You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

166 lines
3.8 KiB

CUR_DIR := $(STANDALONE_DIR)
SRC_DIR += $(CUR_DIR)/common \
$(CUR_DIR)/arch/common
INC_DIR += $(CUR_DIR)/common \
$(CUR_DIR)/arch/common
ifndef CONFIG_USE_CACHE
EXCL_SRC += $(CUR_DIR)/common/cache.c
endif
ifndef CONFIG_USE_MMU
EXCL_SRC += $(CUR_DIR)/common/mmu.c
endif
##########################arch####################################
ifdef CONFIG_TARGET_ARMV8_AARCH64
SRC_DIR += $(CUR_DIR)/arch/armv8/aarch64 \
$(CUR_DIR)/arch/armv8/aarch64/gcc
INC_DIR += $(CUR_DIR)/arch/armv8/aarch64/gcc \
$(CUR_DIR)/arch/armv8/aarch64
endif #CONFIG_TARGET_ARMV8_AARCH64
ifdef CONFIG_TARGET_ARMV8_AARCH32
SRC_DIR += $(CUR_DIR)/arch/armv8/aarch32 \
$(CUR_DIR)/arch/armv8/aarch32/gcc
INC_DIR += $(CUR_DIR)/arch/armv8/aarch32/gcc \
$(CUR_DIR)/arch/armv8/aarch32
endif #CONFIG_TARGET_ARMV8_AARCH32
ifdef CONFIG_TARGET_ARMV7
SRC_DIR += $(CUR_DIR)/arch/armv7/gcc
endif #CONFIG_TARGET_ARMV7
##########################board####################################
SRC_DIR += $(CUR_DIR)/board/common
INC_DIR += $(CUR_DIR)/board/common
ifdef CONFIG_TARGET_F2000_4
SRC_DIR += $(CUR_DIR)/board/ft2004
INC_DIR += $(CUR_DIR)/board/ft2004
endif
ifdef CONFIG_TARGET_E2000
SRC_DIR += $(CUR_DIR)/board/e2000
INC_DIR += $(CUR_DIR)/board/e2000
endif
ifdef CONFIG_TARGET_D2000
SRC_DIR += $(CUR_DIR)/board/d2000
INC_DIR += $(CUR_DIR)/board/d2000
endif
##########################drivers####################################
# gic
ifdef CONFIG_EBABLE_GICV3
SRC_DIR += $(CUR_DIR)/drivers/gic/gicv3
INC_DIR += $(CUR_DIR)/drivers/gic/gicv3
endif
# timer
ifdef CONFIG_ENABLE_TIMER_TACHO
SRC_DIR += $(CUR_DIR)/drivers/timer/hw_timer_tacho
INC_DIR += $(CUR_DIR)/drivers/timer/hw_timer_tacho
endif
# qspi
ifdef CONFIG_USE_NOR_QSPI
SRC_DIR += $(CUR_DIR)/drivers/qspi/nor_qspi
INC_DIR += $(CUR_DIR)/drivers/qspi/nor_qspi
endif #CONFIG_USE_QSPI
# usart
ifdef CONFIG_ENABLE_Pl011_UART
SRC_DIR += $(CUR_DIR)/drivers/serial/fpl011
INC_DIR += $(CUR_DIR)/drivers/serial/fpl011
endif #CONFIG_ENABLE_Pl011_UART
# gpio
ifdef CONFIG_ENABLE_F_GPIO
SRC_DIR += $(CUR_DIR)/drivers/gpio/f_gpio
INC_DIR += $(CUR_DIR)/drivers/gpio/f_gpio
endif
# spi
ifdef CONFIG_ENABLE_FSPI
SRC_DIR += $(CUR_DIR)/drivers/spi/f_spi
INC_DIR += $(CUR_DIR)/drivers/spi/f_spi
endif
# iomux
ifdef CONFIG_ENABLE_FIOMUX
SRC_DIR += $(CUR_DIR)/drivers/iomux/f_iomux
INC_DIR += $(CUR_DIR)/drivers/iomux/f_iomux
endif
# eth
ifdef CONFIG_ENABLE_F_XMAC
SRC_DIR += $(CUR_DIR)/drivers/eth/f_xmac
INC_DIR += $(CUR_DIR)/drivers/eth/f_xmac
endif
ifdef CONFIG_ENABLE_F_GMAC
SRC_DIR += $(CUR_DIR)/drivers/eth/f_gmac \
$(CUR_DIR)/drivers/eth/f_gmac/phy
INC_DIR += $(CUR_DIR)/drivers/eth/f_gmac \
$(CUR_DIR)/drivers/eth/f_gmac/phy
ifdef CONFIG_F_GMAC_PHY_AR803X
SRC_DIR += $(CUR_DIR)/drivers/eth/f_gmac/phy/ar803x
INC_DIR += $(CUR_DIR)/drivers/eth/f_gmac/phy/ar803x
endif
endif
# can
ifdef CONFIG_ENABLE_F_CAN
SRC_DIR += $(CUR_DIR)/drivers/can/ft_can
INC_DIR += $(CUR_DIR)/drivers/can/ft_can
endif
# pcie
ifdef CONFIG_ENABLE_F_PCIE
SRC_DIR += $(CUR_DIR)/drivers/pcie/fpcie
INC_DIR += $(CUR_DIR)/drivers/pcie/fpcie
endif
# i2c
ifdef CONFIG_USE_FI2C
SRC_DIR += $(CUR_DIR)/drivers/i2c/fi2c
INC_DIR += $(CUR_DIR)/drivers/i2c/fi2c
endif
# sdmmc
ifdef CONFIG_USE_F_SDMMC
SRC_DIR += $(CUR_DIR)/drivers/mmc/f_sdmmc
INC_DIR += $(CUR_DIR)/drivers/mmc/f_sdmmc
endif
# sdio
ifdef CONFIG_USE_F_SDIO
SRC_DIR += $(CUR_DIR)/drivers/mmc/f_sdio
INC_DIR += $(CUR_DIR)/drivers/mmc/f_sdio
endif
#wdt
ifdef CONFIG_ENABLE_FWDT
SRC_DIR += $(CUR_DIR)/drivers/watchdog/fwdt
INC_DIR += $(CUR_DIR)/drivers/watchdog/fwdt
endif
# dma
ifdef CONFIG_ENABLE_F_GDMA
SRC_DIR += $(CUR_DIR)/drivers/dma/gdma
INC_DIR += $(CUR_DIR)/drivers/dma/gdma
endif
#nand
ifdef CONFIG_ENABLE_FNAND
SRC_DIR += $(CUR_DIR)/drivers/nand/fnand
INC_DIR += $(CUR_DIR)/drivers/nand/fnand
endif