!169 部分例程更新

* code update 2024_07_26

arch/armv8/aarch32/arch_compiler.mk

@@ -126,6 +126,7 @@ endif
 # Enable all warnings if enabled
 ifeq ($(CONFIG_DEBUG_ENABLE_ALL_WARNING),y)
   ARCH_DEBUG += -Wall
+  ARCH_DEBUG += -Wno-format
 endif
 
 

arch/armv8/aarch32/gcc/fcrt0.S

@@ -26,7 +26,6 @@
 
 #include "sdkconfig.h"
 .set FPEXC_EN,		0x40000000		/* FPU enable bit, (1 << 30) */
-    .file "crt0.S"
     .section ".got2","aw"
     .align 2
 

arch/armv8/aarch64/arch_compiler.mk

@@ -158,6 +158,7 @@ endif
 # Enable all warnings if enabled
 ifeq ($(CONFIG_DEBUG_ENABLE_ALL_WARNING),y)
   ARCH_DEBUG += -Wall
+  ARCH_DEBUG += -Wno-format
 endif
 
 

arch/armv8/aarch64/gcc/fcrt0.S

@@ -24,7 +24,6 @@
  *  1.2  zhugengyu 2023/02/23   support dcache flush for early boot
  */
 #include "sdkconfig.h"
-    .file "fcrt0.S"
     .section ".got2","aw"
     .align 2
 

doc/ChangeLog.md

@@ -1,3 +1,63 @@
+# Phytium Standalone SDK 2024-07-25 ChangeLog
+
+Change Log since 2024-07-25
+
+## example
+
+- add spi pressure, intr_trigger test
+- simplify spi intr, poll example
+- repair some compile error under no letter shell mode
+
+## driver
+
+- modify spim data struct
+
+# Phytium Standalone SDK 2024-07-25 ChangeLog
+
+Change Log since 2024-07-23
+
+## example
+
+- Add the example of sending and receiving mac frames in phy loopback mode
+
+
+# Phytium Standalone SDK 2024-07-23 ChangeLog
+
+Change Log since 2024-07-23
+
+## example
+
+- Eliminate example compilation warnings
+
+# Phytium Standalone SDK 2024-07-17 ChangeLog
+
+Change Log since 2024-07-17
+
+## driver
+
+- Eliminating Partial Compilation Warnings
+
+## example
+
+- Eliminating Partial Compilation Warnings
+
+
+# Phytium Standalone SDK 2024-07-12 ChangeLog
+
+Change Log since 2024-07-10
+
+## example
+
+- modify the static addr using the _attribute__((packed)),include the media and i2s
+
+# Phytium Standalone SDK 2024-07-10 ChangeLog
+
+Change Log since 2024-07-10
+
+## example
+
+- modify qspi dual flash stack example
+
 # Phytium Standalone SDK 2024-07-10 ChangeLog
 
 Change Log since 2024-07-08

doc/reference/driver/fi2c.md

@@ -161,24 +161,6 @@ Return:
 
     无
     
-```c
-const char *FI2cErrorToMessage(FError error);
-```
-
-- 获取I2C模块错误码对应的错误信息
-
-Note:
-
-    - 请输入属于FI2C模块的错误码，否则返回的错误信息为空
-
-Input:
-
-    - {FError} error, I2C输入错误码
-
-Return:
-
-    - {const char *}, 错误码信息，NULL表示失败
-
 ```c
 FError FI2cMasterReadPoll(FI2c *instance_p, u32 mem_addr, u8 mem_byte_len, u8 *buf_p, u32 buf_len);
 ```

