add more contents

style/xecjk_preamble.tex

@@ -12,7 +12,7 @@
 %\usepackage[fontset=adobe,punct=quanjiao]{ctex}
 \usepackage{bookman}
 \usepackage[OT1]{fontenc}
-\usepackage[punct=quanjiao]{ctex}
+%\usepackage[punct=quanjiao]{ctex}
 
 % variable fonts
 
@@ -31,8 +31,7 @@
 %    BoldFeatures={RawFeature={+axis={wght=700}}},
 %    BoldItalicFeatures={RawFeature={+axis={wght=1000}}}
 %]{Source Han Sans TC VF}
-
+\usepackage[fontset=puhui,punct=quanjiao]{ctex}
-%\usepackage[fontset=puhui,punct=quanjiao]{ctex}
 %\usepackage[fontset=windows,punct=quanjiao]{ctex}
 %% 针对中文进行断行
 %\XeTeXlinebreaklocale "zh"

tex/deploy.tex

@@ -1,8 +1,72 @@
-\chapter{程序文件烧写}
+\chapter{系统安装}
 
-电脑需要安装瑞芯微的 USB 驱动程序。
+\section{烧写系统文件}
+电脑需要安装瑞芯微的 USB 驱动程序。接上 USB 线，运行 TKDevTool.exe，上电进入 maskrom 模式：
 \begin{figure}[H]
     \centering
     \includegraphics[width=\textwidth]{burn.png}
     \caption{RKDevTooL 配置}
 \end{figure}
+
+\section{配置系统}
+在调试串口上按住 {\kx「}CTRL-C{\kx」}并上电开机，将调试串口停止在 U-Boot 的命令行上，
+用 {\kx「}\textcolor{blue!80}{\tt setsn}{\kx」}，将板卡的编号设置进去，例如：
+
+\begin{figure}[H]
+    \centering
+\begin{tikzpicture}
+    \node [anchor=south west, inner sep=0] (image) at (0,0) {
+\begin{tcolorbox}[colframe=gray!20]
+    \begin{footnotesize}
+\begin{Verbatim}
+=> setsn A2246002
+Generate  ethaddr: 72:a2:24:60:02:01
+Generate eth1addr: 72:a2:24:60:02:02
+Writing to MMC(0)... done
+\end{Verbatim}
+\end{footnotesize}
+\end{tcolorbox}
+    };
+    \begin{scope}[
+        x={($0.1*(image.south east)$)},
+        y={($0.1*(image.north west)$)}
+        ]
+        % grid for debugging
+        %\draw [lightgray, step=1] (image.south west) grid (image.north east);
+        %\foreach \x in {0, 1, ..., 10} {\node [below] at (\x, 0) {\x};}
+        %\foreach \y in {0, 1, ..., 10} {\node [left] at (0, \y) {\y};}
+        \draw [red,thick, rounded corners] (0.7, 7.0) rectangle (2.6, 9.0);
+    \end{scope}
+\end{tikzpicture}
+\caption{设置板卡编号}
+\end{figure}
+
+将板卡名称设置为项目名并保存，例如：
+\begin{figure}[H]
+    \centering
+\begin{tikzpicture}
+    \node [anchor=south west, inner sep=0] (image) at (0,0) {
+\begin{tcolorbox}[colframe=gray!20]
+    \begin{footnotesize}
+\begin{Verbatim}
+=> setenv board_name SY-3588J01A
+=> saveenv
+Saving Environment to MMC...
+Writing to MMC(0)... done
+\end{Verbatim}
+\end{footnotesize}
+\end{tcolorbox}
+    };
+    \begin{scope}[
+        x={($0.1*(image.south east)$)},
+        y={($0.1*(image.north west)$)}
+        ]
+        % grid for debugging
+        %\draw [lightgray, step=1] (image.south west) grid (image.north east);
+        %\foreach \x in {0, 1, ..., 10} {\node [below] at (\x, 0) {\x};}
+        %\foreach \y in {0, 1, ..., 10} {\node [left] at (0, \y) {\y};}
+        \draw [red,thick, rounded corners] (0.7, 5.0) rectangle (4.5, 9.0);
+    \end{scope}
+\end{tikzpicture}
+\caption{设置板卡名称}
+\end{figure}

