLCFGR_PLLN_SHIFT) |
|
|
(((pllp >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) |
|
|
(pllq << RCC_PLLCFGR_PLLQ_SHIFT);
|
|
}
|
|
|
|
void rcc_set_main_pll_hse(uint32_t pllm, uint32_t plln, uint32_t pllp,
|
|
uint32_t pllq)
|
|
{
|
|
RCC_PLLCFGR = (pllm << RCC_PLLCFGR_PLLM_SHIFT) |
|
|
(plln << RCC_PLLCFGR_PLLN_SHIFT) |
|
|
(((pllp >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) |
|
|
RCC_PLLCFGR_PLLSRC |
|
|
(pllq << RCC_PLLCFGR_PLLQ_SHIFT);
|
|
}
|
|
|
|
uint32_t rcc_system_clock_source(void)
|
|
{
|
|
/* Return the clock source which is used as system clock. */
|
|
return (RCC_CFGR & 0x000c) >> 2;
|
|
}
|
|
|
|
void rcc_clock_setup_hse_3v3(const struct rcc_clock_scale *clock)
|
|
{
|
|
/* Enable internal high-speed oscillator. */
|
|
rcc_osc_on(RCC_HSI);
|
|
rcc_wait_for_osc_ready(RCC_HSI);
|
|
|
|
/* Select HSI as SYSCLK source. */
|
|
rcc_set_sysclk_source(RCC_CFGR_SW_HSI);
|
|
|
|
/* Enable external high-speed oscillator 8MHz. */
|
|
rcc_osc_on(RCC_HSE);
|
|
rcc_wait_for_osc_ready(RCC_HSE);
|
|
|
|
/*
|
|
* Set prescalers for AHB, ADC, APB1, APB2.
|
|
* Do this before touching the PLL (TODO: why?).
|
|
*/
|
|
rcc_set_hpre(clock->hpre);
|
|
rcc_set_ppre1(clock->ppre1);
|
|
rcc_set_ppre2(clock->ppre2);
|
|
|
|
/* Disable PLL oscillator before changing its configuration. */
|
|
rcc_osc_off(RCC_PLL);
|
|
|
|
/* Configure the PLL oscillator. */
|
|
rcc_set_main_pll_hse(clock->pllm, clock->plln,
|
|
clock->pllp, clock->pllq);
|
|
|
|
/* Enable PLL oscillator and wait for it to stabilize. */
|
|
rcc_osc_on(RCC_PLL);
|
|
rcc_wait_for_osc_ready(RCC_PLL);
|
|
|
|
/* Configure flash settings. */
|
|
flash_set_ws(clock->flash_config);
|
|
|
|
/* Select PLL as SYSCLK source. */
|
|
rcc_set_sysclk_source(RCC_CFGR_SW_PLL);
|
|
|
|
/* Wait for PLL clock to be selected. */
|
|
rcc_wait_for_sysclk_status(RCC_PLL);
|
|
|
|
/* Set the peripheral clock frequencies used. */
|
|
rcc_apb1_frequency = clock->apb1_frequency;
|
|
rcc_apb2_frequency = clock->apb2_frequency;
|
|
}
|
|
|
|
void rcc_backupdomain_reset(void)
|
|
{
|
|
/* Set the backup domain software reset. */
|
|
RCC_BDCR |= RCC_BDCR_BDRST;
|
|
|
|
/* Clear the backup domain software reset. */
|
|
RCC_BDCR &= ~RCC_BDCR_BDRST;
|
|
}
|
|
|
|
/**@}*/
|
|
|