doc/reference/driver/fspim.md

@@ -79,6 +79,12 @@ typedef struct
     FSpimCpolType        cpol;         /* Polarity of the clock */
     FSpimCphaType        cpha;         /* Phase of the clock */
     boolean              en_test;      /* Enable test mode */
+    boolean              en_dma;       /* Enable DMA */
+    FSpimTransWay        trans_way;    /*transfer way: poll, interrupt, ddma*/
+    u32                  tx_fifo_threshold;   /*set tx fifo threshold */
+    u32                  rx_fifo_threshold;   /* set rx fifo threshold */
+    u32                  rx_dma_level;        /* set rx dma level */
+    u32                  tx_dma_level;       /*set tx dma level */
 } FSpimConfig;
 ```
 
@@ -353,26 +359,6 @@ Return:
 
 无
 
-#### FSpimErrorToMessage
-
-- 获取FSPIM驱动错误码 
-
-```c
-const char *FSpimErrorToMessage(FError error);
-```
-
-Note:
-
-无
-
-Input:
-
-- FError error, FSPIM模块错误码
-
-Return:
-
-const char *, FSPIM模块错误码对应的信息
-
 #### FSpimSetChipSelection
 
 - 依据控制器config中的slave device id，控制相应cs上下拉

drivers/dma/fddma/fddma.c

@@ -74,7 +74,7 @@ static FError FDdmaReset(FDdma *const instance_p)
 
 		if (instance_p->bind_status & BIT(chan_id))
 		{
-			instance_p->bind_status |~ BIT(chan_id);
+			instance_p->bind_status &= ~BIT(chan_id);
 		}
 	}
 	FDDMA_INFO("Finish to reset all DDMA channels.");

drivers/dma/fgdma/fgdma.c

@@ -127,7 +127,7 @@ static void FGdmaReset(FGdma *const instance_p)
             FGdmaClearChanStatus(base_addr, chan_id, FGDMA_CHX_INT_STATE_ALL);
             FGdmaChanSoftReset(base_addr, chan_id);
             FGdmaSetChanClock(base_addr, chan_id, FALSE);
-            instance_p->chan_ready_flag |~ BIT(chan_id);
+            instance_p->chan_ready_flag &= ~BIT(chan_id);
         }
     }
     FGDMA_INFO("Reset all GDMA chans.");

drivers/eth/fgmac/fgmac.c

@@ -298,7 +298,6 @@ void FGmacControllerDuplexConfig(FGmac *instance_p, u32 duplex)
 static FError FGmacControllerConfigure(FGmac *instance_p)
 {
     FASSERT(instance_p);
-    FGmacMacAddr mac_addr;
     uintptr base_addr = instance_p->config.base_addr;
     FError ret = FGMAC_SUCCESS;
     u32 reg_val = 0;

drivers/eth/fgmac/fgmac_hw.h

@@ -277,7 +277,7 @@ extern "C"
 #define FGMAC_DMA_BUS_SWR           BIT(0) /* 软件复位 */
 #define FGMAC_DMA_BUS_DA            BIT(1) /* 设置 8xPBL 模式 */
 #define FGMAC_DMA_BUS_DSL_MASK      GENMASK(6, 2) /* 描述符跳跃长度 */
-#define FGMAC_DMA_BUS_ATDS          BIT(7) /* 
+#define FGMAC_DMA_BUS_ATDS          BIT(7) 
 #define FGMAC_DMA_BUS_PBL_MASK      GENMASK(13, 8) /* 可编程突发长度 */
 #define FGMAC_DMA_BUS_PBL(x)        ((x) << 8)
 enum

drivers/eth/fgmac/phy/fgmac_phy.c

@@ -371,7 +371,6 @@ FError FGmacPhyReset(FGmac *instance_p, u32 phy_address)
 {
     FError ret = FGMAC_ERR_PHY_NOT_SUPPORT;
     u16 control;
-    uintptr base_addr = instance_p->config.base_addr;
     ret = FGmacWritePhyReg(instance_p, phy_address, FGMAC_PHY_MII_CTRL_REG, FGMAC_PHY_MII_CR_RESET);
     if (FGMAC_SUCCESS != ret)
     {
@@ -450,7 +449,6 @@ static FError FGmacGetPhySpecialStatus(FGmac *instance_p, u32 phy_address)
 FError FGmacPhyCfgInitialize(FGmac *instance_p,u32 reset_flag)
 {
     FASSERT(instance_p);
-    uintptr base_addr = instance_p->config.base_addr;
     FError ret = FGMAC_SUCCESS;
     u32 phy_addr;
 
@@ -520,7 +518,6 @@ FError FGmacPhyCfgInitialize(FGmac *instance_p,u32 reset_flag)
 FError FGmacPhyCfgDeInitialize(FGmac *instance_p)
 {
     FASSERT(instance_p);
-    uintptr base_addr = instance_p->config.base_addr;
     FError ret = FGMAC_SUCCESS;
     u32 phy_addr;
 

drivers/eth/fxmac/fxmac.h

@@ -31,7 +31,6 @@
 #include "ferror_code.h"
 #include "fxmac_hw.h"
 #include "fxmac_bdring.h"
-#include "fxmac_phy.h"
 #include "fparameters.h"
 
 #ifdef __cplusplus
@@ -328,21 +327,14 @@ void FXmacStop(FXmac *instance_p);
 void FXmacSetQueuePtr(FXmac *instance_p, uintptr QPtr, u8 QueueNum,
                       u32 direction);
 
-/* phy interface */
-FError FXmacPhyWrite(FXmac *instance_p, u32 phy_address,
-                     u32 register_num, u16 phy_data);
-
-FError FXmacPhyRead(FXmac *instance_p, u32 phy_address,
-                    u32 register_num, u16 *phydat_aptr);
-
-FError FXmacPhyInit(FXmac *instance_p, u32 speed, u32 duplex_mode, u32 autonegotiation_en,u32 reset_flag);
-
 void FXmacSelectClk(FXmac *instance_p);
 
 FError FXmacSetHandler(FXmac *instance_p, u32 handler_type, void *func_pointer, void *call_back_ref);
 /* interrupt */
 void FXmacIntrHandler(s32 vector, void *args);
 
+void FXmacQueueIrqDisable(FXmac *instance_p, u32 queue_num, u32 mask);
+
 void FXmacClearHash(FXmac *instance_p);
 
 /* hash table set */

drivers/eth/fxmac/fxmac_options.c

@@ -648,166 +648,6 @@ void FXmacClearHash(FXmac *instance_p)
                      FXMAC_HASHH_OFFSET, 0x0U);
 }
 
-
-/**
- * Write data to the specified PHY register. The Ethernet driver does not
- * require the device to be stopped before writing to the PHY.  Although it is
- * probably a good idea to stop the device, it is the responsibility of the
- * application to deem this necessary. The MAC provides the driver with the
- * ability to talk to a PHY that adheres to the Media Independent Interface
- * (MII) as defined in the IEEE 802.3 standard.
- *
- * Prior to PHY access with this function, the user should have setup the MDIO
- * clock with FXmacSetMdioDivisor().
- *
- * @param instance_p is a pointer to the FXmac instance to be worked on.
- * @param phy_address is the address of the PHY to be written (supports multiple
- *        PHYs)
- * @param register_num is the register number, 0-31, of the specific PHY register
- *        to write
- * @param phy_data is the 16-bit value that will be written to the register
- *
- * @return
- *
- * - FT_SUCCESS if the PHY was written to successfully. Since there is no error
- *   status from the MAC on a write, the user should read the PHY to verify the
- *   write was successful.
- * - FXMAC_ERR_PHY_BUSY if there is another PHY operation in progress
- *
- * @note
- *
- * This function is not thread-safe. The user must provide mutually exclusive
- * access to this function if there are to be multiple threads that can call it.
- *
- * There is the possibility that this function will not return if the hardware
- * is broken (i.e., it never sets the status bit indicating that the write is
- * done). If this is of concern to the user, the user should provide a mechanism
- * suitable to their needs for recovery.
- *
- * For the duration of this function, all host interface reads and writes are
- * blocked to the current FXmac instance.
- *
- ******************************************************************************/
-FError FXmacPhyWrite(FXmac *instance_p, u32 phy_address,
-                     u32 register_num, u16 phy_data)
-{
-    u32 mgtcr;
-    volatile u32 ipisr;
-    u32 ip_write_temp;
-    FError status;
-
-    FASSERT(instance_p != NULL);
-
-    /* Make sure no other PHY operation is currently in progress */
-    if ((!(FXMAC_READREG32(instance_p->config.base_address,
-                           FXMAC_NWSR_OFFSET) &
-           FXMAC_NWSR_MDIOIDLE_MASK)) == TRUE)
-    {
-        status = (FError)(FXMAC_ERR_PHY_BUSY);
-    }
-    else
-    {
-        /* Construct mgtcr mask for the operation */
-        mgtcr = FXMAC_PHYMNTNC_OP_MASK | FXMAC_PHYMNTNC_OP_W_MASK |
-                (phy_address << FXMAC_PHYMNTNC_PHAD_SHFT_MSK) |
-                (register_num << FXMAC_PHYMNTNC_PREG_SHFT_MSK) | (u32)phy_data;
-
-        /* Write mgtcr and wait for completion */
-        FXMAC_WRITEREG32(instance_p->config.base_address,
-                         FXMAC_PHYMNTNC_OFFSET, mgtcr);
-
-        do
-        {
-            ipisr = FXMAC_READREG32(instance_p->config.base_address,
-                                    FXMAC_NWSR_OFFSET);
-            ip_write_temp = ipisr;
-        }
-        while ((ip_write_temp & FXMAC_NWSR_MDIOIDLE_MASK) == 0x00000000U);
-
-        status = (FError)(FT_SUCCESS);
-    }
-    return status;
-}
-
-
-/**
- * Read the current value of the PHY register indicated by the phy_address and
- * the register_num parameters. The MAC provides the driver with the ability to
- * talk to a PHY that adheres to the Media Independent Interface (MII) as
- * defined in the IEEE 802.3 standard.
