You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
141 lines
3.6 KiB
141 lines
3.6 KiB
/*
|
|
* Copyright (c) 2017
|
|
* Patrice Chotard <patrice.chotard@st.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <mmc.h>
|
|
#include <sdhci.h>
|
|
#include <asm/arch/sdhci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct sti_sdhci_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
/*
|
|
* used to get access to MMC1 reset,
|
|
* will be removed when STi reset driver will be available
|
|
*/
|
|
#define STIH410_SYSCONF5_BASE 0x092b0000
|
|
|
|
/**
|
|
* sti_mmc_core_config: configure the Arasan HC
|
|
* @regbase: base address
|
|
* @mmc_instance: mmc instance id
|
|
* Description: this function is to configure the Arasan MMC HC.
|
|
* This should be called when the system starts in case of, on the SoC,
|
|
* it is needed to configure the host controller.
|
|
* This happens on some SoCs, i.e. StiH410, where the MMC0 inside the flashSS
|
|
* needs to be configured as MMC 4.5 to have full capabilities.
|
|
* W/o these settings the SDHCI could configure and use the embedded controller
|
|
* with limited features.
|
|
*/
|
|
static void sti_mmc_core_config(const u32 regbase, int mmc_instance)
|
|
{
|
|
unsigned long *sysconf;
|
|
|
|
/* only MMC1 has a reset line */
|
|
if (mmc_instance) {
|
|
sysconf = (unsigned long *)(STIH410_SYSCONF5_BASE +
|
|
ST_MMC_CCONFIG_REG_5);
|
|
generic_set_bit(SYSCONF_MMC1_ENABLE_BIT, sysconf);
|
|
}
|
|
|
|
writel(STI_FLASHSS_MMC_CORE_CONFIG_1,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_1);
|
|
|
|
if (mmc_instance) {
|
|
writel(STI_FLASHSS_MMC_CORE_CONFIG2,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_2);
|
|
writel(STI_FLASHSS_MMC_CORE_CONFIG3,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_3);
|
|
} else {
|
|
writel(STI_FLASHSS_SDCARD_CORE_CONFIG2,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_2);
|
|
writel(STI_FLASHSS_SDCARD_CORE_CONFIG3,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_3);
|
|
}
|
|
writel(STI_FLASHSS_MMC_CORE_CONFIG4,
|
|
regbase + FLASHSS_MMC_CORE_CONFIG_4);
|
|
}
|
|
|
|
static int sti_sdhci_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct sti_sdhci_plat *plat = dev_get_platdata(dev);
|
|
struct sdhci_host *host = dev_get_priv(dev);
|
|
int ret, mmc_instance;
|
|
|
|
/*
|
|
* identify current mmc instance, mmc1 has a reset, not mmc0
|
|
* MMC0 is wired to the SD slot,
|
|
* MMC1 is wired on the high speed connector
|
|
*/
|
|
|
|
if (fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "resets", NULL))
|
|
mmc_instance = 1;
|
|
else
|
|
mmc_instance = 0;
|
|
|
|
sti_mmc_core_config((const u32) host->ioaddr, mmc_instance);
|
|
|
|
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
|
|
SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_NO_HISPD_BIT;
|
|
|
|
host->host_caps = MMC_MODE_DDR_52MHz;
|
|
|
|
ret = sdhci_setup_cfg(&plat->cfg, host, 50000000, 400000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->mmc = &plat->mmc;
|
|
host->mmc->priv = host;
|
|
host->mmc->dev = dev;
|
|
upriv->mmc = host->mmc;
|
|
|
|
return sdhci_probe(dev);
|
|
}
|
|
|
|
static int sti_sdhci_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_priv(dev);
|
|
|
|
host->name = strdup(dev->name);
|
|
host->ioaddr = (void *)devfdt_get_addr(dev);
|
|
|
|
host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"bus-width", 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sti_sdhci_bind(struct udevice *dev)
|
|
{
|
|
struct sti_sdhci_plat *plat = dev_get_platdata(dev);
|
|
|
|
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct udevice_id sti_sdhci_ids[] = {
|
|
{ .compatible = "st,sdhci" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sti_mmc) = {
|
|
.name = "sti_sdhci",
|
|
.id = UCLASS_MMC,
|
|
.of_match = sti_sdhci_ids,
|
|
.bind = sti_sdhci_bind,
|
|
.ops = &sdhci_ops,
|
|
.ofdata_to_platdata = sti_sdhci_ofdata_to_platdata,
|
|
.probe = sti_sdhci_probe,
|
|
.priv_auto_alloc_size = sizeof(struct sdhci_host),
|
|
.platdata_auto_alloc_size = sizeof(struct sti_sdhci_plat),
|
|
};
|
|
|