You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
guochunrong
6d0a53d35d
|
2 years ago | |
|---|---|---|
| .. | ||
| patches/uboot | 2 years ago | |
| genimage.cfg | 2 years ago | |
| readme.txt | 2 years ago | |
| uboot-env.txt | 2 years ago | |
readme.txt
*********************
* MIPS Creator CI20 *
*********************
Introduction
============
The 'ci20_defconfig' will create a root filesystem and a kernel image
under the 'output/images/' directory. This document will try to explain how
to use them in order to run Buildroot in the MIPS Creator CI20 board.
How to build it
===============
Configure Buildroot
-------------------
$ make ci20_defconfig
Build the rootfs
----------------
Note: you will need to have access to the network, since Buildroot will
download the packages' sources.
You may now build your rootfs with:
$ make
(This may take a while, consider getting yourself a coffee ;-) )
How to write the SD card
========================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Make sure the SD card is not mounted then copy the bootable "sdcard.img" onto
it with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Insert the SDcard into your ci20, and power it up. Your new system
should come up now and start a console on the UART HEADER.
see: https://elinux.org/CI20_Hardware#Dedicated_UART_header