- *
- *
- * @param instance_p is a pointer to the FXmac instance to be worked on.
- * @param phy_address is the address of the PHY to be read (supports multiple
- *        PHYs)
- * @param register_num is the register number, 0-31, of the specific PHY register
- *        to read
- * @param phydat_aptr is an output parameter, and points to a 16-bit buffer into
- *        which the current value of the register will be copied.
- *
- * @return
- *
- * - FT_SUCCESS if the PHY was read from successfully
- * - FXMAC_ERR_PHY_BUSY if there is another PHY operation in progress
- *
- * @note
- *
- * This function is not thread-safe. The user must provide mutually exclusive
- * access to this function if there are to be multiple threads that can call it.
- *
- * There is the possibility that this function will not return if the hardware
- * is broken (i.e., it never sets the status bit indicating that the read is
- * done). If this is of concern to the user, the user should provide a mechanism
- * suitable to their needs for recovery.
- *
- * For the duration of this function, all host interface reads and writes are
- * blocked to the current FXmac instance.
- *
- ******************************************************************************/
-FError FXmacPhyRead(FXmac *instance_p, u32 phy_address,
-                    u32 register_num, u16 *phydat_aptr)
-{
-    u32 mgtcr;
-    volatile u32 ipisr;
-    u32 IpReadTemp;
-    FError status;
-
-    FASSERT(instance_p != NULL);
-
-    /* Make sure no other PHY operation is currently in progress */
-    if ((!(FXMAC_READREG32(instance_p->config.base_address,
-                           FXMAC_NWSR_OFFSET) &
-           FXMAC_NWSR_MDIOIDLE_MASK)) == TRUE)
-    {
-        status = (FError)(FXMAC_ERR_PHY_BUSY);
-    }
-    else
-    {
-        /* Construct mgtcr mask for the operation */
-        mgtcr = FXMAC_PHYMNTNC_OP_MASK | FXMAC_PHYMNTNC_OP_R_MASK |
-                (phy_address << FXMAC_PHYMNTNC_PHAD_SHFT_MSK) |
-                (register_num << FXMAC_PHYMNTNC_PREG_SHFT_MSK);
-
-        /* Write mgtcr and wait for completion */
-        FXMAC_WRITEREG32(instance_p->config.base_address,
-                         FXMAC_PHYMNTNC_OFFSET, mgtcr);
-
-        do
-        {
-            ipisr = FXMAC_READREG32(instance_p->config.base_address,
-                                    FXMAC_NWSR_OFFSET);
-            IpReadTemp = ipisr;
-        }
-        while ((IpReadTemp & FXMAC_NWSR_MDIOIDLE_MASK) == 0x00000000U);
-
-        /* Read data */
-        *phydat_aptr = (u16)FXMAC_READREG32(instance_p->config.base_address,
-                                            FXMAC_PHYMNTNC_OFFSET);
-        status = (FError)(FT_SUCCESS);
-    }
-    return status;
-}
-
 boolean FXmacUsxLinkStatus(FXmac *instance_p)
 {
     u32 reg = 0;

drivers/eth/fxmac/fxmac_phy.c

@@ -25,6 +25,7 @@
 #include "fxmac.h"
 #include "eth_ieee_reg.h"
 #include "fdrivers_port.h"
+#include "fxmac_phy.h"
 
 #if defined(CONFIG_FXMAC_PHY_YT)
     #include "phy_yt.h"
@@ -40,6 +41,162 @@
 static FXmac *instance_b;
 static u32 phy_addr_b;
 
+/**
+ * Write data to the specified PHY register. The Ethernet driver does not
+ * require the device to be stopped before writing to the PHY.  Although it is
+ * probably a good idea to stop the device, it is the responsibility of the
+ * application to deem this necessary. The MAC provides the driver with the
+ * ability to talk to a PHY that adheres to the Media Independent Interface
+ * (MII) as defined in the IEEE 802.3 standard.
+ *
+ * Prior to PHY access with this function, the user should have setup the MDIO
+ * clock with FXmacSetMdioDivisor().
+ *
+ * @param instance_p is a pointer to the FXmac instance to be worked on.
+ * @param phy_address is the address of the PHY to be written (supports multiple
+ *        PHYs)
+ * @param register_num is the register number, 0-31, of the specific PHY register
+ *        to write
+ * @param phy_data is the 16-bit value that will be written to the register
+ *
+ * @return
+ *
+ * - FT_SUCCESS if the PHY was written to successfully. Since there is no error
+ *   status from the MAC on a write, the user should read the PHY to verify the
+ *   write was successful.
+ * - FXMAC_ERR_PHY_BUSY if there is another PHY operation in progress
+ *
+ * @note
+ *
+ * This function is not thread-safe. The user must provide mutually exclusive
+ * access to this function if there are to be multiple threads that can call it.
+ *
+ * There is the possibility that this function will not return if the hardware
+ * is broken (i.e., it never sets the status bit indicating that the write is
+ * done). If this is of concern to the user, the user should provide a mechanism
+ * suitable to their needs for recovery.
+ *
+ * For the duration of this function, all host interface reads and writes are
+ * blocked to the current FXmac instance.
+ *
+ ******************************************************************************/
+FError FXmacPhyWrite(FXmac *instance_p, u32 phy_address, u32 register_num, u16 phy_data)
+{
+    u32 mgtcr;
+    volatile u32 ipisr;
+    u32 ip_write_temp;
+    FError status;
+
+    FASSERT(instance_p != NULL);
+
+    /* Make sure no other PHY operation is currently in progress */
+    if ((!(FXMAC_READREG32(instance_p->config.base_address,
+                           FXMAC_NWSR_OFFSET) &
+           FXMAC_NWSR_MDIOIDLE_MASK)) == TRUE)
+    {
+        status = (FError)(FXMAC_ERR_PHY_BUSY);
+    }
+    else
+    {
+        /* Construct mgtcr mask for the operation */
+        mgtcr = FXMAC_PHYMNTNC_OP_MASK | FXMAC_PHYMNTNC_OP_W_MASK |
+                (phy_address << FXMAC_PHYMNTNC_PHAD_SHFT_MSK) |
+                (register_num << FXMAC_PHYMNTNC_PREG_SHFT_MSK) | (u32)phy_data;
+
+        /* Write mgtcr and wait for completion */
+        FXMAC_WRITEREG32(instance_p->config.base_address,
+                         FXMAC_PHYMNTNC_OFFSET, mgtcr);
+
+        do
+        {
+            ipisr = FXMAC_READREG32(instance_p->config.base_address,
+                                    FXMAC_NWSR_OFFSET);
+            ip_write_temp = ipisr;
+        }
+        while ((ip_write_temp & FXMAC_NWSR_MDIOIDLE_MASK) == 0x00000000U);
+
+        status = (FError)(FT_SUCCESS);
+    }
+    return status;
+}
+
+/**
+ * Read the current value of the PHY register indicated by the phy_address and
+ * the register_num parameters. The MAC provides the driver with the ability to
+ * talk to a PHY that adheres to the Media Independent Interface (MII) as
+ * defined in the IEEE 802.3 standard.
+ *
+ *
+ * @param instance_p is a pointer to the FXmac instance to be worked on.
+ * @param phy_address is the address of the PHY to be read (supports multiple
+ *        PHYs)
+ * @param register_num is the register number, 0-31, of the specific PHY register
+ *        to read
+ * @param phydat_aptr is an output parameter, and points to a 16-bit buffer into
+ *        which the current value of the register will be copied.
+ *
+ * @return
+ *
+ * - FT_SUCCESS if the PHY was read from successfully
+ * - FXMAC_ERR_PHY_BUSY if there is another PHY operation in progress
+ *
+ * @note
+ *
+ * This function is not thread-safe. The user must provide mutually exclusive
+ * access to this function if there are to be multiple threads that can call it.
+ *
+ * There is the possibility that this function will not return if the hardware
+ * is broken (i.e., it never sets the status bit indicating that the read is
+ * done). If this is of concern to the user, the user should provide a mechanism
+ * suitable to their needs for recovery.
+ *
+ * For the duration of this function, all host interface reads and writes are
+ * blocked to the current FXmac instance.
+ *
+ ******************************************************************************/
+FError FXmacPhyRead(FXmac *instance_p, u32 phy_address,
+                    u32 register_num, u16 *phydat_aptr)
+{
+    u32 mgtcr;
+    volatile u32 ipisr;
+    u32 IpReadTemp;
+    FError status;
+
+    FASSERT(instance_p != NULL);
+
+    /* Make sure no other PHY operation is currently in progress */
+    if ((!(FXMAC_READREG32(instance_p->config.base_address,
+                           FXMAC_NWSR_OFFSET) &
