You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
140 lines
3.2 KiB
140 lines
3.2 KiB
/** @defgroup ssp_file SSP
|
|
|
|
@ingroup LPC43xx
|
|
|
|
@brief <b>libopencm3 LPC43xx SSP</b>
|
|
|
|
@version 1.0.0
|
|
|
|
@author @htmlonly © @endhtmlonly 2012 Benjamin Vernoux <titanmkd@gmail.com>
|
|
|
|
LGPL License Terms @ref lgpl_license
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**@{*/
|
|
|
|
#include <libopencm3/lpc43xx/ssp.h>
|
|
#include <libopencm3/lpc43xx/cgu.h>
|
|
|
|
/* Disable SSP */
|
|
void ssp_disable(ssp_num_t ssp_num)
|
|
{
|
|
uint32_t ssp_port;
|
|
|
|
if (ssp_num == SSP0_NUM) {
|
|
ssp_port = SSP0;
|
|
} else {
|
|
ssp_port = SSP1;
|
|
}
|
|
/* Disable SSP */
|
|
SSP_CR1(ssp_port) = 0x0;
|
|
}
|
|
|
|
/*
|
|
* SSP Init function
|
|
*/
|
|
void ssp_init(ssp_num_t ssp_num,
|
|
ssp_datasize_t data_size,
|
|
ssp_frame_format_t frame_format,
|
|
ssp_cpol_cpha_t cpol_cpha_format,
|
|
uint8_t serial_clock_rate,
|
|
uint8_t clk_prescale,
|
|
ssp_mode_t mode,
|
|
ssp_master_slave_t master_slave,
|
|
ssp_slave_option_t slave_option)
|
|
{
|
|
uint32_t ssp_port;
|
|
uint32_t clock;
|
|
|
|
if (ssp_num == SSP0_NUM) {
|
|
ssp_port = SSP0;
|
|
} else {
|
|
ssp_port = SSP1;
|
|
}
|
|
|
|
/* use PLL1 as clock source for SSP1 */
|
|
CGU_BASE_SSP1_CLK =
|
|
CGU_BASE_SSP1_CLK_CLK_SEL(CGU_SRC_PLL1)
|
|
| CGU_BASE_SSP1_CLK_AUTOBLOCK;
|
|
|
|
/* Disable SSP before to configure it */
|
|
SSP_CR1(ssp_port) = 0x0;
|
|
|
|
/* Configure SSP */
|
|
clock = serial_clock_rate;
|
|
SSP_CPSR(ssp_port) = clk_prescale;
|
|
SSP_CR0(ssp_port) =
|
|
(data_size | frame_format | cpol_cpha_format | (clock<<8));
|
|
|
|
/* Enable SSP */
|
|
SSP_CR1(ssp_port) = (SSP_ENABLE | mode | master_slave | slave_option);
|
|
}
|
|
|
|
static void ssp_wait_until_not_busy(ssp_num_t ssp_num)
|
|
{
|
|
uint32_t ssp_port;
|
|
|
|
if (ssp_num == SSP0_NUM) {
|
|
ssp_port = SSP0;
|
|
} else {
|
|
ssp_port = SSP1;
|
|
}
|
|
|
|
while ((SSP_SR(ssp_port) & SSP_SR_BSY));
|
|
}
|
|
|
|
/* This Function Wait Data TX Ready, and Write Data to SSP */
|
|
uint16_t ssp_transfer(ssp_num_t ssp_num, uint16_t data)
|
|
{
|
|
uint32_t ssp_port;
|
|
|
|
if (ssp_num == SSP0_NUM) {
|
|
ssp_port = SSP0;
|
|
} else {
|
|
ssp_port = SSP1;
|
|
}
|
|
|
|
/* Wait Until FIFO not full */
|
|
while ((SSP_SR(ssp_port) & SSP_SR_TNF) == 0);
|
|
|
|
SSP_DR(ssp_port) = data;
|
|
|
|
/* Wait for not busy, since we're controlling CS# of
|
|
* devices manually and need to wait for the data to
|
|
* be sent. It may also be important to wait here
|
|
* in case we're configuring devices via SPI and also
|
|
* with GPIO control -- we need to know when SPI
|
|
* commands are effective before altering a device's
|
|
* state with GPIO. I'm thinking the MAX2837, for
|
|
* example...
|
|
*/
|
|
ssp_wait_until_not_busy(ssp_num);
|
|
|
|
/* Wait Until Data Received (Rx FIFO not Empty) */
|
|
while ((SSP_SR(ssp_port) & SSP_SR_RNE) == 0);
|
|
|
|
return SSP_DR(ssp_port);
|
|
}
|
|
|
|
|
|
/**@}*/
|
|
|
|
|