You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

284 lines
10 KiB

/*
* Copyright (c) 2022, sakumisu
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef USBH_CORE_H
#define USBH_CORE_H
#include <stdbool.h>
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
#include "usb_config.h"
#include "usb_util.h"
#include "usb_errno.h"
#include "usb_def.h"
#include "usb_list.h"
#include "usb_log.h"
#include "usb_hc.h"
#include "usb_osal.h"
#include "usbh_hub.h"
#include "usb_memcpy.h"
#ifdef __cplusplus
extern "C" {
#endif
#define USB_CLASS_MATCH_VENDOR 0x0001
#define USB_CLASS_MATCH_PRODUCT 0x0002
#define USB_CLASS_MATCH_INTF_CLASS 0x0004
#define USB_CLASS_MATCH_INTF_SUBCLASS 0x0008
#define USB_CLASS_MATCH_INTF_PROTOCOL 0x0010
#define USB_CLASS_MATCH_VID_PID (USB_CLASS_MATCH_VENDOR | USB_CLASS_MATCH_PRODUCT)
#define CLASS_CONNECT(hport, i) ((hport)->config.intf[i].class_driver->connect(hport, i))
#define CLASS_DISCONNECT(hport, i) ((hport)->config.intf[i].class_driver->disconnect(hport, i))
#ifdef __ARMCC_VERSION /* ARM C Compiler */
#define CLASS_INFO_DEFINE __attribute__((section("usbh_class_info"))) __USED __ALIGNED(1)
#elif defined(__GNUC__)
#define CLASS_INFO_DEFINE __attribute__((section(".usbh_class_info"))) __USED __ALIGNED(1)
#elif defined(__ICCARM__) || defined(__ICCRX__) || defined(__ICCRISCV__)
#pragma section = ".usbh_class_info"
#define CLASS_INFO_DEFINE __attribute__((section(".usbh_class_info"))) __USED __ALIGNED(1)
#endif
#define USBH_GET_URB_INTERVAL(interval, speed) (speed < USB_SPEED_HIGH ? interval : (1 << (interval - 1)))
#define USBH_EP_INIT(ep, ep_desc) \
do { \
ep = ep_desc; \
USB_LOG_INFO("Ep=%02x Attr=%02u Mps=%d Interval=%02u Mult=%02u\r\n", \
ep_desc->bEndpointAddress, \
ep_desc->bmAttributes, \
USB_GET_MAXPACKETSIZE(ep_desc->wMaxPacketSize), \
ep_desc->bInterval, \
USB_GET_MULT(ep_desc->wMaxPacketSize)); \
} while (0)
struct usbh_class_info {
uint8_t match_flags; /* Used for product specific matches; range is inclusive */
uint8_t class; /* Base device class code */
uint8_t subclass; /* Sub-class, depends on base class. Eg. */
uint8_t protocol; /* Protocol, depends on base class. Eg. */
const uint16_t (*id_table)[2]; /* List of Vendor/Product ID pairs */
const struct usbh_class_driver *class_driver;
};
struct usbh_hubport;
struct usbh_class_driver {
const char *driver_name;
int (*connect)(struct usbh_hubport *hport, uint8_t intf);
int (*disconnect)(struct usbh_hubport *hport, uint8_t intf);
};
struct usbh_endpoint {
struct usb_endpoint_descriptor ep_desc;
};
struct usbh_interface_altsetting {
struct usb_interface_descriptor intf_desc;
struct usbh_endpoint ep[CONFIG_USBHOST_MAX_ENDPOINTS];
};
struct usbh_interface {
char devname[CONFIG_USBHOST_DEV_NAMELEN];
struct usbh_class_driver *class_driver;
void *priv;
struct usbh_interface_altsetting altsetting[CONFIG_USBHOST_MAX_INTF_ALTSETTINGS];
uint8_t altsetting_num;
};
struct usbh_configuration {
struct usb_configuration_descriptor config_desc;
struct usbh_interface intf[CONFIG_USBHOST_MAX_INTERFACES];
};
struct usbh_hubport {
bool connected; /* True: device connected; false: disconnected */
uint8_t port; /* Hub port index */
uint8_t dev_addr; /* device address */
uint8_t speed; /* device speed */
uint8_t depth; /* distance from root hub */
uint8_t route; /* route string */
uint8_t slot_id; /* slot id */
struct usb_device_descriptor device_desc;
struct usbh_configuration config;
const char *iManufacturer;
const char *iProduct;
const char *iSerialNumber;
uint8_t *raw_config_desc;
struct usb_setup_packet *setup;
struct usbh_hub *parent;
struct usbh_hub *self; /* if this hubport is a hub */
struct usbh_bus *bus;
struct usb_endpoint_descriptor ep0;
struct usbh_urb ep0_urb;
usb_osal_mutex_t mutex;
};
struct usbh_hub {
bool connected;
bool is_roothub;
uint8_t index;
uint8_t hub_addr;
uint8_t speed;
uint8_t nports;
uint8_t powerdelay;
uint8_t tt_think;
bool ismtt;
struct usb_hub_descriptor hub_desc; /* USB 2.0 only */
struct usb_hub_ss_descriptor hub_ss_desc; /* USB 3.0 only */
struct usbh_hubport child[CONFIG_USBHOST_MAX_EHPORTS];
struct usbh_hubport *parent;
struct usbh_bus *bus;
struct usb_endpoint_descriptor *intin;
struct usbh_urb intin_urb;
uint8_t *int_buffer;