+           FXMAC_NWSR_MDIOIDLE_MASK)) == TRUE)
+    {
+        status = (FError)(FXMAC_ERR_PHY_BUSY);
+    }
+    else
+    {
+        /* Construct mgtcr mask for the operation */
+        mgtcr = FXMAC_PHYMNTNC_OP_MASK | FXMAC_PHYMNTNC_OP_R_MASK |
+                (phy_address << FXMAC_PHYMNTNC_PHAD_SHFT_MSK) |
+                (register_num << FXMAC_PHYMNTNC_PREG_SHFT_MSK);
+
+        /* Write mgtcr and wait for completion */
+        FXMAC_WRITEREG32(instance_p->config.base_address,
+                         FXMAC_PHYMNTNC_OFFSET, mgtcr);
+
+        do
+        {
+            ipisr = FXMAC_READREG32(instance_p->config.base_address,
+                                    FXMAC_NWSR_OFFSET);
+            IpReadTemp = ipisr;
+        }
+        while ((IpReadTemp & FXMAC_NWSR_MDIOIDLE_MASK) == 0x00000000U);
+
+        /* Read data */
+        *phydat_aptr = (u16)FXMAC_READREG32(instance_p->config.base_address,
+                                            FXMAC_PHYMNTNC_OFFSET);
+        status = (FError)(FT_SUCCESS);
+    }
+    return status;
+}
 
 static FError FXmacDetect(FXmac *instance_p, u32 *phy_addr_p)
 {
@@ -330,7 +487,7 @@ static FError FXmacConfigureIeeePhySpeed(FXmac *instance_p, u32 phy_addr, u32 sp
  * @param {u32} reset_flag is a flag which indicates whether to reset xmac phy.
  * @return {FError}
  */
-FError FXmacPhyInit(FXmac *instance_p, u32 speed, u32 duplex_mode, u32 autonegotiation_en,u32 reset_flag)
+FError FXmacPhyInit(FXmac *instance_p, u32 speed, u32 duplex_mode, u32 autonegotiation_en, u32 reset_flag)
 {
     FError ret;
     u32 phy_addr;

drivers/eth/fxmac/fxmac_phy.h

@@ -25,6 +25,10 @@
 #ifndef FXMAC_PHY_H
 #define FXMAC_PHY_H
 
+#include "ftypes.h"
+#include "ferror_code.h"
+#include "fxmac.h"
+
 #ifdef __cplusplus
 extern "C"
 {
@@ -33,6 +37,23 @@ extern "C"
 #define XMAC_PHY_RESET_ENABLE  1
 #define XMAC_PHY_RESET_DISABLE 0
 
+enum
+{
+    FXMAC_PHY_AUTONEGOTIATION_DISABLE = 0,
+    FXMAC_PHY_AUTONEGOTIATION_ENABLE
+};
+
+enum
+{
+    FXMAC_PHY_MODE_HALFDUPLEX = 0,
+    FXMAC_PHY_MODE_FULLDUPLEX
+};
+
+/* phy interface */
+FError FXmacPhyWrite(FXmac *instance_p, u32 phy_address, u32 register_num, u16 phy_data);
+FError FXmacPhyRead(FXmac *instance_p, u32 phy_address, u32 register_num, u16 *phydat_aptr);
+FError FXmacPhyInit(FXmac *instance_p, u32 speed, u32 duplex_mode, u32 autonegotiation_en, u32 reset_flag);
+
 #ifdef __cplusplus
 }
 #endif

drivers/eth/fxmac/phy/eth_ieee_reg.h

@@ -27,6 +27,7 @@
 
 /***************************** Include Files *********************************/
 #include "ferror_code.h"
+#include "fxmac.h"
 
 #ifdef __cplusplus
 extern "C"
@@ -54,6 +55,7 @@ extern "C"
 #define PHY_CONTROL_LINKSPEED_100M 0x2000
 #define PHY_CONTROL_LINKSPEED_10M 0x0000
 #define PHY_CONTROL_RESET_MASK 0x8000
+#define PHY_CONTROL_LOOPBACK_MASK 0x4000
 
 #define PHY_CONTROL_AUTONEGOTIATE_ENABLE 0x1000
 #define PHY_CONTROL_AUTONEGOTIATE_RESTART 0x0200
@@ -91,8 +93,8 @@ extern "C"
 
 /**************************** Type Definitions *******************************/
 
-typedef FError(*EthPhyWrite)(void *instance_p, u32 phy_address, u32 phy_reg_offset, u16 phy_data);
-typedef FError(*EthPhyRead)(void *instance_p, u32 phy_address, u32 phy_reg_offset, u16 *phy_data_p);
+typedef FError(*EthPhyWrite)(FXmac *instance_p, u32 phy_address, u32 phy_reg_offset, u16 phy_data);
+typedef FError(*EthPhyRead)(FXmac *instance_p, u32 phy_address, u32 phy_reg_offset, u16 *phy_data_p);
 
 /************************** Variable Definitions *****************************/
 

drivers/eth/fxmac/phy/yt/phy_yt.c

@@ -31,9 +31,6 @@
 #define PHY_YT_DEBUG(format, ...) FT_DEBUG_PRINT_D(PHY_YT_DEBUG_TAG, format, ##__VA_ARGS__)
 #define PHY_YT_WARN(format, ...) FT_DEBUG_PRINT_W(PHY_YT_DEBUG_TAG, format, ##__VA_ARGS__)
 
-#define PHY_YT_REG0_LOOPBACK 0x4000
-
-
 FError PhyYtCheckConnectStatus(void *instance_p, u32 phy_addr, EthPhyWrite write_p, EthPhyRead read_p)
 {
     u16 phy_reg0 = 0;
@@ -74,7 +71,7 @@ FError PhyYtSetLoopBack(void *instance_p, u32 phy_addr, EthPhyWrite write_p, Eth
     /*
      * Enable loopback
      */
-    phy_reg0 |= PHY_YT_REG0_LOOPBACK;
+    phy_reg0 |= PHY_CONTROL_LOOPBACK_MASK;
     status = write_p(instance_p, phy_addr, 0, phy_reg0);
 
     status = read_p(instance_p, phy_addr, 0, &phy_reg0);

drivers/eth/src.mk

@@ -25,5 +25,10 @@ DRIVERS_CSRCS += \
     fxmac_options.c\
     fxmac_phy.c\
     fxmac_sinit.c
+
+ifdef CONFIG_FXMAC_PHY_YT
+    DRIVERS_CSRCS += phy/yt/phy_yt.c
+endif
+
 endif
 

drivers/i2c/fi2c/fi2c.c

@@ -48,15 +48,6 @@
 static FError FI2cReset(FI2c *instance_p);
 
 /************************** Variable Definitions *****************************/
-static const char *FI2C_ERROR_CODE_MSG[FI2C_NUM_OF_ERR_CODE] =
-{
-    "FI2C_SUCCESS : fi2c success",
-    "FI2C_ERR_INVAL_PARM : fi2c invalid input parameters",
-    "FI2C_ERR_NOT_READY : fi2c driver is not ready",
-    "FI2C_ERR_TIMEOUT : fi2c wait timeout",
-    "FI2C_ERR_NOT_SUPPORT : fi2c not support operation",
-    "FI2C_ERR_INVAL_STATE : fi2c invalid state"
-};
 
 /**
  * @name: FI2cCfgInitialize
@@ -170,27 +161,3 @@ static FError FI2cReset(FI2c *instance_p)
 
     return ret;
 }
-
-/**
- * @name: FI2cErrorToMessage
- * @msg: 获取I2C模块错误码对应的错误信息
- * @return {const char *}, 错误码信息，NULL表示失败
- * @param {FError} error, I2C输入错误码
- */
-const char *FI2cErrorToMessage(FError error)
-{
-    const char *msg = NULL;
-    if (FI2C_SUCCESS != error && ((FI2C_ERR_CODE_PREFIX != error) & (FT_ERRCODE_SYS_MODULE_MASK | FT_ERRCODE_SUB_MODULE_MASK)))
-    {
-        /* if input error do not belong to this module */
-        return msg;
-    }
-    u32 index = error & FT_ERRCODE_TAIL_VALUE_MASK;
-
-    if (index < FI2C_NUM_OF_ERR_CODE)
-    {
-        msg = FI2C_ERROR_CODE_MSG[index];
-    }
-
-    return msg;
-}

drivers/i2c/fi2c/fi2c.h

@@ -50,8 +50,6 @@ extern "C"
 
 /* add up new error code above and plust FI2C_ERR_CODE_MAX by ONE*/
 #define FI2C_ERR_CODE_MAX     FT_MAKE_ERRCODE(ErrModBsp, ErrBspI2c, 7)
-#define FI2C_ERR_CODE_PREFIX  FI2C_ERR_CODE_MAX & (FT_ERRCODE_SYS_MODULE_MASK | FT_ERRCODE_SUB_MODULE_MASK)
-#define FI2C_NUM_OF_ERR_CODE  FI2C_ERR_CODE_MAX & FT_ERRCODE_TAIL_VALUE_MASK
 
 /*
  * status codes
@@ -162,9 +160,6 @@ FError FI2cCfgInitialize(FI2c *instance_p, const FI2cConfig *cofig_p);
 /* 完成I2C驱动实例去使能，清零实例数据 */
 void FI2cDeInitialize(FI2c *instance_p);
 
-/* 获取I2C模块错误码对应的错误信息 */
-const char *FI2cErrorToMessage(FError error);
-
 /* fi2c_master.c */
 /* I2C主机读，阻塞直到完成读操作或失败 */
 FError FI2cMasterReadPoll(FI2c *instance_p, u32 mem_addr, u8 mem_byte_len, u8 *buf_p, u32 buf_len);

drivers/i2c/fi2c/fi2c_hw.c

@@ -404,14 +404,13 @@ FError FI2cSetSar(uintptr addr, u32 sar_addr)
  */
 FError FI2cFlushRxFifo(uintptr addr)
 {
-    u8 data;
     int timeout = 0;
     FError ret = FI2C_SUCCESS;
 
     /* read data to trigger trans until fifo empty */
     while (FI2C_GET_STATUS(addr) & FI2C_STATUS_RFNE)
     {
-        data = FI2C_READ_DATA(addr);
+        (void)FI2C_READ_DATA(addr);
 
         if (FI2C_TIMEOUT < ++timeout)
         {
@@ -489,7 +488,6 @@ u32 FI2cClearIntrBits(uintptr addr, u32 *last_err_p)
 
 void FI2cClearAbort(uintptr addr)
 {
-    u32 reg_val;
     u32 timeout = FI2C_TIMEOUT;
 
     do

drivers/i2c/fi2c/fi2c_master.c

@@ -114,7 +114,6 @@ static FError FI2cMasterStopTrans(FI2c *instance_p)
     FASSERT(instance_p);
     FError ret = FI2C_SUCCESS;
     uintptr base_addr = instance_p->config.base_addr;
-    u32 reg_val = 0;
     u32 timeout = 0;
 
     FI2C_INFO("GET MASTER STOP, stat: 0x%x, 0x%x", FI2C_READ_INTR_STAT(base_addr),
@@ -124,7 +123,7 @@ static FError FI2cMasterStopTrans(FI2c *instance_p)
     {
         if (FI2C_READ_RAW_INTR_STAT(base_addr) & FI2C_INTR_STOP_DET)
         {
-            reg_val = FI2C_READ_REG32(base_addr, FI2C_CLR_STOP_DET_OFFSET); /* read to clr intr status */
+            (void)FI2C_READ_REG32(base_addr, FI2C_CLR_STOP_DET_OFFSET); /* read to clr intr status */
             break;
         }
         else if (FI2C_TIMEOUT < ++timeout)

drivers/i2s/fes8336/fes8336.c

@@ -39,10 +39,8 @@
 /*i2s slave address*/
 #define ES8336_ADDR 0x10
 
-static FIOPadCtrl iopad_ctrl;
-
 /*es8336 register default value*/
-static const struct  reg_default es8336_reg_defaults[] =
