CPU		= ARMARCH7
TOOL	= gnu

EXTRA_DEFINE  = -DCPU_CORTEXA8 -DARMMMU=ARMMMU_CORTEXA8 \
                -DARMCACHE=ARMCACHE_CORTEXA8


TGT_DIR = $(WIND_BASE)/target

include $(TGT_DIR)/h/make/defs.bsp

## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.
TARGET_DIR	= ft20004_km02
BOARD		= ft2000/4 km02 board

RELEASE		+= bootrom_uncmp.hex

MACH_EXTRA      +=  vxbArmGenIntCtlrV3.o  vxbArmv7GenTimer.o vxbArmv7AuxTimer.o \
		   vxbFtPcie.o vxbAhciStorage.o vxbFtGmacEnd.o vxbFtcan.o vxbPci.o \
		   vxbFtSdCtrl.o vxbFtI2c.o vxbYt8521Phy.o genericPhy.o vxbFtQspi.o\
		   vxbSp25SpiFlash.o vxbFtGpio.o vxbFtSpi.o vxbSm2130SpiDev.o vxbLfsLib.o \
		   vxbSpiRawDev.o bspStubs.o bspEnv.o \

ifneq ($(findstring  bootrom,$(MAKECMDGOALS)),bootrom)
LIB_EXTRA = lib/libFtX100dcdrv.a
endif

RAM_LOW_ADRS	= 80100000 # RAM text/data address
RAM_HIGH_ADRS	= ff000000 # RAM text/data address

VMA_START	= 0x$(ROM_TEXT_ADRS)

#EXTRA_INCLUDE += -I./include

ADDED_CFLAGS += -DARM_AARCH64

include $(TGT_DIR)/h/make/rules.bsp

#  uboot cmd:
#      setenv ipaddr 192.168.2.145
#      tftpboot 0x80100000 192.168.2.144:vxWorks.bin
#      bootvx32 0x80100000
#