struct usb_osal_timer *int_timer;
};
struct usbh_devaddr_map {
/**
* alloctab[0]:addr from 0~31
* alloctab[1]:addr from 32~63
* alloctab[2]:addr from 64~95
* alloctab[3]:addr from 96~127
*
*/
uint8_t next; /* Next device address */
uint32_t alloctab[4]; /* Bit allocation table */
};
struct usbh_hcd {
uintptr_t reg_base;
uint8_t hcd_id;
uint8_t roothub_intbuf[2]; /* at most 15 roothub ports */
struct usbh_hub roothub;
};
struct usbh_bus {
usb_slist_t list;
uint8_t busid;
struct usbh_hcd hcd;
struct usbh_devaddr_map devgen;
usb_osal_thread_t hub_thread;
usb_osal_mq_t hub_mq;
};
static inline void usbh_control_urb_fill(struct usbh_urb *urb,
struct usbh_hubport *hport,
struct usb_setup_packet *setup,
uint8_t *transfer_buffer,
uint32_t transfer_buffer_length,
uint32_t timeout,
usbh_complete_callback_t complete,
void *arg)
{
urb->hport = hport;
urb->ep = &hport->ep0;
urb->setup = setup;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = transfer_buffer_length;
urb->timeout = timeout;
urb->complete = complete;
urb->arg = arg;
}
static inline void usbh_bulk_urb_fill(struct usbh_urb *urb,
struct usbh_hubport *hport,
struct usb_endpoint_descriptor *ep,
uint8_t *transfer_buffer,
uint32_t transfer_buffer_length,
uint32_t timeout,
usbh_complete_callback_t complete,
void *arg)
{
urb->hport = hport;
urb->ep = ep;
urb->setup = NULL;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = transfer_buffer_length;
urb->timeout = timeout;
urb->complete = complete;
urb->arg = arg;
}
static inline void usbh_int_urb_fill(struct usbh_urb *urb,
struct usbh_hubport *hport,
struct usb_endpoint_descriptor *ep,
uint8_t *transfer_buffer,
uint32_t transfer_buffer_length,
uint32_t timeout,
usbh_complete_callback_t complete,
void *arg)
{
urb->hport = hport;
urb->ep = ep;
urb->setup = NULL;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = transfer_buffer_length;
urb->timeout = timeout;
urb->complete = complete;
urb->arg = arg;
urb->interval = USBH_GET_URB_INTERVAL(ep->bInterval, hport->speed);
}
extern struct usbh_bus g_usbhost_bus[];
#ifdef USBH_IRQHandler
#error USBH_IRQHandler is obsolete, please call USBH_IRQHandler(xxx) in your irq
#endif
/**
* @brief Submit an control transfer to an endpoint.
* This is a blocking method; this method will not return until the transfer has completed.
* Default timeout is 500ms.
*
* @param pipe The control endpoint to send/receive the control request.
* @param setup Setup packet to be sent.
* @param buffer buffer used for sending the request and for returning any responses.
* @return On success will return 0, and others indicate fail.
*/
int usbh_control_transfer(struct usbh_hubport *hport, struct usb_setup_packet *setup, uint8_t *buffer);
/**
* @brief Retrieves a USB string descriptor from a specific hub port.
*
* This function is responsible for retrieving the USB string descriptor
* with the specified index from the USB device connected to the given hub port.
* The retrieved descriptor is stored in the output buffer provided.
*
* @param hport Pointer to the USB hub port structure.
* @param index Index of the string descriptor to retrieve.
* @param output Pointer to the buffer where the retrieved descriptor will be stored.
* @return On success will return 0, and others indicate fail.
*/
int usbh_get_string_desc(struct usbh_hubport *hport, uint8_t index, uint8_t *output);
/**
* @brief Sets the alternate setting for a USB interface on a specific hub port.
*
* This function is responsible for setting the alternate setting of the
* specified USB interface on the USB device connected to the given hub port.
* The interface and alternate setting are identified by the respective parameters.
*
* @param hport Pointer to the USB hub port structure.
* @param intf Interface number to set the alternate setting for.
* @param altsetting Alternate setting value to set for the interface.
* @return On success will return 0, and others indicate fail.
*/
int usbh_set_interface(struct usbh_hubport *hport, uint8_t intf, uint8_t altsetting);
int usbh_initialize(uint8_t busid, uintptr_t reg_base);
int usbh_deinitialize(uint8_t busid);
void *usbh_find_class_instance(const char *devname);
int lsusb(int argc, char **argv);
#ifdef __cplusplus
}
#endif
#endif /* USBH_CORE_H */