+_UNUSED static const struct  reg_default es8336_reg_defaults[] =
 {
     {0x00, 0x03}, {0x01, 0x03}, {0x02, 0x00}, {0x03, 0x20},
     {0x04, 0x11}, {0x05, 0x00}, {0x06, 0x11}, {0x07, 0x00},
@@ -427,6 +425,7 @@ FError FEs8336SetBiasLevel(FEs8336BiasLevel level)
             FEs8336WriteByte(ES8336_SYS_LP1_REG0E, 0x3F);
             FEs8336WriteByte(ES8336_SYS_LP2_REG0F, 0x1F);
             FEs8336WriteByte(ES8336_RESET_REG00, 0x00);
+        default:
             break;
     }
     return ret;

drivers/i2s/fes8388/fes8388.c

@@ -33,7 +33,6 @@
 #include "fi2c_hw.h"
 #include "fes8388.h"
 
-static FIOPadCtrl iopad_ctrl;
 static FI2c master_i2c_instance;
 
 

drivers/iomux/fioctrl/fioctrl.c

@@ -45,12 +45,12 @@
 #define FIOCTRL_INFO(format, ...)  FT_DEBUG_PRINT_I(FIOCTRL_DEBUG_TAG, format, ##__VA_ARGS__)
 #define FIOCTRL_DEBUG(format, ...) FT_DEBUG_PRINT_D(FIOCTRL_DEBUG_TAG, format, ##__VA_ARGS__)
 
-#define FIOCTRL_ASSERT_REG_OFF(pin) FASSERT_MSG(((pin.reg_off >= FIOCTRL_REG_OFFSET_MIN) && (pin.reg_off <= FIOCTRL_REG_OFFSET_MAX)), "invalid pin register off @%d", (pin.reg_off))
-#define FIOCTRL_ASSERT_FUNC(func) FASSERT_MSG((func < FIOCTRL_NUM_OF_FUNC), "invalid func as %d", (func))
-#define FIOCTRL_ASSERT_PULL(pull) FASSERT_MSG((pull < FIOCTRL_NUM_OF_PULL), "invalid pull as %d", (pull))
+#define FIOCTRL_ASSERT_REG_OFF(pin) FASSERT_MSG(((pin.reg_off >= FIOCTRL_REG_OFFSET_MIN) && (pin.reg_off <= FIOCTRL_REG_OFFSET_MAX)), "invalid pin register off @%d", (unsigned int)(pin.reg_off))
+#define FIOCTRL_ASSERT_FUNC(func) FASSERT_MSG((func < FIOCTRL_NUM_OF_FUNC), "invalid func as %d", (unsigned int)(func))
+#define FIOCTRL_ASSERT_PULL(pull) FASSERT_MSG((pull < FIOCTRL_NUM_OF_PULL), "invalid pull as %d", (unsigned int)(pull))
 
-#define FIOCTRL_ASSERT_DELAY_REG_OFF(pin) FASSERT_MSG(((pin.reg_off >= FIOCTRL_DELAY_REG_OFFSET_MIN) && (pin.reg_off <= FIOCTRL_DELAY_REG_OFFSET_MAX)), "invalid delay pin register off @%d", (pin.reg_off))
-#define FIOCTRL_ASSERT_DELAY(delay) FASSERT_MSG(((delay) < FIOCTRL_NUM_OF_DELAY), "invalid delay as %d", (delay));
+#define FIOCTRL_ASSERT_DELAY_REG_OFF(pin) FASSERT_MSG(((pin.reg_off >= FIOCTRL_DELAY_REG_OFFSET_MIN) && (pin.reg_off <= FIOCTRL_DELAY_REG_OFFSET_MAX)), "invalid delay pin register off @%d", (unsigned int)(pin.reg_off))
+#define FIOCTRL_ASSERT_DELAY(delay) FASSERT_MSG(((delay) < FIOCTRL_NUM_OF_DELAY), "invalid delay as %d", (unsigned int)(delay));
 
 /************************** Function Prototypes ******************************/
 

drivers/media/fdcdp_lib/inc/fdc_hw.h

@@ -147,8 +147,8 @@ DC Ctrl Register*/
 /* FDC_GCREG_CURSOR_CONFIG */
 #define FDC_GCREG_CURSOR_CONFIG_HOT_SPOT_X_SET(x) SET_REG32_BITS((x), 20, 16) /* horizontal offset to the cursor hotspot */
 #define FDC_GCREG_CURSOR_CONFIG_HOT_SPOT_Y_SET(x) SET_REG32_BITS((x), 12, 8)  /* vertical offset to the cursor hotspot */
-#define FDC_GCREG_CURSOR_CONFIG_HOT_FORMAT_SET(x) SET_REG32_BITS((x), 1, 0)   /* format of the cursor,0: disabled, 1:masked, 2:ARGB888   \
-                                                                                                                                       \ \
+#define FDC_GCREG_CURSOR_CONFIG_HOT_FORMAT_SET(x) SET_REG32_BITS((x), 1, 0)   /* format of the cursor,0: disabled, 1:masked, 2:ARGB888 */
+                                                                                                                                      
 /* FDC_GCREG_CURSOR_LOCATION */
 #define FDC_GCREG_CURSOR_LOCATION_Y_SET(x) SET_REG32_BITS((x), 31, 16)        /* Y location of cursor hotspot */
 #define FDC_GCREG_CURSOR_LOCATION_X_SET(x) SET_REG32_BITS((x), 15, 0)         /* X location of cursor hotspot */

drivers/mmc/fsdmmc/fsdmmc_intr.c

@@ -67,7 +67,7 @@ extern FError FSdmmcSendData(uintptr base_addr, boolean read, FSdmmcCmd *cmd_p);
  */
 u32 FSdmmcGetInterruptMask(uintptr base_addr, u32 intr_type)
 {
-    u32 mask;
+    u32 mask = 0;
 
     switch (intr_type)
     {

drivers/pcie/fpcie_ecam/fpcie_ecam.c

@@ -734,7 +734,7 @@ FError FPcieEcamSkipType0(FPcieEcam *instance_p,u8 bus,u8 device,u8 function)
             }
 
         }
-        pos + 1 ;
+        pos ++;
     }
 
     return FT_SUCCESS;
@@ -906,7 +906,6 @@ FError FPcieEcamEnumerateBus(FPcieEcam *instance_p,u8 bus)
 FError FPcieEcamCfgInitialize(FPcieEcam *instance_p, FPcieEcamConfig *config_p,FPcieEcamNeedSkip need_skip_fun) //用于从全局配置数据中获取数据，初始化instance_p
 {
     struct FPcieRegion mem_region = {0} ;
-    struct FPcieRegion prefetch_region = {0} ;
     struct FPcieRegion io_region = {0} ;
 
     /* Assert arguments */
@@ -924,12 +923,6 @@ FError FPcieEcamCfgInitialize(FPcieEcam *instance_p, FPcieEcamConfig *config_p,F
     mem_region.size = instance_p->config.npmem_size ;
     mem_region.flags = FPCIE_REGION_MEM ;
 
-    /* mem64 地址 */          
-    prefetch_region.phys_start = instance_p->config.pmem_base_addr ;
-    prefetch_region.bus_start = instance_p->config.pmem_base_addr ;
-    prefetch_region.size  = instance_p->config.pmem_size ;
-    prefetch_region.flags = (PCI_REGION_PREFETCH | FPCIE_REGION_MEM);
-
     /* memio 地址 */          
     io_region.phys_start = instance_p->config.io_base_addr ;
     io_region.bus_start = instance_p->config.io_base_addr ;
@@ -943,9 +936,19 @@ FError FPcieEcamCfgInitialize(FPcieEcam *instance_p, FPcieEcamConfig *config_p,F
     instance_p->need_skip_fun = need_skip_fun ;
 
     FPcieRegionConfigInit(instance_p, &mem_region, 1) ;
+
 #if defined(FAARCH64_USE)
+    struct FPcieRegion prefetch_region = {0} ;
+
+    /* mem64 地址 */          
+    prefetch_region.phys_start = instance_p->config.pmem_base_addr ;
+    prefetch_region.bus_start = instance_p->config.pmem_base_addr ;
+    prefetch_region.size  = instance_p->config.pmem_size ;
+    prefetch_region.flags = (PCI_REGION_PREFETCH | FPCIE_REGION_MEM);
+
     FPcieRegionConfigInit(instance_p, &prefetch_region, 1) ;
 #endif
+
     FPcieRegionConfigInit(instance_p, &io_region, 1) ;
 
     instance_p->is_ready = FT_COMPONENT_IS_READY;

drivers/pwm/fpwm/fpwm.c

@@ -178,7 +178,7 @@ static void FPwmTimInterruptEnable(FPwmCtrl *pctrl, u32 channel)
  * @param {u32} channel, pwm module's channel, 0/1
  * @return
  */
-static void FPwmTimInterruptDisable(FPwmCtrl *pctrl, u32 channel)
+_UNUSED static void FPwmTimInterruptDisable(FPwmCtrl *pctrl, u32 channel)
 {
     FASSERT(pctrl != NULL);
     u32 reg_val = 0;
@@ -426,11 +426,8 @@ static void FPwmDbFallCycleSet(FPwmCtrl *pctrl, u16 fall_edge_delay)
     FASSERT(pctrl != NULL);
     FASSERT(fall_edge_delay < FPWM_DB_DLY_MAX);
     u32 reg_val = 0;
-    uintptr pwm_base_addr = pctrl->config.pwm_base_addr;
     uintptr db_base_addr = pctrl->config.db_base_addr;
 
-    u32 pwm_period = FPWM_READ_REG32(pwm_base_addr, FPWM_PERIOD_OFFSET);
-
     reg_val = FPWM_READ_REG32(db_base_addr, FPWM_DB_DLY_OFFSET);
     reg_val &= (~FPWM_DB_DLY_FALL_MASK);
     reg_val |= FPWM_DB_DLY_FALL(fall_edge_delay);
@@ -449,11 +446,8 @@ static void FPwmDbRiseCycleSet(FPwmCtrl *pctrl, u16 rise_edge_delay)
     FASSERT(pctrl != NULL);
     FASSERT(rise_edge_delay < FPWM_DB_DLY_MAX);
     u32 reg_val = 0;
-    uintptr pwm_base_addr = pctrl->config.pwm_base_addr;
     uintptr db_base_addr = pctrl->config.db_base_addr;
 
-    u32 pwm_period = FPWM_READ_REG32(pwm_base_addr, FPWM_PERIOD_OFFSET);
-
     reg_val = FPWM_READ_REG32(db_base_addr, FPWM_DB_DLY_OFFSET);
     reg_val &= (~FPWM_DB_DLY_RISE_MASK);
     reg_val |= (u32)(rise_edge_delay & FPWM_DB_DLY_RISE_MASK);

drivers/qspi/fqspi/fqspi_flash.c

@@ -123,7 +123,7 @@ FError FQspiFlashDetect(FQspiCtrl *pctrl)
  * @param {FQspiCtrl} *pctrl, instance of FQSPI controller
  * @return {FError} err code information, FQSPI_SUCCESS indicates success，others indicates failed
  */
-static FError FQspiFlashReset(FQspiCtrl *pctrl)
+_UNUSED static FError FQspiFlashReset(FQspiCtrl *pctrl)
 {
     FASSERT(pctrl);
     FError ret = FQSPI_SUCCESS;

drivers/scmi/fscmi_mhu/fscmi.c

@@ -47,7 +47,6 @@ FError FScmiDoTransport(FScmi *instance_p,struct FScmiTransferInfo *info, u32 pr
 {
     FError ret;
     u32 tx_done = 0;
-    u32 chan_status = 0;
     u32 delay_out = 0;
     FMhuConfig *mhu_config = &instance_p->scmi_mhu.mhu.config;
 
@@ -63,7 +62,6 @@ FError FScmiDoTransport(FScmi *instance_p,struct FScmiTransferInfo *info, u32 pr