tex/issue.tex

@@ -90,3 +90,51 @@ sysmem_dump_all:
 如果你要更改规则，需要先将文件{\small \texttt{80-net-setup-link.rules从/lib/udev/rules.d}} 目录复制到 {\small \texttt{/etc/udev/rules.d}} 目录。
 因为 {\small \texttt{/etc/udev/rules.d}} 目录下规则的优先级高于 {\small \texttt{/lib/udev/rules.d}} 目录，识别网卡并命名时，
 会优先从 {\small \texttt{/etc/udev/rules.d}} 目录下寻找规则文件。将 {\small \texttt{ID\_NET\_NAME}} 改成 {\small \texttt{ID\_NET\_SLOT}} 即可。
+
+\section{rc.local 脚本没执行}
+
+编辑 {\small \verb+/usr/lib/systemd/system/rc-local.service+} 文件，添加以下内容：
+\begin{minted}[bgcolor=lightgray!30,fontsize=\small]{ini}
+[Install]
+WantedBy=multi-user.target
+\end{minted}
+然后执行下面命令开启 {\small \verb+rc-local.service+} 服务：
+\begin{minted}[bgcolor=lightgray!30,fontsize=\small]{bash}
+systemctl enable rc-local.service
+\end{minted}
+
+\begin{comment}
+ip -details -json link show | jq -r '
+.[] | 
+      if .linkinfo.info_kind // .link_type == "loopback" then
+          empty
+      else
+          .ifname
+      end
+'
+
+ip -details -json link show | jq -r '
+.[] | 
+      if .ifname == "eth0" then
+          .address
+      end
+'
+\end{comment}
+\begin{comment}
+ip -details -json address show | jq --join-output '
+.[] | 
+      if .linkinfo.info_kind // .link_type == "loopback" then
+          empty
+      else
+          .ifname ,
+          ( ."addr_info"[] |
+              if .family == "inet" or .family == "inet6" then
+                  " " + .local
+              else
+                  empty
+              end
+          ),
+          "\n"
+      end
+'
+\end{comment}

tex/wsl2.tex

@@ -16,7 +16,7 @@ wsl -t <子系统名>
 wsl --export <子系统名> <保存路径>
     \end{minted}
     例如：
-    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{bash}
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{pwsh}
 wsl --export Ubuntu-22.04 e:\ubuntu-22.04-wsl2.zip
     \end{minted}
    \item 注销子系统：
@@ -29,7 +29,7 @@ wsl --unregister <子系统名>
 wsl --import <子系统名> <子系统安装路径> <子系统保存路径>
     \end{minted}
     例如：
-    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{bash}
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{pwsh}
 wsl --import Ubuntu-22.04 e:\wls2\ubuntu2204 e:\ubntu-22.04-wsl2.zip
     \end{minted}
    \item 修改默认登录用户：
@@ -52,7 +52,7 @@ ubuntu2204.exe config --default-user <默认用户名>
 wsl --mount --vhd <pathToVHD>
     \end{minted}
     例如：
-    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{bash}
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small,style=bw]{pwsh}
 wsl --mount --vhd e:\wsl2\rk3588\rk3588.vhdx --partition 1 --name rk3588
     \end{minted}
 
@@ -87,3 +87,23 @@ lsusb
 usbipd detach --busid <busid>
     \end{minted}
 \end{enumerate}
+
+\section{Windows 端口转发}
+按下面的步骤进行设置：
+\begin{enumerate}[(1), nosep]
+ \item 管理员权限启动windows powershell，运行如下代码。这里以设置80端口转发WSL的地址的80端口为例：
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{pwsh}
+netsh interface portproxy add v4tov4 listenport=80 \
+    listenaddress=0.0.0.0 connectport=80 \
+    connectaddress=172.19.11.104 protocol=tcp
+    \end{minted}
+    \item 查看端口转发情况：
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{bash}
+netsh interface portproxy show all
+    \end{minted}
+    \item 删除端口转发：
+    \begin{minted}[bgcolor=lightgray!30,fontsize=\small]{pwsh}
+netsh interface portproxy delete v4tov4 listenport=80  \
+    listenaddress=0.0.0.0
+    \end{minted}
+\end{enumerate}