     {
         instance_p->scmi_mhu.send_data(mhu_config->base_addr,mhu_config->mhu_chan_id);
     }
-    chan_status = FMhuGetChanStatus(mhu_config->base_addr);
     /* 等待发送完成 */
     while (tx_done == 0)
     {   

drivers/scmi/fscmi_mhu/fscmi_perf.c

@@ -157,12 +157,12 @@ static FError FScmiPerfDomainAttributesGet(FScmi *instance_p, u32 domain, struct
         dom_info->mult_factor =
                 (dom_info->sustained_freq_khz * 1000) /
                 dom_info->sustained_perf_level;
-    strlcpy(dom_info->name, attr->name, FSCMI_MAX_STR_SIZE);
+    strlcpy(dom_info->name, (char *)attr->name, FSCMI_MAX_STR_SIZE);
     
     return FT_SUCCESS;
 }
 
-static int opp_cmp_func(const void *opp1, const void *opp2)
+_UNUSED static int opp_cmp_func(const void *opp1, const void *opp2)
 {
 	const struct FScmiOpp *t1 = opp1, *t2 = opp2;
 
@@ -241,7 +241,7 @@ static FError FScmiPerfDescribeLevelsGet(FScmi *instance_p, u32 domain, struct F
     return FT_SUCCESS;
 }
 
-static FError FScmiPerfLimitsSet(FScmi *instance_p, u32 domain, u32 max_perf, u32 min_perf)
+_UNUSED static FError FScmiPerfLimitsSet(FScmi *instance_p, u32 domain, u32 max_perf, u32 min_perf)
 {
     FASSERT(instance_p != NULL);
     FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY);
@@ -283,7 +283,7 @@ static FError FScmiPerfLimitsSet(FScmi *instance_p, u32 domain, u32 max_perf, u3
     return FT_SUCCESS;
 }
 
-static FError FScmiPerfLimitsGet(FScmi *instance_p, u32 domain, u32 *max_perf, u32 *min_perf)
+_UNUSED static FError FScmiPerfLimitsGet(FScmi *instance_p, u32 domain, u32 *max_perf, u32 *min_perf)
 {
     FASSERT(instance_p != NULL);
     FASSERT(max_perf != NULL);

drivers/scmi/fscmi_mhu/fscmi_sensors.c

@@ -162,7 +162,7 @@ static FError FScmiSensorDescriptionGet(FScmi *instance_p,struct FScmiSensorsInf
 			s = &si->sensor_info[desc_index + cnt];
 			s->id = (u32)(buf->desc[cnt].id);
 			s->type = SENSOR_TYPE(attrh);
-			strlcpy(s->name, buf->desc[cnt].name, FSCMI_MAX_STR_SIZE);
+			strlcpy(s->name, (char *)buf->desc[cnt].name, FSCMI_MAX_STR_SIZE);
             FSCMI_SENSOR_INFO("DescriptionGet:id:%d,type:%d,name:%s.\n",s->id,s->type,s->name);
         }
 
@@ -175,7 +175,7 @@ static FError FScmiSensorDescriptionGet(FScmi *instance_p,struct FScmiSensorsInf
 	return ret;
 }
 
-static int FScmiSensorsTripPointSet(FScmi *instance_p,u32 sensor_id, u8 trip_id, u64 trip_value)
+_UNUSED static int FScmiSensorsTripPointSet(FScmi *instance_p,u32 sensor_id, u8 trip_id, u64 trip_value)
 {
     FError ret;
     u32 evt_cntl = SENSOR_TP_BOTH;
@@ -212,7 +212,7 @@ static int FScmiSensorsTripPointSet(FScmi *instance_p,u32 sensor_id, u8 trip_id,
     
     return FT_SUCCESS;
 }
-static FError FScmiSensorsConfigurationSet(FScmi *instance_p,u32 sensor_id)
+_UNUSED static FError FScmiSensorsConfigurationSet(FScmi *instance_p,u32 sensor_id)
 {
     FError ret;
     u32 evt_cntl = BIT(0);
@@ -324,7 +324,6 @@ FError FScmiSensorGetTemp(FScmi *instance_p, u32 sensor_id,s64 *temp)
  */
 FError FScmiSensorInit(FScmi *instance_p)
 {
-	u32 version;
     struct FScmiSensorsInfo *sinfo;
     sinfo = &instance_p->sensors;
     

drivers/spi/fspim/fspim.c

@@ -26,7 +26,6 @@
  * 1.4   huangjin   2023/12/26  adaptive pd2308
  */
 
-
 /***************************** Include Files *********************************/
 
 #include <string.h>
@@ -51,19 +50,6 @@
 /************************** Function Prototypes ******************************/
 FError FSpimReset(FSpim *instance_p);
 
-/************************** Variable Definitions *****************************/
-static const char *FSPIM_ERROR_CODE_MSG[FSPIM_NUM_OF_ERR_CODE] =
-{
-    "FSPIM_SUCCESS : The fspim was successful",
-    "FSPIM_ERR_INVAL_STATE : The fspim invalid state",
-    "FSPIM_ERR_NOT_READY : The fspim driver is not ready",
-    "FSPIM_ERR_INVAL_PARAM : The fspim input parameter is invalid",
-    "FSPIM_ERR_BUS_BUSY : The fspim bus is busy",
-    "FSPIM_ERR_NOT_SUPPORT : Operations are not supported by fspim",
-    "FSPIM_ERR_TIMEOUT : The fspim waits for a timeout",
-    "FSPIM_ERR_TRANS_FAIL : The fspim data transmission failed",
-};
-
 
 /*****************************************************************************/
 
@@ -181,42 +167,29 @@ FError FSpimReset(FSpim *instance_p)
     if (0 == instance_p->tx_fifo_len)
     {
         fifo = FSpimGetTxFifoDepth(base_addr); /* 检测fifo深度 */
-        instance_p->tx_fifo_len = ((fifo == 1) ? 0 : fifo);
+        instance_p->tx_fifo_len = fifo;
         FSPIM_INFO("The fifo depth is %d ,tx effective length bits %d", fifo, instance_p->tx_fifo_len);
     }
 
     if (0 == instance_p->rx_fifo_len)
     {
         fifo = FSpimGetRxFifoDepth(base_addr);
-        instance_p->rx_fifo_len = ((fifo == 1) ? 0 : fifo);
+        instance_p->rx_fifo_len = fifo;
         FSPIM_INFO("The fifo depth is %d ,rx effective length bits %d", fifo, instance_p->rx_fifo_len);
     }
 
     FSPIM_WRITE_REG32(base_addr, FSPIM_DMA_CR_OFFSET, 0x0); /* disable ddma */
 
-    if (instance_p->config.en_dma)
+    if(instance_p->config.trans_way == TRANS_WAY_DDMA)
     {
-        /* recv data in continuous way */
-        FSpimSetCtrlR1(base_addr, FSPIM_CTRL_R1_NDF_64KB);
-
-        /* setup fifo threshold */
-        FSpimSetRxFifoThreshold(base_addr, instance_p->rx_fifo_len);
-        FSpimSetTxFifoThreshold(base_addr, instance_p->tx_fifo_len);
-
-        /* setup fifo DMA level to trigger interrupt */
-        FSpimSetRxDMALevel(base_addr, FSPIM_RX_DMA_LEVEL);
-        FSpimSetTxDMALevel(base_addr, FSPIM_TX_DMA_LEVEL);
-    }
-    else
-    {
-        FSpimSetCtrlR1(base_addr, 0);
-
-        FSpimSetRxFifoThreshold(base_addr, 0);
-        FSpimSetTxFifoThreshold(base_addr, 0);
-        FSpimSetRxDMALevel(base_addr, 0);
-        FSpimSetTxDMALevel(base_addr, 0);
+        instance_p->config.en_dma = TRUE;
     }
 
+    FSpimSetCtrlR1(base_addr, 0);
+    FSpimSetRxFifoThreshold(base_addr, instance_p->config.rx_fifo_threshold);
+    FSpimSetTxFifoThreshold(base_addr, instance_p->config.tx_fifo_threshold);
+    FSpimSetRxDMALevel(base_addr, instance_p->config.rx_dma_level);
+    FSpimSetTxDMALevel(base_addr, instance_p->config.tx_dma_level);
 
     ret = FSpimSetSpeed(base_addr, instance_p->config.freq_hz);
     if (FSPIM_SUCCESS != ret)
@@ -224,7 +197,7 @@ FError FSpimReset(FSpim *instance_p)
         return ret;
     }
 
-    FSPIM_WRITE_REG32(base_addr, FSPIM_RX_SAMPLE_DLY_OFFSET, FSPIM_DEFAULT_RSD);
+    FSPIM_WRITE_REG32(base_addr, FSPIM_RX_SAMPLE_DLY_OFFSET, 0);
 
     return ret;
 }
@@ -377,7 +350,8 @@ static fsize_t FSpimGetTxRound(FSpim *instance_p)
                    FSpimGetTxFifoLevel(base_addr);
 
     rx_tx_gap = ((fsize_t)(instance_p->length - instance_p->rx_count) -
-                 (fsize_t)(instance_p->length - instance_p->tx_count)) / data_width;
+                 (fsize_t)(instance_p->length - instance_p->tx_count)) /
+                data_width;
 
     FSPIM_DEBUG("tx_left_round: %d, tx_fifo_room: %d, gap: %d, instance_p->tx_count: %ld",
                 tx_left_round,
@@ -415,7 +389,7 @@ void FSpimFifoTx(FSpim *instance_p)
 
     while (tx_round)
     {
-	    if(instance_p->tx_buff)
+        if (instance_p->tx_buff)
         {
             if (FSPIM_1_BYTE == data_width)
             {
@@ -457,7 +431,7 @@ static fsize_t FSpimGetRxRound(FSpim *instance_p)
 
     fsize_t rx_left_round = (fsize_t)(instance_p->length - instance_p->rx_count) / data_width;
 
-    FSPIM_DEBUG("left round %d, rx level %d,instance_p->rx_count %ld", rx_left_round, FSpimGetRxFifoLevel(base_addr),instance_p->rx_count);
+    FSPIM_DEBUG("left round %d, rx level %d,instance_p->rx_count %ld", rx_left_round, FSpimGetRxFifoLevel(base_addr), instance_p->rx_count);
     return min(rx_left_round, (fsize_t)FSpimGetRxFifoLevel(base_addr));
 }
 
@@ -478,7 +452,7 @@ void FSpimFifoRx(FSpim *instance_p)
     while (rx_round)
     {
         data = FSpimReadData(base_addr);
-	    if(instance_p->rx_buff)
+        if (instance_p->rx_buff)
         {
             if (FSPIM_1_BYTE == data_width)
             {
@@ -534,7 +508,7 @@ FError FSpimTransferPollFifo(FSpim *instance_p, const void *tx_buf, void *rx_buf
         FSPIM_ERROR("The device is not initialized!!!");
         return FSPIM_ERR_NOT_READY;
     }
-    FSPIM_DEBUG("buff address rx= %x, tx=%x\r\n", rx_buf,tx_buf);
+    FSPIM_DEBUG("buff address rx= %x, tx=%x\r\n", rx_buf, tx_buf);
     FSpimSetEnable(base_addr, FALSE);
 
     reg_val = FSpimGetCtrlR0(base_addr);
@@ -569,13 +543,12 @@ FError FSpimTransferPollFifo(FSpim *instance_p, const void *tx_buf, void *rx_buf
                 instance_p->rx_buff, len);
 
     FSpimSetEnable(base_addr, TRUE);
-
     do
     {
         FSpimFifoTx(instance_p);
         FSpimFifoRx(instance_p);
-    }
-    while(instance_p->tx_count < len || instance_p->rx_count < len);
+
+    } while (instance_p->tx_count < len || instance_p->rx_count < len);
     return ret;
 }
 
@@ -632,7 +605,7 @@ FError FSpimTransferByInterrupt(FSpim *instance_p, const void *tx_buf, void *rx_
     instance_p->tx_buff = tx_buf;
     instance_p->rx_buff = rx_buf;
     /* 设置中断触发的时机，fifo填满一半，或者所有的数据填完 */
-    tx_level = min(instance_p->tx_fifo_len / 2, instance_p->length / data_width);
+    tx_level = min(instance_p->tx_fifo_len / 2 + 1, instance_p->length / data_width);
     FSpimSetTxFifoThreshold(base_addr, tx_level);
     FSpimUmaskIrq(base_addr, FSPIM_IMR_TXEIS | FSPIM_IMR_TXOIS | FSPIM_IMR_RXUIS | FSPIM_IMR_RXOIS);
 
@@ -660,7 +633,6 @@ FError FSpimTransferDMA(FSpim *instance_p)
     /* disable ddma */
     FSpimDisenableDdmaChannel(base_addr);
 
-
     if (FT_COMPONENT_IS_READY != instance_p->is_ready)
     {
         FSPIM_ERROR("device is not yet initialized!!!");
@@ -730,27 +702,3 @@ void FSpimSetChipSelection(FSpim *instance_p, boolean on)
 
     return;
 }
-
-/**
- * @name: FSpimErrorToMessage
- * @msg: 获取FSPIM模块错误码对应的错误信息
- * @return {const char *}, 错误码信息，NULL表示失败
- * @param {FError} error, FSPIM输入错误码
- */
-const char *FSpimErrorToMessage(FError error)
-{
-    const char *msg = NULL; 
-    if ((FSPIM_SUCCESS != error) && (FSPIM_ERR_CODE_PREFIX != (error & (FT_ERRCODE_SYS_MODULE_MASK | FT_ERRCODE_SUB_MODULE_MASK))))
-    {
-        /* if input error do not belong to this module */
-        return msg;
-    }
-    u32 index = error & FT_ERRCODE_TAIL_VALUE_MASK;
-
-    if (index < FSPIM_NUM_OF_ERR_CODE)
-    {
-        msg = FSPIM_ERROR_CODE_MSG[index];
-    }
-
-    return msg;
-}

drivers/spi/fspim/fspim.h

@@ -53,8 +53,6 @@ extern "C"
 #define FSPIM_ERR_TRANS_FAIL    FT_MAKE_ERRCODE(ErrModBsp, ErrBspSpi, 6)
 #define FSPIM_ERR_DMA_INIT      FT_MAKE_ERRCODE(ErrModBsp, ErrBspSpi, 6)
 
-/* add up new error code above and plust FSPIM_ERR_CODE_MAX by ONE*/
-#define FSPIM_ERR_CODE_PREFIX  (FSPIM_ERR_TRANS_FAIL & (FT_ERRCODE_SYS_MODULE_MASK | FT_ERRCODE_SUB_MODULE_MASK))
 #define FSPIM_NUM_OF_ERR_CODE  8
 
 typedef enum
@@ -128,6 +126,14 @@ typedef enum
     FSPIM_SLAVE_ID_OPTION, /* 修改config中的slave id，并激活控制器相应片选 */
 } FSpimOption;
  
+
+typedef enum
+{
+    TRANS_WAY_POLL = 0,
+    TRANS_WAY_INTERRUPT,
+    TRANS_WAY_DDMA,
+    TRANS_WAY_END
+} FSpimTransWay;
 /**************************** Type Definitions *******************************/
 
 /**
@@ -148,6 +154,11 @@ typedef struct
     boolean              en_test;      /* Enable test mode */
     boolean              en_dma;       /* Enable DMA */
     u32                  caps;
+    FSpimTransWay        trans_way;    /*transfer way: poll, interrupt, ddma*/
+    u32                  tx_fifo_threshold;
+    u32                  rx_fifo_threshold;
+    u32                  rx_dma_level;
+    u32                  tx_dma_level;
 } FSpimConfig;
 
 typedef void (*FSpimEvtHandler)(void *instance_p, void *param);
@@ -203,9 +214,6 @@ FError FSpimTransferDMA(FSpim *instance_p);
 /* 控制片选信号 */
 void FSpimSetChipSelection(FSpim *instance_p, boolean on);
 
-/* 获取FSPIM模块错误码对应的错误信息 */
-const char *FSpimErrorToMessage(FError error);
-
 /* fspim_intr.c */
 /* 先发送后接收数据 (中断处理)，利用Fifo进行处理  */
 FError FSpimTransferByInterrupt(FSpim *instance_p, const void *tx_buf, void *rx_buf, fsize_t len);

drivers/spi/fspim/fspim_g.c

@@ -55,7 +55,12 @@ const FSpimConfig FSPIM_CONFIG_TBL[FSPI_NUM] =
         .n_bytes      = 1,
         .en_test      = FALSE,
         .en_dma       = FALSE,
-        .caps         = FSPIM0_DMA_CAPACITY
+        .caps         = FSPIM0_DMA_CAPACITY,
+        .tx_fifo_threshold  = 0,
+        .rx_fifo_threshold  = 0,
+        .rx_dma_level       = FSPIM_RX_DMA_LEVEL,
+        .tx_dma_level       = FSPIM_TX_DMA_LEVEL,
+
     },
     [FSPI1_ID] =
     {
@@ -69,7 +74,11 @@ const FSpimConfig FSPIM_CONFIG_TBL[FSPI_NUM] =
         .n_bytes      = 1,
         .en_test      = FALSE,
         .en_dma       = FALSE,
-        .caps         = FSPIM1_DMA_CAPACITY
+        .caps         = FSPIM1_DMA_CAPACITY,
+        .tx_fifo_threshold  = 0,
+        .rx_fifo_threshold  = 0,
+        .rx_dma_level       = FSPIM_RX_DMA_LEVEL,
+        .tx_dma_level       = FSPIM_TX_DMA_LEVEL,
     },
 #if defined(FSPI2_ID)
     [FSPI2_ID] =
@@ -84,7 +93,11 @@ const FSpimConfig FSPIM_CONFIG_TBL[FSPI_NUM] =
         .n_bytes      = 1,
         .en_test      = FALSE,
         .en_dma       = FALSE,
-        .caps         = FSPIM2_DMA_CAPACITY
+        .caps         = FSPIM2_DMA_CAPACITY,
+        .tx_fifo_threshold  = 0,
+        .rx_fifo_threshold  = 0,
+        .rx_dma_level       = FSPIM_RX_DMA_LEVEL,
+        .tx_dma_level       = FSPIM_TX_DMA_LEVEL,
     },
 #endif
 
@@ -101,7 +114,11 @@ const FSpimConfig FSPIM_CONFIG_TBL[FSPI_NUM] =
         .n_bytes      = 1,
         .en_test      = FALSE,
         .en_dma       = FALSE,
-        .caps         = FSPIM3_DMA_CAPACITY
+        .caps         = FSPIM3_DMA_CAPACITY,
+        .tx_fifo_threshold  = 0,
+        .rx_fifo_threshold  = 0,
+        .rx_dma_level       = FSPIM_RX_DMA_LEVEL,
+        .tx_dma_level       = FSPIM_TX_DMA_LEVEL,
     },
 #endif
 };

drivers/spi/fspim/fspim_hw.h

@@ -127,6 +127,8 @@ enum
 #define FSPIM_CTRL_R1_NDF(x)         (GENMASK(15, 0) & ((x) << 0))
 #define FSPIM_CTRL_R1_NDF_64KB       0b11
 
+#define FSPIM_CTRL_R1_NDF_MAX         0x10000
+
 /** @name FSPIM_SSIENR_OFFSET Register
  */
 #define FSPIM_SSIENR_SSI_EN(x)       ((x) << 0) /* SPI 使能启用和禁用所有 SPI 操作 */
@@ -287,8 +289,8 @@ enum
 #define FSPIM_MAX_FIFO_DEPTH           256
 #define FSPIM_TIMEOUT                  256
 
-#define FSPIM_TX_DMA_LEVEL             0x10
-#define FSPIM_RX_DMA_LEVEL             0xf
+#define FSPIM_TX_DMA_LEVEL             0x0
+#define FSPIM_RX_DMA_LEVEL             0x0
 
 #define FSPIM_ONE_BYTE_DATA_MASK       0xff
 #define FSPIM_TWO_BYTE_DATA_MASK       0xffff

example/ai/tinymaix/configs/d2000_aarch32_test_tinymaix.config

@@ -183,9 +183,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/d2000_aarch64_test_tinymaix.config

@@ -177,9 +177,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/e2000d_aarch32_demo_tinymaix.config

@@ -196,9 +196,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/e2000d_aarch64_demo_tinymaix.config

@@ -190,9 +190,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/e2000q_aarch32_demo_tinymaix.config

@@ -195,9 +195,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/e2000q_aarch64_demo_tinymaix.config

@@ -189,9 +189,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/ft2004_aarch32_dsk_tinymaix.config

@@ -183,9 +183,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/ft2004_aarch64_dsk_tinymaix.config

@@ -177,9 +177,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/pd2308_aarch64_demo_tinymaix.config

@@ -186,9 +186,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/phytiumpi_aarch32_firefly_tinymaix.config

@@ -194,9 +194,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/configs/phytiumpi_aarch64_firefly_tinymaix.config

@@ -188,9 +188,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/sdkconfig

@@ -188,9 +188,9 @@ CONFIG_OUTPUT_BINARY=y
 #
 # Optimization options
 #
-# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_NOOPT=y
 # CONFIG_DEBUG_CUSTOMOPT is not set
-CONFIG_DEBUG_FULLOPT=y
+# CONFIG_DEBUG_FULLOPT is not set
 CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y
 CONFIG_DEBUG_LINK_MAP=y
 # CONFIG_CCACHE is not set

example/ai/tinymaix/sdkconfig.h

@@ -173,9 +173,9 @@
 
 /* Optimization options */
 
-/* CONFIG_DEBUG_NOOPT is not set */
+#define CONFIG_DEBUG_NOOPT
 /* CONFIG_DEBUG_CUSTOMOPT is not set */
-#define CONFIG_DEBUG_FULLOPT
+/* CONFIG_DEBUG_FULLOPT is not set */
 #define CONFIG_DEBUG_OPT_UNUSED_SECTIONS
 #define CONFIG_DEBUG_LINK_MAP
 /* CONFIG_CCACHE is not set */

example/media/lvgl_demo_test/configs/e2000d_aarch32_demo_media.config

@@ -211,8 +211,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/configs/e2000d_aarch64_demo_media.config

@@ -205,8 +205,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/configs/e2000q_aarch32_demo_media.config

@@ -210,8 +210,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/configs/e2000q_aarch64_demo_media.config

@@ -204,8 +204,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/configs/phytiumpi_aarch32_firefly_media.config

@@ -209,8 +209,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/configs/phytiumpi_aarch64_firefly_media.config

@@ -203,8 +203,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/sdkconfig

@@ -203,8 +203,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/lvgl_demo_test/sdkconfig.h

@@ -184,8 +184,8 @@
 
 /* Debug options */
 
-/* CONFIG_DEBUG_ENABLE_ALL_WARNING is not set */
-/* CONFIG_WALL_WARNING_ERROR is not set */
+#define CONFIG_DEBUG_ENABLE_ALL_WARNING
+#define CONFIG_WALL_WARNING_ERROR
 /* CONFIG_STRICT_PROTOTYPES is not set */
 /* CONFIG_DEBUG_SYMBOLS is not set */
 /* CONFIG_FRAME_POINTER is not set */

example/media/lvgl_demo_test/src/lvgl_disp_test.c

@@ -43,7 +43,7 @@
 
 /************************** static definition ******************************/
 static FDcDp dcdp_config;
-static u8 *static_frame_buffer_address = (u8 *)0xa0000000 ;
+static u8 static_frame_buffer_address[1920 * 1080 * 4] __attribute__((aligned(128))) = {0};/*Framebuffer 大小 (字节) = 屏幕宽度 (像素) × 屏幕高度 (像素) × 每像素位数 (bpp) / 8*/
 
 static void FMediaHpdBreakCallback(void *args, u32 index);
 static void FMediaHpdConnectCallback(void *args, u32 index);

example/media/media_test/configs/e2000d_aarch32_demo_media.config

@@ -211,8 +211,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/configs/e2000d_aarch64_demo_media.config

@@ -205,8 +205,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/configs/e2000q_aarch32_demo_media.config

@@ -210,8 +210,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/configs/e2000q_aarch64_demo_media.config

@@ -204,8 +204,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/configs/phytiumpi_aarch32_firefly_media.config

@@ -209,8 +209,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/configs/phytiumpi_aarch64_firefly_media.config

@@ -203,8 +203,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/sdkconfig

@@ -203,8 +203,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/media/media_test/sdkconfig.h

@@ -184,8 +184,8 @@
 
 /* Debug options */
 
-/* CONFIG_DEBUG_ENABLE_ALL_WARNING is not set */
-/* CONFIG_WALL_WARNING_ERROR is not set */
+#define CONFIG_DEBUG_ENABLE_ALL_WARNING
+#define CONFIG_WALL_WARNING_ERROR
 /* CONFIG_STRICT_PROTOTYPES is not set */
 /* CONFIG_DEBUG_SYMBOLS is not set */
 /* CONFIG_FRAME_POINTER is not set */

example/media/media_test/src/media_test_example.c

@@ -42,9 +42,7 @@
 /************************** Variable Definitions *****************************/
 static FDcDp dcdp_config;
 static GraphicsTest blt_buffer;
-
-static u8 *static_frame_buffer_address = (u8 *)0xa0000000 ;
-
+static u8 static_frame_buffer_address[1920 * 1080 * 4] __attribute__((aligned(128))) = {0};/*Framebuffer 大小 (字节) = 屏幕宽度 (像素) × 屏幕高度 (像素) × 每像素位数 (bpp) / 8*/
 static void FMediaHpdBreakCallback(void *args, u32 index);
 static void FMediaHpdConnectCallback(void *args, u32 index);
 static void FMediaAuxTimeoutCallback(void *args, u32 index);
@@ -60,7 +58,6 @@ void FMediaHpdDetect(void)
 {
     FDcDp *instance_p = &dcdp_config;
     u32 ret;
-    u32 mode_id;
     u32 index;
 
     for (index = 0; index < FDCDP_INSTANCE_NUM; index++)
@@ -301,7 +298,6 @@ FError FMediaCtrlProbe(void)
  */
 void FMediaDisplayDemo(void)
 {
-    FDcDp *instance_p = &dcdp_config;
     for (u32 index = 0; index < FDCDP_INSTANCE_NUM; index ++)
     {
         blt_buffer.Red = 0xff;

example/network/lwip_iperf/configs/d2000_aarch32_test_lwip_iperf.config

@@ -402,8 +402,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/d2000_aarch64_test_lwip_iperf.config

@@ -396,8 +396,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/e2000d_aarch32_demo_lwip_iperf.config

@@ -415,8 +415,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/e2000d_aarch64_demo_lwip_iperf.config

@@ -409,8 +409,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/e2000q_aarch32_demo_lwip_iperf.config

@@ -414,8 +414,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/e2000q_aarch64_demo_lwip_iperf.config

@@ -408,8 +408,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/ft2004_aarch32_dsk_lwip_iperf.config

@@ -402,8 +402,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/ft2004_aarch64_dsk_lwip_iperf.config

@@ -396,8 +396,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/phytiumpi_aarch32_firefly_lwip_iperf.config

@@ -413,8 +413,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/configs/phytiumpi_aarch64_firefly_lwip_iperf.config

@@ -407,8 +407,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/sdkconfig

@@ -407,8 +407,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_iperf/sdkconfig.h

@@ -362,8 +362,8 @@
 
 /* Debug options */
 
-/* CONFIG_DEBUG_ENABLE_ALL_WARNING is not set */
-/* CONFIG_WALL_WARNING_ERROR is not set */
+#define CONFIG_DEBUG_ENABLE_ALL_WARNING
+#define CONFIG_WALL_WARNING_ERROR
 /* CONFIG_STRICT_PROTOTYPES is not set */
 /* CONFIG_DEBUG_SYMBOLS is not set */
 /* CONFIG_FRAME_POINTER is not set */

example/network/lwip_jumbo/configs/d2000_aarch32_test_lwip_jumbo.config

@@ -395,8 +395,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/d2000_aarch64_test_lwip_jumbo.config

@@ -389,8 +389,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/e2000d_aarch32_demo_lwip_jumbo.config

@@ -408,8 +408,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/e2000d_aarch64_demo_lwip_jumbo.config

@@ -402,8 +402,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/e2000q_aarch32_demo_lwip_jumbo.config

@@ -407,8 +407,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/e2000q_aarch64_demo_lwip_jumbo.config

@@ -401,8 +401,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/ft2004_aarch32_dsk_lwip_jumbo.config

@@ -395,8 +395,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/ft2004_aarch64_dsk_lwip_jumbo.config

@@ -389,8 +389,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/phytiumpi_aarch32_firefly_lwip_jumbo.config

@@ -406,8 +406,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/configs/phytiumpi_aarch64_firefly_lwip_jumbo.config

@@ -400,8 +400,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/sdkconfig

@@ -400,8 +400,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_jumbo/sdkconfig.h

@@ -355,8 +355,8 @@
 
 /* Debug options */
 
-/* CONFIG_DEBUG_ENABLE_ALL_WARNING is not set */
-/* CONFIG_WALL_WARNING_ERROR is not set */
+#define CONFIG_DEBUG_ENABLE_ALL_WARNING
+#define CONFIG_WALL_WARNING_ERROR
 /* CONFIG_STRICT_PROTOTYPES is not set */
 /* CONFIG_DEBUG_SYMBOLS is not set */
 /* CONFIG_FRAME_POINTER is not set */

example/network/lwip_multicast/configs/d2000_aarch32_test_lwip_multicast.config

@@ -395,8 +395,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/d2000_aarch64_test_lwip_multicast.config

@@ -389,8 +389,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/e2000d_aarch32_demo_lwip_multicast.config

@@ -408,8 +408,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/e2000d_aarch64_demo_lwip_multicast.config

@@ -402,8 +402,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/e2000q_aarch32_demo_lwip_multicast.config

@@ -407,8 +407,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/e2000q_aarch64_demo_lwip_multicast.config

@@ -401,8 +401,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set

example/network/lwip_multicast/configs/ft2004_aarch32_dsk_lwip_multicast.config

@@ -395,8 +395,8 @@ CONFIG_DEBUG_LINK_MAP=y
 #
 # Debug options
 #
-# CONFIG_DEBUG_ENABLE_ALL_WARNING is not set
-# CONFIG_WALL_WARNING_ERROR is not set
+CONFIG_DEBUG_ENABLE_ALL_WARNING=y
+CONFIG_WALL_WARNING_ERROR=y
 # CONFIG_STRICT_PROTOTYPES is not set
 # CONFIG_DEBUG_SYMBOLS is not set
 # CONFIG_FRAME_POINTER is not set